Specifiche Tecniche - SIRIUS® XHS 

Disegni Tecnici

SIRIUS XHS
 
SIRIUS XHS
SIRIUS XHS-PWR

SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing

SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing

Specifiche Tecniche

General specifications

Power
Power Supply 9 - 36 V DC (Lemo 1B 2-pin) - PWR IN/PWR OUT
Power consumption Typ. 30 - 50 W
Environmental
Operating Temperature -10 to 50 °C
Storage Temperature -40 to 85 °C
Humidity 5 to 95 % RH non condensing @ 60 °C
IP rating IP20
Shock & Vibration TBD
Interfaces
Ethernet
GbE (XCP, OPC UA) incl. IEEE1588v2 synchronization (PTP) (RJ45)
USB USB 3.0 (Type C)
CAN CAN-FD, CAN 2.0 (DSUB9)
Sync Input/Ouput
Level (Input/Output) TTL compatible
Max. Output Current ±24 mA (±50 mA for 1 sec)
Max. Sync-cable length 100 m (Master/Slave), 200 m (IRIG)

ADC Filter

ADC
Type 16 bit SAR
Sampling Rate Simultaneous 15 MS/sec
Analog anti alias filter Bypass or analog 1 MHz 6th order (Butterworth)
Digital low pass filter Software selectable
Digital filter Characteristic Bypass, Butterworth or Bessel
Filter Order 2nd , 4th, 6th or 8th
Ratio Sample rate to Filter Freq. From 2 to 100
Topology Cascaded IIR Filter (up to 4 sections)

Specifiche Amplificatori

Overview

XHS-HV XHS-LV
Connectors BANANA DB9, BNC, BANANA
Counter version
Channels per slice 8
Data rate / channel
15 MS/sec
Resolution 16 bit (24 bit @ 1 MS/sec)
Bandwidth 5 MHz 5 MHz
Voltage ranges ±2000 V ... ±20 V ±100V ... ±50 mV
Input coupling DC DC, AC 1Hz (3, 10 Hz SW)
Sensor excitation 2..30 V bipolar, 0..24 V unipolar, max. 0.2A/2W
Bridge connection
Full
Programmable shunt
IEPE input DSI-ACC
Resistance
Temperature (PTx)
DSI-RTD
Thermocouple DSI-TH
Potentiometer
LVDT DSI-LVDT
Charge DSI-CHG
Current ext. shunt
DSI20mA, DSI5A
TEDS
Isolation voltage CATII 1000V 1000 V
Power consumption per channel 1W/ch 1.2W/ch
Advanced functions
High voltage, high bandwidth, high isolation High sensor excitation and multi range

XHS-HV specifications

Inputs Voltage
ADC Type HybridADC - 24 bit alias free up to 1 MS/sec, 16 bit up to 15 MS/sec
Sampling Rate Simultaneous 15 MS/sec
Filtering AAF 1MHz (6th order)
Analogue bandwidth 5 MHz
Voltage ranges ±2000 V, ±1000 V, ±400 V, ±200 V, ±100 V, ±40 V, ±20 V
Input Accuracy (see 1) Signal frequency Accuracy
DC
±0.03% of reading ±0.02% of range ±0.04V
Up to 1kHz ±0.03% of reading ±0.02% of range
Up to 10 kHz ±0.1% of reading ±0.05% of range
Up to 100 kHz ±2% of reading ±0.1% of range
Up to 1000 kHz ±5% of reading ±0.5% of range
Voltage range ±2000 V Filter OFF Filter ON
Typ. Noise floor @ 15 MS/sec / 1 MS/sec / 10kHz
81 dB / 92dB / 103 dB 87 dB / 97 dB / 108 dB
Typ. CMR @ 50 Hz/1 kHz/10 kHz TBD
Channel Crosstalk @ 50 Hz/1 kHz TBD
Gain Drift Typical 10 ppm/K, max. 40 ppm/K
Offset Drift Typical 1 mV/K + 1 ppm of range/K, max 2 mV/K + 5 ppm of range/K
Gain Linearity <0.01%
Input Coupling DC
Input Impedance 10 MΩ || 2pF
Protection class CAT III 600 V; CAT II 1000 V
Additional Specifications
Input connector Banana

XHS-LV specification

Inputs Voltage
ADC Type HybridADC - 24-bit alias free up to 1 MS/sec, 16-bit up to 15 MS/sec
Sampling Rate Simultaneous 15 MS/sec
Filtering AAF 1MHz (6th order)
Analogue bandwidth 5 MHz
Voltage ranges ±100, 50, 20, 10, 5, 2, 1, 0.5, 0.2, 0.1 and 0.05 Volt
Input Accuracy DC ±0.03 % of reading ±0.02 % of range ±100 μV (2 mV for Ranges ≥ 10 V)
Typical Noise Floor 100 V 5 V 0.5 V 0.05 V
Sample rate: 15 MS/sec -88 dB -88 dB -82 dB -67 dB
Sample rate: 1 MS/sec -100 dB -100 dB -91 dB -75 dB
Sample rate: 100 kS/sec -109 dB -110 dB -100 dB -84 dB
Sample rate: 10 kS/sec -118 dB -119 dB -105 dB -89 dB
Typ. CMR @ 50 Hz / 400 Hz / 10 kHz TBD
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity <0.01 %
Channel Cross talk Range TBD
Input Coupling (see 1) DC, AC 1 Hz (3 Hz, 10 Hz per SW)
Input Impedance Range < 10 V: 10 MΩ; Range ≥ 10 V: 1 MΩ || 110 pF between INx to GND
Excitation Voltage Unipolar or Bipolar Software selectable (programmable 16 bit DAC)
Excitation Level unipolar 1 .. 24 Volt; Predefined levels: 2, 2.5, 5, 10, 12, 15, 20 and 24 VDC
Exication Level bipolar 2.5 .. 30 Volt; Predefined levels: 2.5, 5, 10, 12, 15, 24 and 30 VDC
Drift TBD
Stability 10% to 90% load (bipolar) <0.01%
Current limit 200 mA (2 Watt max. per Channel, 12 Watt max. per Slice)
Additional Specifications
Input connector DSUB 9, BNC (others on request)
TEDS support Standard + DSI® adapters
1) In- must be within ±10V referred to GND(iso); for Ranges ≥ 10 V the DC value of In- is not rejected

SIRIUS XHS Shunt di Corrente

General Specs

Power
Power Supply
9 - 36 V DC
PoE (RJ45)
PWR IN (Lemo 1B 2-pin)
Power consumption Typ. 30 W
Environmental
Operating Temperature
-40 to 70 °C
Storage Temperature
-40 to 85 °C
IP rating IP67
Shock & Vibration TBD
Intrerfaces
Ethernet
GbE (XCP, OPC UA) incl. IEEE1588v2 synchronization (PTP) (RJ45)
CAN CAN-FD, CAN 2.0 (DSUB9)
Sync Input/Output
Level (Input/Output) TTL compatible
Max. Output Current ±24 mA (±50 mA for 1 sec)
Max. Sync-cable length
100 m (Master/Slave), 200 m (IRIG)
Additional Specifications
Interlock YES (chassis covers + cables)

DC-CT Current Transducer Specs

Inputs Current
ADC Type HybridADC - 24 bit alias free up to 1 MS/sec, 16 bit up to 15 MS/sec
Sampling Rate Simultaneous 15 MS/sec
Filtering AAF 1MHz (5th order)
Current Ranges 1000 A 500 A 100 A
Sensitivity 4 mV/A 8 mV/A 40 mV/A
Recommended cable size 95 mm2 50 mm2 25 mm2
Recommended PG cable gland M32 M25 M16
Recommended grounding cable size
50 mm2 25 mm2 16 mm2
Offset Accuracy ± 50 mA
Gain linearity < 0.01%
Flatnesss (DC-10kHz) ±50 mdB
Bandwidth (-3 dB) >500 kHz