Specifiche tecniche - Adattatori DSI
Specifiche tecniche
General specifications
Connectors | |
DAQ interface connector | DB9 Male |
Sensor connector | See individual adapter specification |
Environmental | |
Operating Temperature | -10 to 60 °C |
Storage Temperature | -40 to 85 °C |
Humidity | 5 to 95 % RH non-condensing at 50 °C |
IP rating | IP50 |
RFI susceptibility | ±0.5 % span error at 400 MHz, 5 W, 3 m |
Shock & Vibration | Vibration sweep sinus (EN 60068-2-6:2008) Vibration random (EN 60721-3-2: 1997 - Class 2M2) Shock (EN 60068-2-27:2009) MIL-STD-810D |
Rev: 1602676800 |
DSI-THx
DSI-THx
DSI-ACC
DSI-CHG
DSI-CHG-DC
DSI-V-200
DSI-RTD
DSI-20mA
DSI-5A
DSIi-10A
DSIi-20A
DSI-LVDT
DS-16xLVDTr
General specifications
General specifications | |
Sensor connector | Mini thermocouple, female |
Thermocouple Types | DSI-TH-K: Type K DSI-TH-J: Type J DSI-TH-T: Type T DSI-TH-C: Type C |
Cold junction compensation | Integrated |
CJC accuracy | 1.0 °C |
Input impedance | > 10 MΩ |
BIAS current | 50 nA |
Open TC detection | |
Linearisation | Through software according to the sensor type |
TEDS | For adapter identification and calibration data |
Host amplifier accuracy
Measurement hardware | SIRIUSx-MULTI SIRIUSx-STGM MINITAURs |
SIRIUSx-STG SIRIUSx-STGMv2 SIRIUSx-HD-STGS |
SIRIUSx-HS-STG | SIRIUSx-HD-LV | DEWE-43A |
Bandwidth | 70 kHz | 70 kHz | 70 kHz | 70 kHz | 70 kHz |
Typical peak to peak noise (Type K) | |||||
30 kHz bandwidth | 0.44 °C | 0.44 °C | 0.5 °C | 0.44 °C | 0.44 °C |
100 Hz bandwidth | 0.22 °C | 0.22 °C | 0.25 °C | 0.22 °C | 0.22 °C |
1 Hz bandwidth | 0.02 °C | 0.02 °C | 0.02 °C | 0.02 °C | 0.02 °C |
Accuracy
DSI-TH-K for thermocouple type K (DIN EN 60584-1) | ||||||
Input Range | Actual reading | Typical accuracy [maximum accuracy] | ||||
-200 to 1370 °C | -200 to -100 °C | ±7.0 [±12.0] °C | ±4.6 [± 9.0] °C | ±4.6 [± 9.0] °C | ±4.6 [± 9.0] °C | ±4.6 [± 9.0] °C |
-100 to 0 °C | ±2.6 [± 6.6] °C | ±2.4 [± 4.6] °C | ±2.4 [± 4.6] °C | ±2.4 [± 4.6] °C | ±2.4 [± 4.6] °C | |
0 to 500 °C | ±2.0 [± 5.5] °C | ±1.8 [± 3.5] °C | ±1.8 [± 3.5] °C | ±1.9 [± 3.5] °C | ±1.9 [± 3.5] °C | |
500 to 1000 °C | ±2.1 [± 6.1] °C | ±2.1 [± 4.1] °C | ±2.1 [± 4.1] °C | ±2.5 [± 4.1] °C | ±2.5 [± 4.1] °C | |
1000 to 1370 °C | ±3.0 [± 7.0] °C | ±2.5 [± 5.0] °C | ±2.5 [± 5.0] °C | ±3.0 [± 5.0] °C | ±3.0 [± 5.0] °C | |
DSI-TH-J for thermocouple type J (DIN EN 60584-1) | ||||||
Input Range | Actual reading | Typical accuracy [maximum accuracy] | ||||
-200 to 1000 °C | -200 to -100 °C | ±4.0 [± 9.0] °C | ±4.0 [± 7.0] °C | ±4.0 [± 7.0] °C | ±4.0 [± 7.0] °C | ±4.0 [± 7.0] °C |
-100 to 0 °C | ±2.0 [± 5.7] °C | ±1.7 [± 3.7] °C | ±1.7 [± 3.7] °C | ±2.0 [± 3.7] °C | ±2.0 [± 3.7] °C | |
0 to 300 °C | ±1.6 [± 5.0] °C | ±1.6 [± 3.0] °C | ±1.6 [± 3.0] °C | ±1.6 [± 3.0] °C | ±1.6 [± 3.0] °C | |
300 to 1000 °C | ±2.0 [± 5.2] °C | ±1.8 [± 3.2] °C | ±1.8 [± 3.2] °C | ±2.0 [± 3.2] °C | ±2.0 [± 3.2] °C | |
DSI-TH-T for thermocouple type T (DIN EN 60584-1) | ||||||
Input Range | Actual reading | Typical accuracy [maximum accuracy] | ||||
-270 to 400 °C | -250 to -100 °C | ±7.0 [±25.0] °C | ±7.0 [±19.0] °C | ±7.0 [±19.0] °C | ±7.0 [±19.0] °C |
±7.0 [±19.0] °C |
-100 to 0 °C | ±1.8 [± 7.0] °C | ±1.8 [± 5.0] °C | ±1.8 [± 5.0] °C | ±1.8 [± 5.0] °C | ±1.8 [± 5.0] °C | |
0 to 100 °C | ±1.3 [± 5.6] °C | ±1.3 [± 3.6] °C | ±1.3 [± 3.6] °C | ±1.3 [± 3.6] °C | ±1.3 [± 3.6] °C | |
100 to 400 °C | ±1.0 [± 5.0] °C | ±1.0 [± 3.0] °C | ±1.0 [± 3.0] °C | ±1.0 [± 3.0] °C | ±1.0 [± 3.0] °C | |
DSI-TH-C for thermocouple type C (ASTM E988-96) | ||||||
Input Range | Actual reading | Typical accuracy [maximum accuracy] | ||||
0 to 2300 °C | 0 to 1000 °C | ±3.0 [±12.0] °C | ±3.0 [± 8.0] °C | ±3.0 [± 8.0] °C | ±3.0 [± 8.0] °C | ±3.0 [± 8.0] °C |
1000 to 1600 °C | ±4.0 [±11.6] °C | ±4.0 [± 8.6] °C | ±4.0 [± 8.6] °C | ±4.0 [± 8.6] °C | ±4.0 [± 8.6] °C | |
1600 to 2300 °C | ±6.7 [±19.0] °C | ±6.7 [±14.0] °C | ±6.7 [±14.0] °C | ±6.7 [±14.0] °C |
±6.7 [±14.0] °C |
General specifications
Inputs specifications | |||
Sensor connector | BNC | ||
Supported sensors | IEPE / ICP | ||
Amplifier settings | Automatically selected by software - Measurement: Voltage - Range: ±0.1 V to ±10 V - Excitation: 10 V |
||
DSI-ACC | DSI-ACC-0.16Hz | DSI-ACC-20mA | |
Sensor excitation | 4 mA ±10 % | 4 mA ±10 % | 20 mA ±15 % |
Compliance voltage | > 22 Volt | > 22 Volt | > 20 Volt |
Accuracy 30 Hz to 30 kHz | 0.3 % | 0.07 % | 0.3 % |
High pass filter | 0.8 Hz | 0.16 Hz | 0.8 Hz |
Power consumption | 300 mW | 300 mW | 800 mW |
Gain drift | 50 ppm/°C | ||
Max. input offset | 12 mV | ||
Input impedance | 1 MΩ | ||
Supply voltage | ±5 V (±1 %) | ||
Input configuration | Isolated (max. 350 VDC) when using with isolated SIRIUSi modules, else single ended | ||
Bandwidth | up to 500 kHz (limited by bandwidth of host amplifier) | ||
Low-pass filter | 10 Hz to 100 kHz (depending on host amplifier) | ||
Ranges | 100 mV, 1000 mV, 10000 mV (SIRIUS-HS series offers more ranges) | ||
Typical SNR @ 30 kHz bandwidth | |||
10,000 mV | up to 125 dB (limited by the SNR of the host amplifier) | ||
1,000 mV | up to 110 dB (limited by the SNR of the host amplifier) |
General specifications
Inputs specifications | |
Sensor connector | BNC |
Supported sensors | Charge sensors |
Accuracy | 0.5 % |
Gain drift | 100 ppm/°C |
Supply voltage | ±5 V (±1 %) |
Power consumption | max. 100 mW |
Input configuration | Isolated (max. 350 VDC) when using with isolated SIRIUSi modules, else single-ended |
Bandwidth | 0.07 Hz up to 300 kHz (limited by bandwidth of host amplifier) |
Low-pass filter | 10 Hz to 100 kHz (depending on host amplifier) |
Range | 1,000 / 10,000 / 50,000 pC (SIRIUS-HS series offers more ranges) |
Typ. SNR @ 30 kHz bandwidth |
up to 125 dB (limited by the SNR of the host amplifier) |
Max. offset | 20 pC (compensated in DEWESoft® by software filter) |
High-pass filter | 0.07 Hz, 1 Hz, 10 Hz |
Amplifier settings | Automatically selected by software - Measurement: Voltage - Range: ±0.1 to ±10 V - Excitation: 10 V |
General specifications
Inputs specifications | |
Sensor connector | BNC |
Supported sensors | Charge sensors |
Supply voltage | 12 V to 15 V (±1 %) |
Power consumption | Max. 0.8 W |
Input configuration | Isolated (max. 350 VDC) when using with isolated SIRIUSi modules, else single-ended |
Bandwidth | 20 kHz (500 kpC range) to 200 kHz (50 kpC) Bandwidth may be limited on amplifiers with < 500 mW Exc. power supply |
Range | 500 kpC 50 kpC 10 kpC 1 kpC |
High-pass filter | 500 kpC range: - DC (filter off) - 0.14 mHz (time constant > 1000 s) - 1.4 mHz (time constant > 100 s) - 14 mHz (time constant > 10 s) - 0.14 Hz (time constant > 1 s) 50 kpC / 10 kpC / 1 kpC range: - DC (filter off) - 1.4 mHz (time constant > 100 s) - 14 mHz (time constant > 10 s) - 0.14 Hz (time constant > 1 s) - 1.4 Hz (time constant > 0.1 s) |
DC drift | < 1 pC/s @ 50 kpC, 500 kpC, (see 1.) |
Supported Amplifiers | SIRIUS LV/LV+, MULTI, STGM/STGM+, STG/STG+, HD-LV, HD-STGS, HS-LV/HS-LV+, HS-STG/HS-STG+ KRYPTON-6xSTG IOLITE-6xSTG *Other amplifiers support pending |
Amplifier settings | Automatically selected by software: - Measurement: Voltage - Range: ±0.1 V to ±10 V - Excitation: 12 V / 15 V |
1.) Specifications update pending |
General specifications
Inputs specifications | |
Sensor connector | BNC |
Ranges | ±200 V, ±50 V, ±5 V, ±0.5 V (SIRIUS-HS series offers more ranges) |
DC Accuracy | ±0.06 % of reading ±0.02 % of range ±5 mV |
Bandwidth (-3 dB) | 300 kHz (limited by bandwidth of host amplifier) |
Low-pass filter | 10 Hz to 100 kHz (depending on host amplifier) |
Common mode voltage range | ±200 V |
Input overvoltage protection | ±250 V |
Input impedance In+ | 1 MΩ |
Input impedance In- | 1 MΩ |
Gain drift | Typical 15 ppm/K (max. 30 ppm/K) |
Input offset drift | Typical 10 μV/K (max. 25 μV/K) |
Input attenuation | 50 ±0.5 % (uncalibrated) |
Input configuration | Isolated (max. 350 VDC) when using with isolated SIRIUSi modules, else differential |
Typical SNR @ 30 kHz BW | 98 dB @ 200 V range 98 dB @ 40 V range 79 dB @ 4 V range |
Host: Isolated amplifier | 160 dB DC, 110 dB @ 1 kHz |
Host: Differential amplifier | 100 dB @ 100 Hz, 60 dB @ 10 kHz |
Amplifier settings | Automatically selected by software - Measurement: Voltage - Range: ±0.1 V to ±10 V - Excitation: 10 V |
General specifications
Inputs specifications | |
Sensor connector | 5-pin BINDER connector series 712 |
Supported sensors | Resistance: Pt100, Pt200, Pt500, Pt1000, Pt2000 |
Temperature range | -200 °C to 850 °C |
Input offset | 50 μV |
Constant current | 1.25 mA |
Constant current accuracy | ±0.02 % from calibrated value |
Constant current drift | 22 ppm/ °C |
Linearisation | Through software according to sensor type |
Connection types | 2-, 3- or 4-wire |
Bandwidth (-3 dB) | 10 kHz (limited by bandwidth of host amplifier) |
Input configuration | Isolated (max. 350 VDC) when using with isolated SIRIUSi modules, else differential |
Typ. noise: 100 Hz bandwidth | 0.03 °C |
Input configuration | Isolated (max. 350 VDC) when using with isolated SIRIUSi modules, else differential |
Amplifier settings | Automatically selected by software - Measurement: Voltage - Range: ±0.1 V to ±10 V - Excitation: 10 V |
Accuracy
Host amplifier | SIRIUSx LVv2 / STGv2 / HS-LV / HS-STG DEWE-43A MINITAURs |
SIRIUSx STGMv2 / HD-LV / HD-STG KRYPTON STG |
SIRIUSx Multi / STGM | ||
Resistance Range | 80 Ω | ±0.05 % of reading ±120 mΩ | ±0.05 % of reading ±120 mΩ | ±0.05 % of reading ±200 mΩ |
|
800 Ω | ±0.05 % of reading ±200 mΩ | ±0.05 % of reading ±200 mΩ | ±0.05 % of reading ±840 mΩ |
||
6 kΩ | ±0.05 % of reading ±840 mΩ | ±0.05 % of reading ±1500 mΩ |
±0.05 % of reading ±8 Ω | ||
DIN | Sensor | Range | Temperature | ||
EN 60751 | Pt100 | -200 to 850°C | ±0.1 % of reading ±0.69 °C | ±0.1 % of reading ±0.69 °C | ±0.1 % of reading ±2.5 °C |
EN 60751 | Pt200 | -200 to 850°C | ±0.1 % of reading ±0.44 °C | ±0.1 % of reading ±0.44 °C | ±0.1 % of reading ±1.2 °C |
EN 60751 | Pt500 | -200 to 850°C | ±0.1 % of reading ±0.61 °C | ±0.1 % of reading ±1 °C | ±0.1 % of reading ±4 °C |
-200 to 150°C | ±0.1 % of reading ±0.28 °C | ±0.1 % of reading ±0.28 °C | ±0.1 % of reading ±1.2 °C |
||
EN 60751 | Pt1000 | -200 to 850°C | ±0.1 % of reading ±0.39 °C | ±0.1 % of reading ±0.8 °C | ±0.1 % of reading ±3 °C |
EN 60751 | Pt2000 | -200 to 550°C | ±0.1 % of reading ±0.29 °C | ±0.1 % of reading ±0.5 °C | ±0.1 % of reading ±1.5 °C |
General specifications
Inputs specifications | |
Input connector type | SMD terminal block with push-buttons |
Connector info | Direct wire: 0.2 … 0.75 mm² / 24 … 18 AWG |
Input range | 20 mA |
Shunt Resistor | 50 Ω, Metal Foil |
Resistor Tolerance | ±0.01 % |
Temperature Coefficient | ±0.05 ppm/°C typical (0 °C to +60 °C) ±0.2 ppm/°C typical (-55 °C to +125 °C) |
Power Rating | 250 mW (do NOT exceed maximum rating!) |
TEDS | 1024-bit, 1-Wire EEPROM |
General specifications
Inputs specifications | |
Input connector type | MSTB 2,5/ 3-STF-5,08 Phoenix Contact, mates with MSTB 2,5/ 3-GF-5,08 |
Connector info | 2.5 mm² Nominal cross section |
Nominal current | 5 A (DC or AC RMS continuous) |
Pulse load | 25.00 A @ 5.0 sec, 120 sec interval, continuous |
Shunt Resistor | 10 mΩ |
Resistor Tolerance | Calibrated to ±0.1 %, calibration in TEDS |
Temperature Coefficient | < ±30 ppm/°C typical (+20 °C to +60 °C) |
Voltage rating | 300 V DC or AC RMS |
TEDS | 1024-bit, 1-Wire EEPROM |
Rev: 1584811800 |
General specifications
Inputs specifications | |
Input connector type | 4mm Banana |
Current Range | 10 A DC or ACpeak |
Accuracy | 0.5 % of reading |
Phase Error | < 0.1° (50 Hz) |
Bandwidth | 1 kHz (0.05 dB, 0.1°) 10 kHz (0.1 dB, 1.5°) 100 kHz (0.2 dB, 6°) |
TEDS | Fully Supported |
Overload Capability | 100 A nominal current for < 1 sec |
Zero Offset | 20 mA |
Temperature Coefficient | 40 ppm/K |
Environmental specifications | |
Dimensions | 65 x 44 x 24 mm |
Power Supply | 5 V |
Current Consumption | max. 30 mA |
Operating Temperature | -40 °C to +55 °C |
Isolation | 4 kVp |
Safety | 600 V CAT III |
General specifications
Inputs specifications | |
Input connector type | 4mm Banana |
Current Range | 20 A DC or ACpeak |
Accuracy | 0.5 % of reading |
Phase Error | < 0.1° (50 Hz) |
Bandwidth | 1 kHz (0.05 dB, 0.1°) 10 kHz (0.1 dB, 1.5°) 100 kHz (0.2 dB, 6°) |
TEDS | Fully Supported |
Overload Capability | 100 A nominal current for < 1 sec |
Zero Offset | 20 mA |
Temperature Coefficient | 40 ppm/K |
Environmental specifications | |
Dimensions | 65 x 44 x 24 mm |
Power Supply | 5 V |
Current Consumption | max. 30 mA |
Operating Temperature | -40 °C to +55 °C |
Isolation | 4 kVp |
Safety | 600 V CAT III |
General specifications
General specifications | |
Sensor connector | DB9 Female |
Power supply Exc. Voltage | 10 V – 15 V, from EXC+ to EXC- outputs |
Power supply Exc. Current | 44 mA, from EXC+ to EXC- outputs (see 1) |
Output voltage | 1.00 V = 500 mV/V (see 2) |
Output bandwidth | 1 kHz |
Gain error | 1 % of Full Scale |
Output TCR | 55 ppm/K of Full Scale |
Sensor VTR = S x d, Sensitivity |
2000 mV/V maximum |
Sensor supported type | Differential LVDR or RVDT, Inductive Half-Bridge LVDT |
Sensor Exc. voltage | 2.88 Vrms (differential) (see 3) |
Sensor Exc. frequency | Selectable 4.02 kHz / 9.60 kHz typical; 2.5% error |
Phase compensation | -50 °C to +85 °C at 4 kHz; -75 °C to +70 °C at 10 kHz |
TEDS | 1024-bit, 1-Wire EEPROM (see 4) |
1) Absolute maximum rating, specified for SIRIUSi. | |
2) For sensor VTR (Voltage Transfer Ratio) = 1000 mV/V. | |
3) Sinusoidal, 50 dB THD typical, not possible to sync from adapter to adapter. | |
4) Only one device per TEDS line is supported. Can be set to internal (adapter) or external (sensor). |
General specifications
General specifications | |
Sensor connector | DB9 Female |
Power supply Exc. Voltage | 10 V – 15 V, from EXC+ to EXC- outputs (SIRIUS STGv2 = 15 V supply) |
Power consumption per channel | 320 mW (15 V supply, no load) 800 mW (15 V supply, 100 R load on 3 Vrms) |
Output voltage max. | 500 mV for 1000 mV/V HB LVDT |
Output bandwidth | 1 kHz (-6 dB, 90° phase) |
Gain error | 1 % of Full Scale |
Output TCR | 55 ppm/K of Full Scale |
Sensor supported type | Full Bridge / Half-Bridge LVDT impedance min. 120 R. |
SYNC Input Voltage | 500 mVrms typical recommended 1700 mVrms max recommended |
Sensor Exc. voltage | 3 Vrms max (15 V supply) set on SYNC Inputs: 1.76 * Sync Input (Vrms) @ 4 kHz 1.70 * Sync Input (Vrms) @ 10 kHz |
Sensor Exc. frequency | 4 kHz to 10 kHz typical, set on SYNC Inputs |
Phase compensation | -50° to +85° @ 4 kHz -75° to +70° @ 10 kHz |
TEDS | 1024-bit, 1-Wire EEPROM |
Operating temperature | -20 °C to +50 °C |
Ingress protection | IP20 |
Humidity | 5 % to 85 % RH non condensing @ 50 °C |
Dimensions | 444 x 221 x 44 mm (W x D x H) |
Weight | 2300 g |