What kind of sensors can I connect to SIRIUS data acquisition systems?

SIRIUS data acquisition system offers a full range of signal amplifiers available that can condition almost any signal. You can connect voltage, high-voltage, IEPE, charge, strain gauge based sensors (quarter-bridge, half-bridge, and full-bridge), load cells, thermocouple, RTD, LVDT, current. You can check the SIRIUS tech specs page for the full list of different amplifiers available.

What is DualCoreADC® technology?

The <a href="https://youtu.be/mzNyTn3W42s" target="_blank" rel="noopener">DualCoreADC® technology</a> solves often faced problems with signal measurement - input overload, noise, and artificial frequencies in the signal caused by aliasing. The input signal can be higher than expected (out-of-range) and therefore clipped by the A/D converter. With SIRIUS data acquisition systems, each input channel amplifier has two ADC's that always measure the high and low gain of the input signal. This results in the full possible measuring range of the sensor and prevents the signal from being clipped. With DualCoreADC® technology SIRIUS DAQ hardware achieves more than 130 dB signal-to-noise ratio and more than 160 dB in dynamic range. This is 20 times better than standard 24-bit data acquisition systems and 20 times less noise.

What sampling rates does SIRIUS DAQ systems offer?

SIRIUS data acquisition devices offer four different types of signal conditioners (or amplifiers) that offer different sampling rates: <ul> <li>SIRIUS DualCoreADC® amplifiers: 8 analog input channels per SIRIUS slice with a 200 kHz sampling rate per channel. Uses dual 24-bit Sigma-delta ADCs per input channel.</li> <li>SIRIUS HD (High Density) amplifiers: 16 analog input channels per SIRIUS slice with a 200 kHz sampling rate per channel. Uses a single 24-bit Sigma-delta ADC per input channel.</li> <li>SIRIUS HS (High Speed) amplifiers: 8 analog input channels per SIRIUS slice with a 1 MHz sampling rate per channel. Uses single 16-but SAR ADC per input channel. </li> <li>SIRIUS XHS (Extra High Speed) amplifiers: 8 analog input channels per SIRIUS slice with up to 15 MS/s sampling rate per channel. Uses our latest HybridADC® signal conditioning technology.</li> </ul> The sampling rate is software selectable globally for all input channels or separately for every individual input channel.

Are SIRIUS data acquisition system galvanically isolated?

Yes. SIRIUS DAQ devices feature a high galvanic channel-to-channel and channel-to-ground isolation (CAT II ±1000 V and CAT III ±600 V). SIRIUS amplifiers also offer isolated sensor excitation. You can learn more about in the <a href="https://www.youtube.com/watch?v=d71V0pjZbZ0" target="_blank" rel="noopener">SIRIUS galvanic isolation demonstration video</a>.

Do Dewesoft data acquisition systems really come with 7-year warranty?

The Dewesoft 7-Year warranty applies to all our data acquisition systems. You buy it, own it, use it, and our warranty keeps you covered. We build our equipment to last. We guarantee you that your hardware will be free from defects and functional. Our warranty covers that the instruments function as promised for a period of 7 years from the day of the delivery.

Do Dewesoft DAQ systems really include free software?

Yes! All Dewesoft data acquisition systems are bundled with DewesoftX Professional data acquisition software for no extra charge. DewesoftX Professional includes features for data storing, visualization, export, reporting, and a wide math library for signal processing. Please note that some advanced signal processing and application-specific software features are paid options. See the DewesoftX feature matrix to compare DewesoftX versions.

Are DewesoftX software updates free of charge?

Yes. All the updates to DewesoftX software are free forever for existing Dewesoft users. We release a new major version every two months. All the performance updates, new features, and bug fixes are available for the upgrade by <a href="https://download.dewesoft.com" target="_blank" rel="noopener">downloading</a> and running the installer from the website.

What are the minimum requirements to run DewesoftX software?

DewesoftX software will work on almost any PC which can run Windows operating system (32-bit or 64-bit versions). DewesoftX is compatible with Windows 7, Windows 10, Windows 11, or Windows Server 2016. Recommended PC specifications: <ul> <li>Processor: Intel Core i7 with 4 Cores (3rd generation or higher)</li> <li>Memory (RAM): 8 GB</li> <li>Storage: Solid-state drive (SSD)</li> <li>Graphics card: Compatible with DirectX 11</li> <li>Display: 1280x720 (HD Ready)</li> <li>Operating system: Windows 10 64-bit</li> </ul> Actual requirements may vary for different data acquisition configurations and your signal processing requirements. For more information, read this <a href="https://support.dewesoft.com/en/support/solutions/articles/14000102973-dewesoftx-system-requirements" target="_blank" rel="noopener">support article</a>.

Is there an educational discount for using DewesoftX software for education?

Yes. We offer an educational version of DewesoftX at a very attractive price. The educational version offers all advanced signal processing modules and can be ordered with or without Dewesoft data acquisition hardware. Please contact your local distributor to get more information on Educational packages.

Do you offer evaluation version of DewesoftX?

Yes. We offer a fully unlocked 4-week evaluation version of DewesoftX software. You can download the DewesoftX installer and obtain your evaluation license.

12 reviews

SIRIUS® R1DB/R2DB/R8DBPortable Power Analyzers

Name: SIRIUS® R1DB/R2DB/R8DB
Brand: Dewesoft®
Rating: 4.8 (19 reviews)

SIRIUS® R1DB, R2DB, and R8DB are compact, high-dynamic portable power analyzers designed for maximum portability and efficiency. These systems include direct high voltage and current input amplifiers, a built-in data logger, a powerful data processing computer, a multi-touch display, and internal batteries.

Our portable power analyzers are versatile tools for any electrical power or power quality measurement, thanks to additional amplifiers and interfaces for measuring vibration, strain, temperature, torque, CAN, XCP, and other data sources.

Dewesoft SIRIUS R1DB/R2DB/R8DB portable power analyzers

15 MS/s/ch

5 MHz bandwidth

Voltage

High Voltage

Isolation CAT II 1000 V

Isolation CAT III 600 V

Current

AC current

DC current

IEPE

Charge

Strain and Stress

Full Bridge

Half Bridge

Quarter Bridge

LVDT

Counter and Encoder

Digital

Thermocouple

RTD

Resistance

CAN bus

OBDII

J1939

DSI compatible

TEDS compatible

Galvanic isolation ±1000 V

GPS and GLONASS

RTK

SSD

Touch screen

Battery

WI-FI

Ethernet

USB 2.0

USB 3.0

EtherCAT

0°C to +40°C

IP20

IRIG and GPS timecode

SIRIUS® R1DB/R2DB/R8DB highlights

All-in-one instruments

The SIRIUS® R1DB, R2DB, and R8DB portable power analyzers are fully integrated instruments designed for data acquisition and display. They feature secure built-in SSD data storage, a CPU, batteries for fully autonomous operation, and modern network connectivity.

Up to 32-phase measurements

The SIRIUS® portable power analyzers offer flexible configuration options, supporting up to 32-phase measurements with the SIRIUS® R8DB model. For smaller needs, the SIRIUS® R2DB model supports up to 8-phase measurements, and the SIRIUS® R1DB model supports up to 4-phase measurements.

1 MS/s sampling rate

Dewesoft portable power analyzers feature 16-bit SAR ADCs with acquisition speeds of up to 1 MS/s per channel. The sampling rate can be selected via software for each individual channel.

Direct high-voltage input

The SIRIUS® power analyzer can directly measure up to ±2000 V (overvoltage category CAT II 1000 V) on each high-voltage input. Multiple measurement ranges are available and can be selected via software for each channel.

0,03 % accuracy

Our measurement signal amplifiers offer high accuracy for voltage and current measurement, with a basic power accuracy down to 0.03%.

Additional inputs

Our power analyzer can also measure different signals such as IEPE, thermocouples, digital counters, speed, angle, GPS, CAN, XCP, FlexRay, video, etc. all fully synchronized.

Fully isolated

The "worry-free" solution provides isolation on the sensor side (channel-to-ground), channel-to-channel, and even isolated sensor excitation. It also provides less noise, no ground loops, and the best signal quality.

Easy to use

Dewesoft power analyzers offer plug-and-play capabilities with the award-winning DewesoftX software. The hardware and sensors are automatically detected. Just select the input channels and power parameters you wish to calculate, and the power analyzer module will handle the rest.

Isolated CAN bus inputs

The instruments feature isolated high-speed CAN bus and CAN FD inputs, with one port available on the SIRIUS® R1DB, two ports on the SIRIUS® R2DB, and eight ports on the SIRIUS® R8DB power analyzer.

EtherCAT expansipm port

All portable power analyzers come with an EtherCAT expansion port that provides built-in power, synchronization, and data transfer. This allows for easy extension of input channels using any of our EtherCAT-based DAQ systems, such as KRYPTON, IOLITE, or SIRIUS EtherCAT data acquisition systems.

Current sensors

We offer and support all types of current sensors, such as zero-flux current transducers, AC/DC current clamps, Rogowsky coils, and shunts. These sensors are true RMS sensors available in a variety of models and are powered directly by our power analyzers.

Integrated sensor power

Our power analyzers feature an integrated sensor power supply (excitation) that effortlessly power all the connected current transducers.

Raw data storage

Our power analyzers always store raw data, allowing you to recalculate all parameters in the post-processing stage.

Power calculations

The system calculates over 100 power parameters, including P, Q, S, PF, and cos phi. It also offers full raw data recording capabilities, as well as features like an oscilloscope, FFT, and harmonics analysis. These calculations can be performed both online and in post-processing.

GPU processing

Even at sample rates as high as 15 MS/s, the Power Analyzer software delivers real-time calculations by leveraging GPU multi-core graphics card processing.

Connectivity and interfaces

The built-in SBOX computer features modern connectivity options and interfaces, including Wireless LAN (WiFi), dual gigabit LAN, USB 3.0, GPS/GNSS, HDMI, and EtherCAT. Synchronization capabilities are also available.

Integrated GNSS with RTK

All portable DAQ systems can be equipped with an optional 10Hz or 100Hz GNSS receiver, allowing for precise GPS positioning in navigational testing applications. These GNSS receivers also offer optional RTK support, which can enhance positioning accuracy to 1 cm.

Dewesoft quality and 7-year warranty

Enjoy our industry-leading 7-year warranty. Our data acquisition systems are made in Europe, utilizing only the highest build quality standards. We offer free and customer-focused technical support. Your investment into the Dewesoft solutions is protected for years ahead.

Software included

Every Dewesoft data acquisition system is bundled with award-winning DewesoftX data acquisition software. The software is easy to use but very rich and deep in functionality. All software updates are free forever with no hidden licensing or yearly maintenance fees.

Safety

Our high-voltage amplifiers offer direct input of ±2000 V, 1600 V, CAT II 1000 V, and CAT III 600 V with high galvanic channel-to-channel isolation.

Overview of Dewesoft portable power analyzer

Dewesoft portable power analyzers are fully integrated data acquisition and display instruments with secure built-in data storage, batteries for fully autonomous operation, and modern network connectivity.

Powerful signal conditioning and signal processing capabilities ensure that our portable power analyzers are suitable for field, industrial, or lab electrical test and measurement applications. The high-galvanic isolation of the analog amplifiers and power supply circuits protects the instruments from ground loops and maintains the highest signal quality.

With easy integration of any type of current sensors and an integrated sensor power supply, the days of complicated sensor hookups and configurations are gone.

In summary, Dewesoft portable power analyzers are high-accuracy instruments offering 0.03% measurement accuracy on both voltage and current measurements, with high sampling rates and high bandwidth capability.

SIRIUS® R1DB: Portable 4-phase power analyzer

The SIRIUS® R1DB is the smallest all-in-one portable power analyzer in our lineup. Its compact design includes a built-in multi-touch LED screen, a powerful data processing CPU, an SSD data logger, and internal hot-swappable batteries for complete autonomous operation.

SIRIUS® R1DB hardware features:

Up to 4-phase measurement
Up to 4 high-voltage amplifiers with direct ±2000 V input (CAT II 1000 V, CAT III 600 V)
Up to 4 current input amplifiers
One high-speed CAN bus and CAN FD port
Up to 4 counter/encoder inputs
Up to 12 digital inputs
High resolution, multi-touch LED display
Integrated CPU
Up to 1 TB integrated SSD storage
Integrated keyboard and mouse

See full SIRIUS® R1DB technical specifications.

SIRIUS R1DB 4-phase portable power analyzer

SIRIUS® R2DB: Portable 8-phase power analyzer

The SIRIUS® R2DB is the bigger brother to the SIRIUS® R1DB. It shares the same compact all-in-one design but offers double the input channels. It also includes the same built-in multi-touch LED screen, powerful data processing CPU, SSD data logger, and internal hot-swappable batteries for complete autonomous operation.

SIRIUS® R2DB hardware features:

Up to 8-phase measurement
Up to 8 high-voltage amplifiers with direct ±2000 V input (CAT II 1000 V, CAT III 600 V)
Up to 8 current input amplifiers
Two high-speed CAN bus and CAN FD port
Up to 8 counter/encoder inputs
Up to 24 digital inputs
High resolution, multi-touch LED display
Integrated CPU
Up to 1 TB integrated SSD storage
Integrated keyboard and mouse

See full SIRIUS® R2DB technical specifications.

SIRIUS R2DB 8-phase portable power analyzer

SIRIUS® R8DB: High-channel portable power analyzer

The SIRIUS® R8DB is the biggest product in our all-in-one portable power analyzer line. It can measure up to 32-phases and also includes the biggest multi-touch LED screen and most capable data processing CPU, SSD data logger, and internal hot-swappable batteries for complete autonomous operation.

SIRIUS® R8DB hardware features:

Up to 32-phase measurement
Up to 32 high-voltage amplifiers with direct ±2000 V input (CAT II 1000 V, CAT III 600 V)
Up to 32 current input amplifiers
Eight high-speed CAN bus and CAN FD port
Up to 32 counter/encoder inputs
Up to 96 digital inputs
High resolution, multi-touch LED display
Integrated CPU
Up to 1 TB integrated SSD storage
Integrated keyboard and mouse

See full SIRIUS® R8DB technical specifications.

16-bit SAR ADC with high-speed sampling

Our portable power analyzers feature high-speed (HS) SIRIUS amplifiers equipped with 16-bit SAR ADCs. They offer a high 1 MHz bandwidth and acquisition rates of up to 1 MS/s per channel. These amplifiers are ideal for recording fast transients and applications that require a high sampling rate, such as power analysis.

Amplifiers for direct high-voltage (HV) inputs are available, as well as LV amplifiers for direct current sensor connections. Additionally, all power analyzers can be configured with other available amplifiers for strain gauge, IEPE, and charge signal conditioning, making our portable power analyzers truly multi-functional devices.

SIRIUS high speed (HS) amplifier schematic

Channel-to-channel galvanic isolation

SIRIUS DAQ devices offer high galvanic channel-to-channel and channel-to-ground isolation (±1000 V). The DAQ systems even offer isolated sensor excitation.

With such isolation, we have no problem measuring high voltage potentials and no problem with common-mode voltages. We are also safe with measurements like vibrations, temperatures, or any other measurement where non-isolated sensors are placed next to the high voltage potential against the DAQ system ground. In such cases, a non-isolated DAQ system would burn or at least give faulty wrong results. With SIRIUS it is just one thing less to worry about.

Digital isolation has another big advantage - preserving the frequency bandwidth of the amplifiers. SIRIUS provides "worry-free" measurements, less noise, no ground loops, and the best possible signal quality.

For less demanding measurement and lower-cost applications, SIRIUS DAQs are also available in a differential version where only power supply isolation is offered.

SuperCounters®: precise speed and angle measurement with counter and encoder sensors

Dewesoft data acquisition systems utilize a patented and registered trademark technology called SuperCounter®.

Counter inputs can measure the RPM and angle of rotating machines. In comparison to standard counters, which only output integer numbers one sample later (e.g. 1, 1, 2, 2, 3, 4), the Dewesoft SuperCounter inputs are able to extract accurate values like 1.37, 1.87, 2.37, etc. fully synchronized for time and amplitude.

This is done by measuring the exact time of the rising edge of the signal with an additional counter. Our SuperCounter inputs work on a 102.4 MHz time base, independent of the current analog sampling rate.

Counter inputs are fully synchronized with analog, CAN bus, and other data sources to enable easy applications like balancing, order tracking, and torsional vibrations.

Bright and high-resolution display

Our portable power analyzers have integrated high-resolution, high-brightness multi-touch WXGA display. The display provides enough resolution for all your visuals and enough visibility even in the harshest environments. The high-quality display allows wide viewing angles.

The displays sizes differ between different power analyzer models:

SIRIUS® R1DB and R2DB: Multi touch TFT 12.1'' with WXGA, 1280 x 800 pixels @ 60Hz
SIRIUS® R8DB: Multi touch TFT 17'' with Full-HD resolution

Included award-winning DewesoftX data acquisition software is optimized for touch-friendly operation. All DewesoftX visual controls and graphs are optimized and offer easy multi-touch gesture-based control.

Battery powered with built-in Li-ion batteries

Our portable power analyzers have built-in Li-Ion batteries, enabling full autonomy without any external power supply. This feature makes the systems truly portable and autonomous.

The batteries are hot-swappable, allowing you to exchange them during measurements without shutting down the system or interrupting your test.

When connected to an external AC power supply, the batteries will automatically charge, and power will be drawn from the connected AC source (included in the box).

Battery capacity:

SIRIUS® R1DB: 144 Wh (2 Li-Ion cells with 72 Wh)
SIRIUS® R2DB: 190 Wh (2 Li-Ion cells with 95 Wh)
SIRIUS® R8DB: 360 Wh (4 Li-Ion cells with 90 Wh)

Integrated GNSS positioning with RTK correction

The SBOX computer integrated into our portable power analyzer can be equipped with a 10 Hz or 100 Hz GNSS receiver for precise position measurement applications. These GNSS receivers also support RTK (Real-Time Kinematics) correction.

The GNSS receiver option adds position and velocity measurement capabilities to your portable power analyzer, enabling position-based test and measurement applications. The RTK correction option enhances positioning accuracy to within 1 cm.

A power analyzer equipped with GNSS capability is an ideal instrument for on-the-road measurements of all types of electric and hybrid vehicles.

Compatible with various current sensors

Correct current transducers are essential for electrical measurements. Our power analyzers are compatible with a wide range of different current sensors. We are offering different current sensor types that match perfectly with our power analyzers:

DC-CT® current transducers
Zero-Flux transducers
Iron-core current transformers
Hall-compensated current clamps
Fluxgate current clamps
Rogowsky coil current probes
Shunts

All our current sensors feature TEDS and can be powered directly from our power analyzers. For more information refer to:

DC-CT® current transducer product page
Current sensors product page

Sensor calibration and accuracy

Voltage and current transducers always have a frequency-dependent amplitude error and phase shift. With Dewesoft’s X unique software calibration technology, amplitude and phase can be corrected for the entire frequency range from DC up to 1 MHz.

All internal curves, such as filter response, are corrected inside the software. The Dewesoft sensor database includes correction curves for a variety of transducers, including iron-core clamps, AC/DC clamps, Rogowski coils, and grid current and voltage transducers.

Dewesoft current sensor phase and amplitude correction chart

Various wiring configurations with simple and intuitive setup

The DewesoftX data acquisition software offers a visual selection of different wiring schematics and provides power calculations for all possible connections.

Predefined Power Schematics:

Direct Current
Single-Phase
Two-Phase
Star Connection
Delta Connection
V Connection
Aron Connection
Combined Star/Delta Connection

These connections can be measured with or without currents. Thanks to the modular construction of our measurement devices and the multiple synchronized power modules in our software, Dewesoft can also analyze 6, 7, 9, or 12-phase motors.

To learn more about each connection, please look at the Dewesoft Power Analysis free online training or the Dewesoft Power Manual.

DewesoftX power analysis 3-phase start configuration

Raw Data Storage

Dewesoft power analyzers are designed to store raw data, capturing every detail of your measurements. This capability allows for post-processing recalculations and offline analysis, providing flexibility to revisit and reanalyze data as needed.

Storing raw data ensures that you can apply different calculations or corrections without repeating the measurement process, which is essential for complex analyses and long-term projects.

To manage storage demands, Dewesoft power analyzers feature datafile compression. This technology reduces file sizes significantly, making it easier to store large amounts of data without compromising quality.

In summary, Dewesoft power analyzers offer comprehensive raw data capture and advanced storage solutions, ensuring efficient data management and versatile post-processing capabilities for thorough and accurate power analysis.

DewesoftX raw data signal with sample points

Rich visualization

After setting up the power module, you can configure and customize the measurement screen. The most relevant display widgets for electrical power analysis and power quality include the following display widgets:

Digital Meters: Display various instantaneous values calculated by the power module with unit support. Learn more.
Recorder and X/Y Recorder: The Dewesoft power analyzer provides visual recorder displays for time-domain data, showing all parameters in individual intervals. The X/Y recorder can generate orbital plots online. Learn more about Recorder and X/Y recorder.
Scope: Shows waveforms of voltages and currents, including line-to-line (U12, U23, U31) and line-to-earth (U1, U2, U3) voltages. Learn more.
Vector-Scope: Visualizes the relationships between voltages and currents for up to 3-phase systems. Multiple vectorscopes and individual harmonics can be displayed simultaneously. The "transparent" function allows for direct comparisons of phasors. Learn more.
Harmonic FFT: Offers a simple and comprehensive analysis of harmonics for voltage, current, power, and reactive power, all synchronized to the fundamental frequency of the signal. Learn more.
Contour plot: A 2D graphical representation that uses contours or color-coded regions to display 3D data. This visualization technique helps to reveal patterns and relationships in complex datasets, such as efficiency maps for motors, making it easier to understand and analyze the information. Learn more.

DewesoftX power analyzer screen with scope, vector scope, recorder, and harmonics widgets

Electrical power calculations

The DewesoftX data acquisition software automatically calculates and stores raw data from voltage and current channels, as well as calculates and stores all power values such as:

Active Power (P), Reactive Power (Q), Apparent Power (S), Distortion Power (D)
Cos φ, Power Factor
P, Q, Cos φ for each harmonic

Multiple power system calculations

With Dewesoft power analyzer systems, you can measure multiple power systems simultaneously. For example, the Dewesoft R8D DAQ system can synchronously measure up to eight 3-phase systems. Additionally, it supports analysis at different frequencies (DC, 50 Hz, variable frequency) and wiring configurations (1-phase, 3-phase). It can also measure mechanical values like torque, speed, noise, temperature, and vibration in complete synchronization.

Accurate frequency calculation

A single Dewesoft power analyzer and data acquisition system can measure multiple power modules simultaneously, each with an independent frequency. Supported line frequencies include:

16.7 Hz: Railway Sector
25 Hz: Public Grid
50 Hz: Public Grid
60 Hz: Public Grid
400 and 800 Hz: Aerospace
Variable Frequency: E.g., power inverters

Period values calculation

Our power analyzers also calculate period values of voltage and current, power components, power factor, and symmetrical components. Users can define cycle calculations and the overlap percentage.

Star-delta connection calculation

The system can calculate all values and waveforms for star connections from a delta connection and vice versa, displaying waveforms for U1, U2, U3 ↔ U12, U23, U31.

Efficiency and loss mapping of AC motors and inverters

Electric motor and inverter efficiency analysis aims to enhance motor performance by optimizing the efficiency of the electric input power relative to the mechanical output power. This process can involve using Clarke and Park transformations, which provide a better understanding of the relationship between the input line phase, the induced magnetic field, and the mechanical rotation angle.

All relevant settings for this type of analysis are now consolidated under the new Motor Analysis tab within the Power module. This tab includes:

Motor analysis setup options
Transformations and efficiency calculations
Integration with multiple new stand-alone math modules

The Motor Analysis module utilizes various math modules and widgets, such as:

Resolver sensor
2D/3D mapping
Contour plot widget

For more detailed information, refer to the following resources:

Easy power quality analysis

DewesoftX Harmonic FFT software feature enables the visualization of harmonics in:

voltage,
current,
active and reactive power,
line voltage,

all fully synchronized to the fundamental frequency.

Power quality standards

Our power analyzer supports a wide range of power quality standards, including:

Voltage and Current Flicker
THD, THC, TDD, TDC, TDR
Interharmonics, Full and Half-Sidebands
Rapid Voltage Changes (RVC)

These measurements and analyses ensure compliance with multiple industry standards, making it easier to maintain optimal power quality.

Power quality calculation (harmonics, THD, flicker)

Energy calculation

The Dewesoft Power module also automatically calculates the energy of the measured system. This feature enables the calculation of both positive and negative energy, providing a comprehensive understanding of the system's performance.

Additionally, the Math module allows users to calculate efficiency, essential for evaluating and optimizing system operations. This capability is particularly beneficial in various applications, such as:

Recuperation Brake Systems: Analyze the energy recovered during braking to improve system efficiency and performance.
Battery Testing: Measure energy input and output to assess battery efficiency, capacity, and overall health.

These features make Dewesoft Power Analyzers a versatile and powerful tool for energy calculation and efficiency analysis across different applications.

SOFTWARE

Award-Winning Data Acquisition Software Included for Free

Dewesoft data acquisition systems are bundled with award-winning DewesoftX data acquisition software. It is the world's most advanced and easy-to-use data recording and signal processing software. Software and hardware work together like magic. It offers simplicity as well as deep functionality to tackle any test and measurement task.

And the best part? You get lifetime FREE software updates and technical support. Software is evolving all the time. New major releases are released every 3 months constantly adding new features, optimizations, and other improvements. There are no hidden costs and will remain free forever.

Plug and Play

Connecting the DAQ system and sensors could not be faster or easier. DewesoftX software will automatically detect the connected DAQ systems and TEDS-equipped sensors will configure the channel configuration automatically. Features like:

Hardware auto-detection.
Smart sensors.
Sensor database.
Advanced TEDS sensor support.
Built-in unit conversion.
Real-time signal preview.
Wiring schematics.

will make you ready for measurement in seconds. Spend less time configuring your DAQ hardware and be more productive. Time is money!

Measure and Store

Powerful storing capabilities with more than 500 MB/s sustained stream rates mean you can always store data at full speed and never again worry about losing data that could compromise your tests. DewesoftX storing features offer:

Real-time data acquisition.
Synchronized acquisition of analog, counter, video, GPS, CAN bus, and many other sources.
Advanced triggering and alarms.
Single or multi-file storage.
Remote and distributed network storing.
Automated test sequences.

Even if you store gigabytes of data, our innovative data file format will ensure you can reload and analyze your data as fast as in a blink of an eye.

Analyse and Publish

NVH, structural testing, power analysis, and more. Forget about using several complex software solutions to record and analyze your data. DewesoftX offers one-stop shop for all test and measurement tasks. Our software offers:

Online and offline mathematics.
Flexible real-time visual displays.
Synchronized video support.
PDF and Word reporting tools.
Data export to many standard file formats.
Unlimited FREE license seats to view and analyze stored data.

DewesoftX is designed with the mindset of a test engineer and offers a complete testing solution in a single software package that is easy and joy to use.

Lifetime Free Updates

We are offering no-bluff or hidden cost licensing model for our data acquisition software. A new major version is released every three months bringing new features, performance boosts, bugfixes, with no additional cost to you. All updates for our existing users are free forever.

Unlimited License Seats

Our licensing model offers unlimited seats for analysing the recorded data. The recorded data file will bundle the license. Simply share data file with your colleagues and they can download software for free and ready to fully analyze the data. No additional licenses are needed.

Free Technical Support

We are putting our customers first. Free worldwide technical support is available for our DAQ software and hardware. Our technical support team is responsive and will attend to every support request and solve it in the fastest possible manner. Local technical support in our local offices is also available for you at no extra cost.