Dewesoft blogg
Applikationsstudier
Learn DewesoftX Software Without DAQ Hardware: Simulate Signals, Channels & More
You can use DewesoftX software without DAQ hardware by simulating signals through four methods: built-in signal simulation, math-based waveform creation, using your PC’s sound card, or replaying recorded data files. These modes enable users to explore DewesoftX features, configure systems, and train without requiring any physical hardware, providing full access for learning, analysis, and data visualization.
Grant Maloy Smith
2025-06-12
Fallstudier
Brake and Wheel Slide Protection Testing for Trains at Velim Test Center
The VUZ Test Center in Velim, Czechia, conducts advanced testing of train brakes and wheel slide protection systems using Dewesoft data acquisition tools. With cutting-edge facilities and rigorous procedures, the center ensures rail components meet top safety and performance standards through both static and dynamic tests, simulating real-world conditions.
2025-06-11
Produktuppdateringar
X-line Updates: New Modules, Safer Power, and Smarter Connectivity
Our latest X-line updates introduce safer power connectors, dual CAN-FD support, and new high-precision strain gauge modules for SIRIUS X and IOLITE X. The new SIRIUS-X-16xLVe, featuring DSUB9 connectors and DSI adapter compatibility, enhances sensor flexibility, making the X-line even more powerful and versatile for industrial and research-grade data acquisition.
Iza Burnik
2025-06-04
Kunskapsbas för datainsamling
How NASA Tested the Space Shuttle: Ground Testing, Avionics, and Data Acquisition Explained
NASA’s Space Shuttle program relied on extensive ground testing to validate the Shuttle's engines, structures, and avionics. Using advanced sensors and data acquisition systems, NASA conducted hot-fire, vibration, wind tunnel, and flight simulations to ensure safety and performance. Key facilities, such as Stennis, Marshall, and SAIL, enabled rigorous validation, making data the cornerstone of the Shuttle’s engineering success.
Grant Maloy Smith
2025-06-04
Fallstudier
Monitoring Structural Vibrations from Quarry Blasts in a Family Home
A student project measured structural vibrations in a family home near a quarry using a Dewesoft IOLITEi-3xMEMS-ACC system. Over three weeks, data revealed short, intense spikes from quarry blasts, exceeding international safety limits for human exposure by more than 30 times. While traffic-induced vibrations were minimal, repeated exposure to blasts may pose a risk of structural damage and discomfort for residents, underscoring the need for ongoing vibration monitoring.
2025-05-28
Fallstudier
Testing High-Performance Engine Components with Dewesoft Combustion Analyzer
Pankl Racing Systems uses Dewesoft’s combustion analyzer and high-speed DAQ to test high-performance engine components under real and lab conditions. With detailed analysis of cylinder pressure, MFB points, and prechamber ignition, they optimize efficiency and durability. The setup also enables real-time knock detection and ECU tuning for motorsport and high-end automotive applications.
Konrad Schweiger
2025-05-27
Produktuppdateringar
S2-OMA and S2-SHM Now Offer Full Dewesoft (DXD) File Support
The latest versions of S2-OMA and S2-SHM software now fully support Dewesoft’s *.dxd file format, allowing users to directly import and analyze data without conversion. This seamless integration streamlines workflows for modal analysis and structural health monitoring by enabling advanced visualization, automated processing, and efficient reporting—all from raw Dewesoft data.
Rok Mesar
2025-05-26
Kunskapsbas för datainsamling
How the Concorde Was Developed and Tested: Inside the Supersonic Airliner Program
The Concorde, developed through a groundbreaking UK–France partnership, was a supersonic airliner that underwent one of the most extensive testing programs in aviation history. Over a decade, engineers and test pilots logged more than 5,000 flight hours, half at supersonic speeds, across global test sites. From extreme temperature trials to innovative engine and aerodynamic testing, Concorde’s development set new speed, safety, and international collaboration benchmarks.
Grant Maloy Smith
2025-05-09
Produktuppdateringar
OBSIDIAN Wins SAE Tech Briefs Product of the Year Award
Dewesoft’s OBSIDIAN was named 2024 Product of the Year by SAE Tech Briefs for its innovative, long-term data acquisition capabilities. Built on a rugged, low-power Linux platform, OBSIDIAN combines high-end signal conditioning, real-time data streaming, and remote control via mobile app, making it ideal for demanding industrial and mobile applications.
Grant Maloy Smith
2025-04-25
Kunskapsbas för datainsamling
How Easy is DewesoftX DAQ Software to Learn?
DewesoftX is a powerful yet intuitive data acquisition software used across various industries and applications. Despite offering advanced features like real-time visualization, multi-sensor support, and robust analysis tools, it’s remarkably easy to learn. Its graphical interface, seamless hardware integration, and flexible screen design let users quickly set up, record, analyze, and export data with minimal training.
Grant Maloy Smith
2025-03-27
Applikationsstudier
Optimizing Servo Control Systems with Dewesoft Hardware and Software
This application note showcases a proof-of-concept robotic arm system using Dewesoft’s IOLITE R8 hardware and DewesoftX software to simplify servo control. The setup combines real-time control, high-resolution output, and intuitive automation, demonstrating precise motion control, synchronized data acquisition, and easy integration with third-party systems.
Owen Maginity
2025-03-26
Applikationsstudier
Extending Grid Capacity: How Phase Balancing Delays Expensive Transformer Upgrades
This application note explains how phase load balancing can extend low-voltage grid capacity and delay costly transformer upgrades. By redistributing single-phase loads, utilities reduce peak loading, improve stability, and save costs. Analysis of over 1.500 transformers shows significant benefits, especially when using tools like Dewesoft Gridphase for accurate, network-aligned phase data and efficient field operations.
Urban Kuhar
2025-03-21
Applikationsstudier
Phase Identification in Power Distribution Grids Using Synchrophasors
The article highlights the importance of accurate phase identification in power distribution networks and introduces Dewesoft Gridphase, which uses synchrophasor technology to ensure consistent phase information across the grid. By compensating for transformer shifts and voltage angle deviations, Gridphase enables precise power-flow analysis, efficient maintenance, and improved grid stability in a simple and scalable way.
Urban Kuhar
2025-03-21
Produktuppdateringar
DewesoftX 2025.1 Release - XCP/CCP Calibration, C++ Script and OPC-UA Client Improvements
DewesoftX 2025.1 introduces XCP master module ECU writing, enhanced C++ scripting with VS Code debugging, improved OPC-UA client, and Live Status Calibration. Additional updates include vector channel reading, streamlined script reconfiguration, and usability improvements. This free upgrade is available in the download center.
Eva Kalšek
2025-03-19
Företagets nyheter
Dewesoft Partners with the 2025 Alpine Endurance Racing Team
Dewesoft partners with the Alpine Endurance Racing Team for the 2025 FIA WEC, providing advanced data acquisition for vehicle testing. Building on a strong 2024 season, Alpine fields two A424 Hypercars in an eight-race campaign, aiming for podiums with a reinforced lineup. Backed by experienced leadership and continuous development, the team targets success at iconic tracks like Le Mans, Spa, and Fuji.
Grant Maloy Smith
2025-03-05
Fallstudier
Calculating the Pulling Strength of Chains and Tie Rods in a Heritage Building
Engineering Controls Srl analyzed the pulling strength of tie rods in Casa Desanti-Bossi, a historic neoclassical building in Novara, using Dewesoft technology. Over time, structural deterioration threatened its stability, prompting a detailed assessment through static and modal analysis. By measuring resonance frequencies, engineers evaluated stress levels and identified potential risks. Their findings support maintenance and reinforcement efforts, ensuring safety and preserving the building’s architectural heritage.
Emanuele Burgognoni
2025-02-27
Fallstudier
Measuring Wishbone Deformations on an FSAE Car
The Superior Engineering Team from the University of Ljubljana used strain gauges and Dewesoft DAQ systems to measure wishbone deformations in their Formula Student race car. This analysis validated calculations, optimized weight, and improved steering dynamics. The findings will guide future designs, including the transition to carbon fiber wishbones, enhancing performance and reliability.
2025-02-26
Kunskapsbas för datainsamling
The History of Temperature Measurement
Temperature measurement has evolved from early relative indicators to precise, calibrated methods. Key developments include thermometers, thermocouples, RTDs, thermistors, and infrared sensors, enabling accurate readings across industries. Modern advancements, like thermal imaging and smart sensors, ensure reliable data collection, with Dewesoft DAQ systems providing high-quality signal conditioning for various temperature measurement applications.
Grant Maloy Smith
2025-02-26
Fallstudier
Validating the Dynamic Performance of a Single-Span Steel-Concrete Pedestrian Bridge
Cracow University of Technology and Dewesoft Poland assessed the dynamic performance of a steel-concrete pedestrian bridge using field tests and FE modeling. By analyzing natural frequencies, mode shapes, and damping ratios under pedestrian loads, they validated the bridge’s stability and refined numerical models, ensuring long-term safety and serviceability.
Rok Mesar
2025-02-10
Fallstudier
Optimizing Formula SAE Suspension Through Tire-Road Force Analysis
The University of Naples' UniNa Corse Racing Team developed their first fully electric Formula SAE car in the 2023/2024 season, focusing on optimizing the suspension through tire-road force analysis. Collaborating with Dewesoft, they used advanced sensors and the TRICK tool to collect precise data. Their validated dynamic models achieved an 84–90% correlation with sensor measurements, enhancing the suspension's reliability and performance for the new electric vehicle.
2025-01-30
Fallstudier
Testing Powertrain on an Electric Formula SAE Car
E-Team Squadra Corse from the University of Pisa successfully converted their Formula SAE car, E-VA, to an electric powertrain in 2023. Partnering with Dewesoft, they used advanced sensors and extensive testing in Siena to optimize performance, resolve electrical issues, and validate their models, enhancing the car’s reliability and paving the way for future electric vehicle developments.
2025-01-30
Kunskapsbas för datainsamling
What Makes Dewesoft the Best DAQ Solution?
Dewesoft leads the DAQ market with its intuitive DewesoftX software and high-quality, versatile hardware tailored for diverse industries. Offering advanced technologies, seamless integration, and scalable solutions, Dewesoft meets projects of any size with reliability and precision. Exceptional customer support and ongoing innovation further establish Dewesoft as the trusted choice for data acquisition worldwide.
Grant Maloy Smith
2025-01-14
Produktuppdateringar
Dewesoftx 2024.5 Released: Updates to Modal Testing and Sound Power Modules, and More
DewesoftX 2024.5 introduces key upgrades, including streamlined Modal Test workflows, enhanced Sound Power analysis, a new Order-Tracked Sound Power plugin, improved asynchronous data handling, and Excel export to separate sheets. The new CMP plugin expands compatibility with ASAM CMP and TECMP streams, ensuring smoother workflows and broader integration for all users.
Eva Kalšek
2024-12-03
Fallstudier
Testing and Validation of Small Electric Motors Using an Efficient Test Bench Design
LOGICDATA improved small electric motor testing with a flexible test bench design, using DewesoftX software for efficient motor analysis. Key features included automated motor mode detection, efficiency mapping, and thermography for fault detection. This setup reduced testing time, improved data accuracy, and optimized motor performance, ultimately streamlining LOGICDATA's development process.
Marco Behmer
2024-11-26