Case Studies
Case Studies
Vibration Measurement On a Truck GSO Hood
Dewesoft SIRIUS system was used for in-vehicle and MTS rig testing on potential solutions for field issues on the Hoods of some trucks.
Jake Rosenthal
11/1/2018
Case Studies
Brake Test Pressure Measurement on Buses
The brake system might be the most important and vulnerable system in the vehicle. Learn more about the brake system testing and analysis in this article.
Leslie Wang
10/9/2020
Case Studies
Machine Condition Monitoring on Chaban-Delmas Bridge
To increase the quality of predictive maintenance, our customer installed vibration sensors to monitor the kinematic chain and pulleys of the bridge.
Franck Beranger
9/29/2020
Case Studies
Biogas Engine Testing and Parameter Optimization
See how Power UP GmbH uses the Dewesoft combustion engine analyzer solution is used for biogas engine testing and parameter optimization.
Konrad Schweiger
6/29/2020
Case Studies
Performance Tuning in Tractor Pulling Sport
By collecting data over a time span of just 1 minute the high-speed data provides a lot of useful information to optimize the tractor engine.
Carsten Frederiksen
11/19/2018
Case Studies
Large Scale Aerospace Structural Testing for Indian Space Research Organization
Large Dewesoft 2264 channel signal conditioning and data acquisition system is used at the structural test facility in Indian Space Research Organization.
Carsten Frederiksen
9/24/2020
Case Studies
Structural Vibration Monitoring on the NASA's Crawler Transporter Core Systems
Learn how Dewesoft replaced old DAQs for vibration monitoring on NASA's Crawler Transporter core systems that require precise time synchronization.
Jake Rosenthal
9/25/2020
Case Studies
Train Brake Performance Testing in Winter Conditions
AFRY test center in Sweden has tested train brake performance in winter conditions, measuring strain and temperature with Dewesoft DAQ systems.
Carsten Frederiksen
11/1/2020
Case Studies
Structural Health Monitoring With MEMS Accelerometers
Learn how Dewesoft's new IOLITE MEMS accelerometer technology is used for a long term and permanent structural health monitoring of bridges and buildings.
Carsten Frederiksen
11/5/2020
Case Studies
Combustion Analysis and Car Performance Tuning of BMW M5 Hurricane
Measurement technology from Dewesoft helped tune the engine of the BMW M5 Hurricane sports sedan to reach over 1000 hp and set a world speed record.
Carsten Frederiksen
2/25/2021
Case Studies
Temperature Measurement on a Racing Car
Dewesoft temperature data loggers and OPTRIS infrared cameras are used to keep the state-of-the-art race car cool to ensure optimum performance and safety.
Loïc Siret
4/30/2021
Case Studies
Performance Testing and Measurement on Electric Boats
Dewesoft power analyzer & data acquisition system was used for performance testing and measurement of Alfastreet Marine electric boat. See the case study.
Bernard Jerman
1/22/2021
Case Studies
Vibration Test on High-Voltage Reactor
Learn how vibration measurement with a power analysis solution is used to identify the differences in the level of vibrations on a high-voltage reactor.
Gabriele Ribichini
7/17/2021
Case Studies
Formula Student Race Car Exhaust Noise Testing
See how the Dewesoft team performed exhaust noise testing and calculated vehicle RPMs based on the sound measurements at the Formula Student racing event.
Matjaž Strniša
10/2/2021
Case Studies
Car Seat Crash Test With a Catapult
Learn more about car seat crash tests with dummies. The results are used in the automotive & aerospace industry to evaluate seat behavior during an impact.
Nicolas Phan
10/26/2021
Case Studies
Hungry? Data Acquisition Cooks Up the Perfect BBQ
Find out how the Dewesoft data acquisition helped Traeger engineers to measure and collect data on high-tech grills in different temperature environments.
John Miller
6/13/2022
Case Studies
Structural Health Monitoring of the Railway Viaduct
A railroad bridge in Saudi Arabia was observed for around 80 hours to evaluate its structural health with the monitoring system based on Dewesoft integrated sensing devices.
Rok Mesar
3/19/2021
Case Studies
Direction Stability Test of a Braking Vehicle
In this article, you will find more about measuring the braking performance of the vehicle, using the Dewesoft X Brake test plugin and Polygon plugin.
Glacier Chen
10/26/2020
Case Studies
Airbag ECU Bracket Inertance Measurement
Learn how our data acquisition is used for airbag ECU bracket inertance measurement by detecting the acceleration signal of the airbag impact sensor.
Patrick Fu
10/9/2020
Case Studies
Electric Household Appliance Testing
Learn how BSH is utilizing our DAQ systems for voltage, current, and temperature measurements to test household appliances and perform power analysis.
Leslie Wang
8/1/2020
Case Studies
Correlating Power Measurements with Electromotor Vibration Data
Learn how the automation of the report generation process provided to be a huge time-saver after acquiring data with Dewesoft measurement equipment.
Grant Maloy Smith
5/30/2022
Case Studies
Vehicle Dynamics Testing Based on ISO Standards
Learn how LEANE and Dewesoft helped implement new solutions to improve daily vehicle testing job with the R2DB DAQ system and Vehicle Test Suite software.
Carsten Frederiksen
11/1/2020
Case Studies
High-voltage Testing of Railway Infrastructure
Learn how the Dewesoft DAQ system was used for railway maintenance and testing the safety of the electrical infrastructure power on the railway.
Konrad Schweiger
10/11/2022