Tech specs - CAN/CAN FD Interfaces

Technical drawings

DS-CAN2
 
DS-CAN2
SIRIUSim-4xCAN
SIRIUSi-8xCAN
SIRIUSif-8xCAN
SIRIUSiw-8xCAN

USB CAN Device Technical Specifications

DS-CAN2 SIRIUSim-4xCAN SIRIUSi-8xCAN SIRIUSif-8xCAN SIRIUSiw-8xCAN KRYPTONi-2xCAN USB
CAN ports specification
Number of ports 2 4 8 + 1 8 + 1 8 + 1 2
Interface type CAN 2.0B CAN 2.0B CAN 2.0B CAN 2.0B CAN 2.0B CAN 2.0B
Interface data rate up to 1 Mbit/sec up to 1 Mbit/sec up to 1 Mbit/sec up to 1 Mbit/sec up to 1 Mbit/sec up to 1 Mbit/sec
Special protocols OBDII, J1939, CAN out OBDII, J1939, CAN out OBDII, J1939, CAN out OBDII, J1939, CAN out OBDII, J1939, CAN out OBDII, J1939, CAN out
Sampling rate
> 10 kHz per channel
Software selectable
> 10 kHz per channel
Software selectable
> 10 kHz per channel
Software selectable
> 10 kHz per channel
Software selectable
> 10 kHz per channel
Software selectable
> 10 kHz per channel
Software selectable
Galvanic isolation
(Sensor supply not isolated)
Isolated Isolated Isolated Isolated Isolated Isolated
Bus pin fault protection ±36 V ±36 V ±36 V ±36 V ±36 V ±36 V
Power specification
Power supply 6 - 36 V DC
Startup voltage 7 V
Max voltage 5.00 V ±0.25 V
2x USB 2.0 powered
9 - 36 V DC 9 - 36 V DC 9 - 36 V DC
6 - 50 V DC
Startup voltage 7 V
Maximum sensor power consumption
3 W max total
(max 2 W on 15 V)
2.5 W max total 1 W per channel 1 W per channel
5 W max total
(max 3 W on 15 V)
Maximum power consumption 5.5 W
5 W
Combined device & sensor consumption
6.5 W (instrument) + 8 W (sensor)
6.5 W (instrument) + 8 W (sensor)
5.5 W
Environmental specification
Interface USB 2.0 USB 2.0 USB 2.0 USB 2.0 USB 2.0 USB 2.0
Connector type 9 pin D-SUB 9 pin D-SUB 9 pin D-SUB 9 pin D-SUB 9 pin D-SUB 9 pin D-SUB
Physical dimensions
105 x 90 x 30 mm
3.94 x 3.54 x 1.18 inch
145 x 139 x 64 mm
5.71 x 5.43 x 2.52 inch
266 x 139 x 64 mm
10.47 x 5.43 x 2.52 inch
266 x 139 x 64 mm
10.47 x 5.43 x 2.52 inch
282 x 135 x 70 mm
11.10 x 5.47 x 2.76 inch
213 x 54 x 56 mm (slice)
213 x 54 x 71 mm (with connectors)
Weight Weight 230 g
0.51 lbs
Weight 800 g
1.76 lbs
1320 g
2.90 lbs
1320 g
2.90 lbs
1930 g
4.25 lbs
1050 g
2.30 lbs
Operating temperature -20°C to +60°C -10°C to +50°C -10°C to +50°C -10 °C to +50 °C -40 °C to +60 °C -20 °C to +60 °C
Storage temperature -40°C to +70°C -40°C to +70°C -40°C to +70°C -40 °C to +70 °C -40 °C to +70 °C -40 °C to +70 °C
Humidity 95 % RH non condensing @ 60 °C 95 % RH non condensing @ 60 °C 95 % RH non condensing @ 60 °C
95 % RH non condensing @ 60 °C
IP protection IP50 IP65 / IP67 IP65 / IP67

EtherCAT CAN Device Technical Specifications

KRYPTONi-1xCAN KRYPTONi-1xCAN-FD
CAN ports specification
Number of ports 1 1
Interface type CAN 2.0B CAN-FD, CAN 2.0B
Interface data rate up to 1 Mbit/sec up to 8 Mbit/sec
Special protocols J1939 J1939
Galvanic isolation Isolated Isolated
Bus pin fault protection ±28 V
Power specification
Power supply 9 - 50 V DC 9 - 50 V DC
Maximum sensor power consumption
3 W max total 3 W max total
Maximum power consumption max. 2 W (no load)
Environmental specification
Interface
EtherCAT, 100 Mbit/s
Lemo 1T
(1 cable for data, power and sync, daisy chainable)
EtherCAT, 100 Mbit/s
Lemo 1T
(1 cable for data, power and sync, daisy chainable)
Connector type DSUB-9 DSUB-9
Physical dimensions 62 x 56 x 29 mm 62 x 56 x 29 mm
Weight 200 g
0.44 lbs
200 g
0.44 lbs
Operating temperature -40 °C to +85 °C -40 °C to +85 °C
Storage temperature -40 °C to +85 °C -40 °C to +85 °C
Humidity
IP protection IP65 / IP67 IP65 / IP67