Specifiche tecniche dei dispositivi CAN

Specifiche tecniche delle interfacce USB CAN bus

	DS-CAN2	SIRIUSim-4xCAN	SIRIUSi-8xCAN	SIRIUSif-8xCAN	SIRIUSiw-8xCAN	KRYPTONi-2xCAN USB
CAN ports specification
Number of ports	2	4	8 + 1	8 + 1	8 + 1	2
Interface type	CAN 2.0B	CAN 2.0B	CAN 2.0B	CAN 2.0B	CAN 2.0B	CAN 2.0B
Interface data rate	up to 1 Mbit/sec	up to 1 Mbit/sec	up to 1 Mbit/sec	up to 1 Mbit/sec	up to 1 Mbit/sec	up to 1 Mbit/sec
Special protocols	OBDII, J1939, CAN out	OBDII, J1939, CAN out	OBDII, J1939, CAN out	OBDII, J1939, CAN out	OBDII, J1939, CAN out	OBDII, J1939, CAN out
Galvanic isolation (Sensor supply not isolated)	Isolated	Isolated	Isolated	Isolated	Isolated	Isolated
Bus pin fault protection	±36 V	±36 V	±36 V	±36 V	±36 V	±36 V
Power specification
Power supply	6 - 36 V DC Startup voltage 7 V	Max voltage 5.00 V ±0.25 V 2x USB 2.0 powered	9 - 36 V DC	9 - 36 V DC	9 - 36 V DC	6 - 50 V DC Startup voltage 7 V
Maximum sensor power consumption	3 W max total (max 2 W on 15 V)	2.5 W max total	1 W per channel	1 W per channel		5 W max total (max 3 W on 15 V)
Maximum power consumption	5.5 W	5 W Combined device & sensor consumption	6.5 W (instrument) + 8 W (sensor)	6.5 W (instrument) + 8 W (sensor)		5.5 W
Environmental specification
Interface	USB 2.0	USB 2.0	USB 2.0	USB 2.0	USB 2.0	EtherCAT
Connector type	9 pin D-SUB	9 pin D-SUB	9 pin D-SUB	9 pin D-SUB	9 pin D-SUB	9 pin D-SUB
Physical dimensions	105 x 90 x 30 mm 3.94 x 3.54 x 1.18 inch	145 x 139 x 64 mm 5.71 x 5.43 x 2.52 inch	266 x 139 x 64 mm 10.47 x 5.43 x 2.52 inch	266 x 139 x 64 mm 10.47 x 5.43 x 2.52 inch	282 x 135 x 70 mm 11.10 x 5.47 x 2.76 inch	213 x 54 x 56 mm (slice) 213 x 54 x 71 mm (with connectors)
Weight	Weight 230 g 0.51 lbs	Weight 800 g 1.76 lbs	1320 g 2.90 lbs	1320 g 2.90 lbs	1930 g 4.25 lbs	575 g 1.27 lbs
Operating temperature	-20°C to +60°C	-10°C to +50°C	-10°C to +50°C	-10 °C to +50 °C	-40 °C to +60 °C	-20 °C to +60 °C
Storage temperature	-40°C to +70°C	-40°C to +70°C	-40°C to +70°C	-40 °C to +70 °C	-40 °C to +70 °C	-40 °C to +70 °C
Humidity	5 to 95 % RH non-condensing at 50 °C	5 to 95 % RH non-condensing at 50 °C	5 to 95 % RH non-condensing at 50 °C	5 to 95 % RH non-condensing at 50 °C	-	5 to 95 % RH non-condensing at 50 °C
IP protection	IP50	IP50	IP20	IP50	IP65 / IP67	IP50
Rev: 1620302400

Specifiche tecniche delle interfacce bus EtherCAT® CAN

	KRYPTONi-1xCAN	KRYPTONi-1xCAN-FD	IOLITEi-4xCAN-FD
CAN ports specification
Number of ports	1	1	4
Interface type	CAN 2.0B	CAN-FD, CAN 2.0B	CAN-FD, CAN 2.0B
Interface data rate	up to 1 Mbit/sec	up to 5 Mbit/sec	Up to 1 Mbit/s (CAN2.0B) Up to 5 Mbit/s (CAN-FD)
Special protocols	J1939 (see 1)	J1939 (see 1)	J1939, OBDII, XCP
Galvanic isolation	Isolated	Isolated	Isolated
Bus pin fault protection		±28 V	±36 V
Power specification
Power supply	9 - 50 V DC	9 - 50 V DC	9 - 48 V DC
Maximum sensor power consumption	5 V / max. 250 mA (1.25 W) 12 V / max. 90 mA (1.1 W)	5 V / max. 250 mA (1.25 W) 12 V / max. 90 mA (1.1 W)	5 V / max. 250 mA (1.25 W) 12 V / max. 90 mA (1.1 W)
Maximum power consumption		max. 2 W (no load)	max. 2 W (no load)
Environmental specification
Interface	EtherCAT, 100 Mbit/s Lemo 1T (1 cable for data, power and sync, daisy chainable)	EtherCAT, 100 Mbit/s Lemo 1T (1 cable for data, power and sync, daisy chainable)	EtherCAT, 100 Mbit/s
Connector type	DSUB-9	DSUB-9	9 pin D-SUB
Physical dimensions	62 x 56 x 29 mm	62 x 56 x 29 mm	128.4 x 118.4 x 30.14 mm
Weight	200 g 0.44 lbs	200 g 0.44 lbs	200 g 0.44 lbs
Operating temperature	-40 °C to +85 °C	-40 °C to +85 °C	-10 °C to +50 °C
Storage temperature	-40 °C to +85 °C	-40 °C to +85 °C	-40 °C to +85 °C
Humidity	-	-	-
IP protection	IP65 / IP67	IP65 / IP67	-
1) Transmit mode not supported yet. OBDII and XCP plugins not supported yet.
Rev.: 1671516000

Torna all'inizio