Dewesoft Blog(Page 2)

Product Updates

DewesoftX 2026.2 introduces tools that streamline data analysis and visualization. Key additions include a Data Merger for combining or comparing files, a Clean-Up Marker for removing signal disturbances, and customizable widget templates. The update also enhances Campbell plots, adds a new EIS analyzer and improved power tools, and expands hardware support, making workflows faster and more flexible.

EK

Eva Kalšek

Apr 22, 2026

Data Acquisition Knowledge Base

Supraharmonics, high-frequency disturbances between 2 kHz and 150 kHz, are an emerging power quality challenge in modern grids driven by widespread use of power electronic devices such as EV chargers and inverters. Unlike traditional harmonics, they are non-synchronous and harder to measure, yet can cause significant voltage distortion, equipment stress, and system instability. Addressing them requires advanced measurement tools, deeper analysis, and new standards.

GS

Grant Maloy Smith

Apr 17, 2026

Case Studies

AI-driven data transformation improves EV battery management by turning complex measurement data into accurate predictive models. Using Dewesoft’s high-precision data acquisition and ETAS’s modeling tools, the integrated toolchain enhances State of Charge estimation and range prediction. This reduces range anxiety, enables real-time decision-making, and supports more reliable, efficient, and intelligent electric vehicle systems.

Case Studies

A dynamic-response-based framework enables early detection of structural degradation in complex historic sites by combining continuous monitoring with BIM, GIS, and Digital Twins. Applications in Pozzuoli and Pompeii show how subtle performance changes can be tracked and translated into actionable indicators, supporting proactive risk management, maintenance planning, and informed decision-making under evolving hazard conditions.

Case Studies

E-Team Squadra Corse validated electrical and thermal models of a Formula SAE electric race car using high-precision Dewesoft measurements during endurance testing. The results showed high accuracy, with battery voltage error below 2% and motor temperature within 5°C, enabling reliable real-time models for predictive power and thermal management and improved race performance.

Case Studies

Faraday Rocketry UPV improved rocket motor testing using a Dewesoft DAQ system, enabling precise thrust and temperature measurements under extreme conditions. The new setup simplified data collection, reduced noise, and enabled real-time analysis. It helped identify ignition issues and cut ignition time from seconds to 72 ms, improving performance and reliability.

Case Studies

ESO is deploying a permanent vibration monitoring system for the Extremely Large Telescope using low-noise Dewesoft IOLITE MEMS accelerometers and DewesoftX software. Early phase-one data already shows how wind, construction activity, and earthquakes affect the telescope and dome, helping engineers verify performance, track trends, and protect optical stability.

Case Studies

Synchronized, multi-band magnetic field measurements in electric vehicles transform electromagnetic emissions from compliance data into a valuable diagnostic tool. By capturing repeatable magnetic signatures during real driving, engineers can identify subsystem behavior, detect gear shifts, and reveal early faults or tampering, all without access to internal signals, enabling predictive maintenance and improved system observability.

Case Studies

A battery-free wireless telemetry system enables direct, real-time measurement of bearing temperature inside high-performance electric powertrains. Applied to Ferrari’s MGU-K, it captures previously inaccessible thermal data on rotating components, revealing early signs of friction and degradation. Integrated with DewesoftX, it supports predictive maintenance, improved reliability, and performance optimization under real operating conditions.

Data Acquisition Knowledge Base

In this article, you will learn about the different types of A/D converters used in data acquisition systems and the basic technology of each type of ADC.

GS

Grant Maloy Smith

Apr 13, 2026

Case Studies

Eu-BEST is building a shared, modular rocket test infrastructure to replace Europe’s costly, launcher-specific facilities. Focused on the ground segment, where nearly all lifecycle cost and risk sit, it offers standardized benches, universal interfaces, real-time control, and digital twins to speed testing, cut duplication, and support up to 200 tests per year, making access easier for emerging space companies.

Case Studies

DARTS-PL is building an open, high-resolution dataset for autonomous vehicle perception in Poland, using synchronized cameras, lidars, radars, GNSS/IMU, and thermal imaging in DewesoftX. By capturing real roads, seasons, weather, and edge cases, it helps reduce geographic bias in AV training and supports safer, more reliable testing for Central and Eastern Europe.

Case Studies

A 135 MW Francis turbine developed recurring runner crown cracks after decades of operation, culminating in catastrophic failure. Monitoring revealed a persistent 140 Hz vibration linked to rotor–stator interaction. Modal analysis showed this excitation matched a natural frequency of the runner–shaft system, confirming resonance as the main cause of crack initiation and growth.

Data Acquisition Knowledge Base

Data acquisition software simplifies data collection, analysis, and recording from various sensors and devices. There are several data acquisition software packages available in the market, each with its own strengths and features. Read the article to see the list.

PR

Primož Rome

Mar 25, 2026

Data Acquisition Knowledge Base

History of data acquisition article shows how the industry evolved from early strip chart and tape recorders into the modern digital data acquisition era.

GS

Grant Maloy Smith

Mar 25, 2026

Data Acquisition Knowledge Base

We gathered the complete list of data acquisition companies on all markets and applications. See what are the leading brands in the DAQ market in 2022.

PR

Primož Rome

Mar 25, 2026

Data Acquisition Knowledge Base

An up-to-date interactive list of automotive proving grounds for vehicle testing. Search for test tracks, proving grounds, and other vehicle test facilities.

PR

Primož Rome

Mar 25, 2026

Data Acquisition Knowledge Base

The complete guide to data acquisition (DAQ). Learn how DAQ systems work and what are the basic elements of modern digital data acquisition systems.

GS

Grant Maloy Smith

Mar 25, 2026

Application Notes

DewesoftX streamlines data acquisition by combining sensor databases with TEDS smart sensors to automate setup and reduce errors. Stored sensor data enables fast, consistent configuration, while TEDS reads sensor information automatically for plug-and-measure operation. Together, these tools improve efficiency, ensure reliable measurements, and support complex testing across industries.

GS

Grant Maloy Smith

Mar 23, 2026

Case Studies

The Hangar Bridge in Trondheim, Norway, is Scandinavia’s first pedestrian bridge built entirely from recycled aluminum. To study its lightweight structural behavior and support future aluminum bridge design standards, NTNU and Dewesoft Monitoring installed a permanent structural health monitoring system using accelerometers, strain gauges, and synchronized daisy-chained data acquisition technology. The system provides long-term data on the bridge’s performance and dynamic response.

DC

Daniel Colmenares

Mar 4, 2026

Product Updates

DewesoftX 2026.1 introduces real-time Online SRS processing for shock trending, enhanced Modal Test and Analysis optimized for thousands of FRFs, and a new steady-speed mode in Rotating Machinery Analysis. Human Body Vibration gains visual filter guidance and improved channel handling, while the Navion plugin adds firmware upload and the DS-IMU plugin supports the new DS-IMU-N1 unit.

EK

Eva Kalšek

Feb 26, 2026

Data Acquisition Knowledge Base

End-of-line testing is the final quality gate in manufacturing, verifying that fully assembled products meet performance, safety, and regulatory requirements before shipment. Using automated test equipment, sensors, and data acquisition systems, EOL testing simulates real operating conditions, detects hidden defects, ensures traceability, and provides actionable data that improves reliability, reduces recalls, and supports continuous process improvement across industries.

GS

Grant Maloy Smith

Dec 30, 2025

Case Studies

During construction of Vienna’s DC Tower 2, engineers used real-time vibration monitoring, Dewesoft MEMS sensors, and a digital twin to track the tower’s actual stiffness and wind response. The live data revealed the structure was far stiffer than design estimates, cutting predicted top acceleration by about 30 percent and confirming that a tuned mass damper was unnecessary, saving several floors and around two million euros.

KS

Konrad Schweiger

Dec 30, 2025

Application Notes

The article explains how DewesoftX integrates with Optris thermal cameras to deliver fully synchronized thermal imaging and temperature measurement alongside analog, CAN, GPS, and other DAQ data. Using a BMW XM engine warm-up example, it shows how high-speed thermal video, extracted temperature channels, and sensor data combine into a complete thermal-mechanical view for advanced testing and R&D applications.

KD

Kayla Day

Dec 29, 2025