Case Studies(Page 4)

Case Studies

The article explores load angle measurement in synchronous machines using an incremental encoder and DewesoftX software. Students at HTL BULME conduct lab exercises to analyze rotor position and phase shifts. Using Dewesoft SIRIUS devices, they gain hands-on experience in synchronization and machine behavior. Future work will expand calculations with the Dewesoft Motor Analysis plugin.

Case Studies

Engineering Controls Srl analyzed the pulling strength of tie rods in Casa Desanti-Bossi, a historic neoclassical building in Novara, using Dewesoft technology. Over time, structural deterioration threatened its stability, prompting a detailed assessment through static and modal analysis. By measuring resonance frequencies, engineers evaluated stress levels and identified potential risks. Their findings support maintenance and reinforcement efforts, ensuring safety and preserving the building’s architectural heritage.

EB

Emanuele Burgognoni

Feb 27, 2025

Case Studies

The Superior Engineering Team from the University of Ljubljana used strain gauges and Dewesoft DAQ systems to measure wishbone deformations in their Formula Student race car. This analysis validated calculations, optimized weight, and improved steering dynamics. The findings will guide future designs, including the transition to carbon fiber wishbones, enhancing performance and reliability.

Case Studies

Cracow University of Technology and Dewesoft Poland assessed the dynamic performance of a steel-concrete pedestrian bridge using field tests and FE modeling. By analyzing natural frequencies, mode shapes, and damping ratios under pedestrian loads, they validated the bridge’s stability and refined numerical models, ensuring long-term safety and serviceability.

RM

Rok Mesar

Feb 10, 2025

Case Studies

The University of Naples' UniNa Corse Racing Team developed their first fully electric Formula SAE car in the 2023/2024 season, focusing on optimizing the suspension through tire-road force analysis. Collaborating with Dewesoft, they used advanced sensors and the TRICK tool to collect precise data. Their validated dynamic models achieved an 84–90% correlation with sensor measurements, enhancing the suspension's reliability and performance for the new electric vehicle.

Case Studies

E-Team Squadra Corse from the University of Pisa successfully converted their Formula SAE car, E-VA, to an electric powertrain in 2023. Partnering with Dewesoft, they used advanced sensors and extensive testing in Siena to optimize performance, resolve electrical issues, and validate their models, enhancing the car’s reliability and paving the way for future electric vehicle developments.

Case Studies

Engineering students at Politecnico of Turin developed a test bench to optimize the efficiency of their prototype vehicle's DC motor for the Shell Eco-Marathon. Using Dewesoft tools, they mapped the motor's performance by measuring electrical input and mechanical output, refining the vehicle's model to improve energy efficiency and address thermal issues for better competition results.

Case Studies

The article highlights how HyCentA uses Electrochemical Impedance Spectroscopy (EIS) with Dewesoft technology to optimize electrolysis stacks for green hydrogen production. Green hydrogen is presented as a key solution for decarbonizing industries and balancing renewable energy, with EIS enabling critical improvements in efficiency and stability to support global carbon neutrality goals.

Case Studies

The UNI Maribor Grand Prix Engineering team tested their race car’s aerodynamics using Dewesoft devices and CFD simulations to evaluate dynamic forces and improve performance. While the drag reduction system (DRS) showed minimal impact at lower speeds, higher-speed measurements revealed significant deviations from simulations, emphasizing the need for refined testing. The insights gained enhanced car settings and highlighted the importance of experimental validation in motorsport engineering.

Case Studies

The UNI Maribor Formula Student Team tested their electric race car, "Missy," using Dewesoft’s equipment to optimize performance for competition. They monitored acceleration, endurance, and aerodynamics with the SBOX, DEWE-43A, and DS-IMU1, capturing real-time data via GPS and CAN lines. The testing provided key insights into the car's electronics and driving dynamics, helping the team identify issues and improve the car’s performance for enhanced competitiveness.

Case Studies

LOGICDATA improved small electric motor testing with a flexible test bench design, using DewesoftX software for efficient motor analysis. Key features included automated motor mode detection, efficiency mapping, and thermography for fault detection. This setup reduced testing time, improved data accuracy, and optimized motor performance, ultimately streamlining LOGICDATA's development process.

MB

Marco Behmer

Nov 26, 2024

Case Studies

Vibro Technology conducted structural verification on the anti-surge valve for a Peruvian plant, using Dewesoft tools to analyze and mitigate vibrations. Their solution, combining shock absorbers and springs, optimized vibration control, improved structural support, and boosted operational reliability, enhancing the plant's safety and efficiency.

Case Studies

The Edvard Rusjan team from the University of Ljubljana uses Dewesoft measurement systems and a car-mounted test rig to gather data, refining simulations for optimized model aircraft designs in the Design, Build, Fly competition. Accurate measurements of thrust, lift, and power consumption help align simulations with real performance, enabling top competition results.

CF

Carsten Frederiksen

Nov 6, 2024

Case Studies

The article covers the testing and validation of a custom impact attenuator for the University of Padua’s Formula SAE race car. Using a drop tower test and Dewesoft instruments, the team validated their design against regulations. The results closely matched theoretical models, confirming the assembly’s effectiveness in absorbing energy and protecting the driver during frontal impacts while optimizing the design for safety and performance.

Case Studies

The article outlines a calibration process for railway seat comfort accelerometers using ISO 8041-1 and ISO 2631-1 standards to ensure accurate vibration measurements for passenger comfort. It details a cost-effective procedure using Dewesoft data acquisition involving sensor selection, support design, and sensitivity adjustments, enhancing comfort evaluations in railway vehicles.

Case Studies

Researchers enhanced hydrofoil performance by reducing vibrations through modal analysis and piezoelectric resonant shunt damping. By tuning natural frequencies using inductors and equipping the hydrofoil with piezoelectric patches to control bending and torsion, they significantly improved its dynamic behavior, offering valuable insights for marine and aeronautical engineering advancements.

Case Studies

The DIANA team from the Polytechnic University of Turin partnered with Dewesoft to conduct an Experimental Modal Analysis (EMA) on the airless wheels of their Martian rover, ARDITO. This analysis aimed to ensure the wheels' durability by studying their natural frequencies to prevent stress and vibrations. The findings help enhance the rover’s performance on challenging Martian terrain, supporting future planetary missions.

Case Studies

This article presents the experimental modal analysis (EMA) of a pedestrian platform to understand its dynamic behaviour under various loads. The study identified key dynamic properties using sensors, accelerometers, and Dewesoft systems, including natural frequencies, vibration modes, and damping ratios. The results are crucial for improving pedestrian structures' design, stability, and safety, showcasing the potential for applying EMA techniques to real-world scenarios.

Case Studies

Learn about dynamic characterization and structural monitoring of the Serra Cazzola viaduct, a significant highway structure in Italy, using Operational Modal Analysis (OMA). The project, led by Essebi in collaboration with Anas S.p.A., installed an extensive monitoring system comprising 85 triaxial accelerometers to assess the viaduct's structural integrity. Data collection revealed the viaduct’s low-frequency vibrations, which are essential for understanding its dynamic behaviour.

Case Studies

This case study examines the modal testing of an aircraft propeller blade using the Dewesoft KRYPTON system. The study identified the blade's resonance frequencies and vibration modes by capturing vibration data with accelerometers. Conducted in a controlled environment, the analysis emphasized the importance of accurate measurements in engineering, aligning with Kelvin's principle that improvement relies on the ability to measure.

Case Studies

This article details the validation of a sailing boat's finite element analysis (FEA) model using strain gauge measurements. The team optimized sustainable basalt fiber composites for boat components, balancing strength and weight. They designed and tested a critical crossbar using both experimental and numerical methods to ensure reliability, highlighting the integration of material testing, analysis, and real-world data to enhance boat performance and sustainability.

Case Studies

At Kungliga Tekniska Högskolan (KTH) in Sweden, a project with Strusoft and Dewesoft analyzed a two-span pedestrian bridge to enhance student learning. Using advanced monitoring tools like accelerometers, the project assessed the bridge's response to environmental and operational conditions, aiding in finite element model tuning and proactive maintenance. This initiative also supports the creation of an open-source bridge database for further research and education.

RM

Rok Mesar

May 8, 2024

Case Studies

The article describes a study on monitoring flow-induced vibrations (FIV) in nuclear pin bundles using Dewesoft's technology, highlighting its importance for reactor safety and performance. Strain gauges were used to measure vibrations from liquid lead flow in a prototype core, processed by DAQ systems to improve reactor design and stability through better vibration management.

Case Studies

The case study highlights the importance of updating monitoring and recording systems in DC-AC conversion power stations for enhanced power efficiency, safety, and stability. An outdated system at a 1960 380kV HVDC power station was replaced by LEANE with Dewesoft's advanced data acquisition technology. This upgrade improved reliability, reduced system intrusion with custom hardware, and integrated new software with the station's SCADA systems.