Tech specs - SIRIUS® XHS 

Technische Zeichnungen

SIRIUS XHS
 
SIRIUS XHS
SIRIUS XHS-PWR

SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing

SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing

Technische Einzelheiten

General specifications

Power
Power Supply 9 - 48 V DC
Power consumption Typ. 30 W
Environmental
Operating Temperature -10 to 50 °C
Storage Temperature -40 to 85 °C
Humidity 5 to 95 % RH non condensing @ 60 °C
IP rating IP20
Shock & Vibration
Shock (EN 60068-2-27:2009)
75 g, 6 ms, half-sine (25x pos./neg in each ahis)
Random Vibration (EN 60721-3-2: 1997 - Class 2M2)
Sweep sinus Vibration (EN 60068-2-6:2008)
Interfaces
Ethernet
1 GbE (XCP, OPC UA) incl. IEEE1588v2 synchronization (PTP) (RJ45)
USB USB 3.0 (Type C)
CAN CAN 2.0 (DSUB9)
Sync Input/Ouput
Level (Input/Output) TTL compatible
Max. Output Current ±24 mA (±50 mA for 1 sec)
Max. Sync-cable length 100 m (Master/Slave), 200 m (IRIG)

ADC Filter

ADC
Type Hybrid ADC
High bandwidth mode 16 bit SAR, up to 15 Ms/sec
Alias free mode 24 bit Sigma Delta, up to 2 Ms/sec
Digital low pass filter Software selectable (off, alias free)
Analog HW filter Analog 1 MHz 6th order (Butterworth)
Alias free filter 0.5*fs cutoff, 0.45*fs pass band, 0.55*fs stop band to -100dB, zero phase distortion, available below 2Ms/sec

Spezifikation der Verstärker

Overview

XHS-HV XHS-LV XHS-ACC
Connectors BANANA DB9, BNC BNC
Channels per slice 8
Data rate / channel 15 MS/s
Resolution 16-bit (24-bit @ 1 MS/s)
Bandwidth 5 MHz
Voltage ranges ±2000 V ... ±200 V ±100 V ... ±50 mV ±10 V ... ±200 mV
Input coupling DC DC, AC 1 Hz DC, AC 0.1 Hz, AC 1 Hz
Sensor excitation 2.5..30 V bipolar, 2..24 V unipolar, max. 0.2 A / 2 W IEPE 2 mA, 4 mA, 8 mA, 12 mA, 16 mA, 20 mA
Bridge connection Full
Programmable shunt
IEPE input DSI-ACC
Resistance
Temperature (PTx) DSI-RTD
Thermocouple DSI-TH
Potentiometer
LVDT DSI-LVDT
Charge DSI-CHG
Current ext. shunt
DSI20mA, DSI5A
ext. shunt
TEDS
Isolation voltage CATII 1000 V 1000 V 1000 V
Power consumption per channel 1 W/ch 1.2 W/ch TBD
Advanced functions High voltage, high bandwidth, high isolation High sensor excitation and multi range Sensor error detection, high speed
Rev: 1610438400

XHS-HV specifications

Inputs Voltage
ADC Type Hybrid ADC - 24-bit alias free up to 1 MS/s, 16-bit up to 15 MS/s
Sampling Rate Simultaneous 15 MS/s
Filtering AAF 1 MHz (6th order)
Analogue bandwidth (-3 dB)
5 MHz
Voltage ranges ±2000 V, ±1000 V, ±400 V, ±200 V
Input Accuracy Signal frequency Accuracy
DC to 1 kHz ±0.03 % of reading ±0.02 % of range
Up to 10 kHz ±0.1 % of reading ±0.05 % of range
Up to 100 kHz ±4 % of reading ±0.1 % of range
Up to 1000 kHz ±5 % of reading ±0.5 % of range
Noise floor, Typ.
Sample rate / Range →
2000 V 1000 V 400 V 200 V
15 MS/s -84 dB -82 dB -79 dB -75 dB
1 MS/s -95 dB -93 dB -85 dB -78 dB
100 kS/s -108 dB -106 dB -100 dB -95 dB
10 kS/s -117 dB -115 dB -109 dB -104 dB
CMR, Typ. 101 dB @ 50 Hz, 74 dB @ 400 Hz
Channel Crosstalk -116 dB typ. @ 50 Hz, -89 dB typ. @ 1 kHz
Gain Drift Typical 20 ppm/K, max. 40 ppm/K
Offset Drift Typical 1.5 mV/K + 1 ppm of range/K, max 3 mV/K + 2 ppm of range/K
Gain Linearity < 0.01 %
Input Coupling DC
Input Impedance 10 MΩ || 1 pF
Protection class CAT III 600 V; CAT II 1000 V
Additional Specifications
Input connector Banana
Rev: 1612519200

XHS-LV specification

Inputs Voltage
ADC Type Hybrid ADC - 24-bit alias free up to 1 MS/s, 16-bit up to 15 MS/s
Sampling Rate Simultaneous 15 MS/s
Filtering AAF 1 MHz (6th order)
Analog bandwidth (-3 dB) 5 MHz
Voltage ranges ±100, 50, 20, 10, 5, 2, 1, 0.5, 0.2, 0.1 and 0.05 V
Input Accuracy DC ±0.03 % of reading ±0.02 % of range ±100 μV (2 mV for Ranges ≥ 10 V)
Up to 1 kHz ±0.03 % of reading ±0.02 % of range
Up to 10 kHz ±0.1 % of reading ±0.05 % of range
Up to 100 kHz ±2 % of reading ±0.1 % of range
Up to 1000 kHz ±5 % of reading ±0.5 % of range
Noise floor, Typ.
Sample rate, filter \ Range →
100 V 5 V 0.5 V 0.05 V
15 MS/s, Filter off -82 dB -78 dB -65 dB -51 dB
1 MS/s, Filter on -94 dB -95 dB -88 dB -69 dB
100 kS/s, Filter on -104 dB -105 dB -100 dB -81 dB
10 kS/s, Filter on -113 dB -114 dB -107 dB -88 dB
CMR, Typ.
Frequency \ Range → 100 V 5 V 0.5 V 0.05 V
50 Hz 91 dB 102 dB 98 dB 100 dB
400 Hz 86 dB 75 dB 90 dB 98 dB
10 kHz 66 dB 74 dB 82 dB 83 dB
Channel Crosstalk Range ≥ 10 V: -105 dB @ 10 kHz
Range < 10 V: -120 dB @ 10 kHz
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Range ≥ 10 V: Typ. 100 μV/K + 1 ppm of range/K, Max 250 μV/K + 2 ppm of range/K
Range < 10 V: Typ. 4 μV/K + 1 ppm of range/K, Max 8 μV/K + 2 ppm of range/K
Gain Linearity < 0.03 %
Input Coupling (see 1) DC, AC 1 Hz (3 Hz, 10 Hz per SW)
Input Impedance Range < 10 V: 10 MΩ; Range ≥ 10 V: 1 MΩ || 110 pF between INx to GND
Excitation Voltage Unipolar or Bipolar Software selectable (programmable 16-bit DAC)
Excitation Level unipolar 2 .. 24 V; Predefined levels: 2, 2.5, 5, 10, 12, 15, 20 and 24 VDC
Excitation Level bipolar 2.5 .. 30 V; Predefined levels: 2.5, 5, 10, 12, 15, 24 and 30 VDC
Drift ±10 ppm/K ±150 μV/K
Stability 10% to 90% load (bipolar) < 0.01 %
Current limit 200 mA (2 Watt max. per Channel, 12 Watt max. per Slice)
Additional Specifications
Input connector DSUB 9, BNC (others on request)
TEDS support Standard + DSI® adapters
Rev: 1617026400
1) In- must be within ±10V referred to GND(iso); for Ranges ≥ 10 V the DC value of In- is not rejected

SIRIUS XHS Strom Shunt

General Specs

Power
Power Supply 9 - 36 V DC
PoE (RJ45)
PWR IN (Lemo 1B 2-pin)
Power consumption Typ. 30 W
Environmental
Operating Temperature
-40 to 70 °C
Storage Temperature
-40 to 85 °C
IP rating IP67
Shock & Vibration TBD
Intrerfaces
Ethernet
GbE (XCP, OPC UA) incl. IEEE1588v2 synchronization (PTP) (RJ45)
CAN CAN 2.0 (DSUB9)
Sync Input/Output
Level (Input/Output) TTL compatible
Max. Output Current ±24 mA (±50 mA for 1 sec)
Max. Sync-cable length
100 m (Master/Slave), 200 m (IRIG)
Additional Specifications
Interlock YES (chassis covers + cables)

DC-CT Current Transducer Specs

Inputs Current
ADC Type HybridADC - 24-bit alias free up to 1 MS/s, 16-bit up to 15 MS/s
Sampling Rate Simultaneous 15 MS/sec
Filtering AAF 1MHz (5th order)
Current Ranges 1000 A 500 A 100 A
Sensitivity 4 mV/A 8 mV/A 40 mV/A
Recommended cable size 95 mm2 50 mm2 25 mm2
Recommended PG cable gland M32 M25 M16
Recommended grounding cable size
50 mm2 25 mm2 16 mm2
Offset Accuracy ± 50 mA
Gain linearity < 0.01%
Flatnesss (DC-10kHz) ±50 mdB
Bandwidth (-3 dB) >500 kHz