Specifiche tecniche degli adattatori DSI

Specifiche generali degli adattatori DSI

Connectors
DAQ interface connectorDB9 Male
Sensor connectorSee individual adapter specification
Environmental
Operating Temperature-10 to 60 °C
Storage Temperature-40 to 85 °C
Humidity5 to 95 % RH non-condensing at 50 °C
IP ratingIP50
RFI susceptibility±0.5 % span error at 400 MHz, 5 W, 3 m
Shock & VibrationVibration sweep sinus (EN 60068-2-6:2008) Vibration random (EN 60721-3-2: 1997 - Class 2M2) Shock (EN 60068-2-27:2009) MIL-STD-810D
Rev: 1602676800

Specifiche DSI-THx

General specifications
Sensor connectorMini thermocouple, female
Thermocouple TypesDSI-TH-K: Type K DSI-TH-J: Type J DSI-TH-T: Type T DSI-TH-E: Type E DSI-TH-C: Type C (Obsolete)
Cold junction compensationIntegrated
CJC accuracy1.0 °C
Input impedance> 10 MΩ
BIAS current50 nA
Open TC detection
LinearisationThrough software according to the sensor type
TEDSFor adapter identification and calibration data

Precisione dell'amplificatore host DSI-THx

Measurement hardwareSIRIUSx-MULTI SIRIUSx-STGM MINITAURsSIRIUSx-STG SIRIUSx-STGMv2 SIRIUSx-HD-STGSSIRIUSx-HS-STGSIRIUSx-HD-LVDEWE-43A
Bandwidth70 kHz70 kHz70 kHz70 kHz70 kHz
Typical peak to peak noise (Type K)
30 kHz bandwidth0.44 °C0.44 °C0.5 °C0.44 °C0.44 °C
100 Hz bandwidth0.22 °C0.22 °C0.25 °C0.22 °C0.22 °C
1 Hz bandwidth0.02 °C0.02 °C0.02 °C0.02 °C0.02 °C

Precisione DSI-THx

Measurement hardwareSIRIUSi LVv2 SIRIUSi HD STGS SIRIUSi STGv2KRYPTONi STG SIRIUSi XHS-LV IOLITE STGSIRIUSi STGMv3 MINITAURsDEWE-43A SIRIUSi HD-LVSIRIUSi HS-LVv2SIRIUSi HS-STGSIRIUSi MULTI
DSI-TH-K for thermocouple type K (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-270 to 1370 °C-250 to -200 °C±3.2 [±18.2] °C±11.3 [±21.3] °C±4.9 [±18.2] °C±9.9 [±18.2] °C±2.2 [±21.3] °C±2.2 [±9.7] °C±4.9 [±34.9] °C
-200 to -100 °C±1.8 [±7.4] °C±4.8 [±8.6] °C±2.4 [±7.4] °C±4.3 [±7.4] °C±1.4 [±8.6] °C±1.4 [±4.2] °C±2.4 [±13.6] °C
-100 to 0 °C±1.4 [±4.3] °C±3.0 [±4.9] °C±1.7 [±4.3] °C±2.7 [±4.3] °C±1.2 [±4.9] °C±1.2 [±2.6] °C±1.7 [±7.5] °C
0 to 200 °C±1.3 [±3.5] °C±2.5 [±4.0] °C±1.5 [±3.5] °C±2.3 [±3.5] °C±1.1 [±4.0] °C±1.1 [±2.3] °C±1.5 [±6.0] °C
200 to 1000 °C±1.8 [±4.1] °C±2.9 [±4.4] °C±2.0 [±4.1] °C±2.8 [±4.1] °C±1.4 [±4.4] °C±1.4 [±2.6] °C±2.0 [±6.7] °C
1000 to 1370 °C±2.0 [±4.6] °C±3.2 [±4.9] °C±2.3 [±4.6] °C±3.2 [±4.6] °C±1.6 [±4.9] °C±1.6 [±2.9] °C±2.3 [±7.5] °C
DSI-TH-J for thermocouple type J (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-200 to 1200 °C-200 to -100 °C±1.6 [±5.5] °C±3.7 [±6.3] °C±2.0 [±5.5] °C±3.3 [±5.5] °C±1.3 [±6.3] °C±1.3 [±3.3] °C±2.0 [±9.8] °C
-100 to 0 °C±1.3 [±3.4] °C±2.5 [±3.9] °C±1.5 [±3.4] °C±2.3 [±3.4] °C±1.2 [±3.9] °C±1.2 [±2.2] °C±1.5 [±5.8] °C
0 to 500 °C±1.4 [±3.0] °C±2.2 [±3.3] °C±1.6 [±3.0] °C±2.1 [±3.0] °C±1.2 [±3.3] °C±1.2 [±2.0] °C±1.6 [±4.8] °C
500 to 1000 °C±1.7 [±3.2] °C±2.3 [±3.3] °C±1.8 [±3.2] °C±2.3 [±3.2] °C±1.4 [±3.3] °C±1.4 [±2.1] °C±1.8 [±4.9] °C
1000 to 1200 °C±1.8 [±3.4] °C±2.4 [±3.5] °C±2.0 [±3.4] °C±2.5 [±3.4] °C±1.5 [±3.5] °C±1.5 [±2.2] °C±2.0 [±5.1] °C
DSI-TH-T for thermocouple type T (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-270 to 400 °C-250 to -200 °C±2.7 [±14.7] °C±9.2 [±17.2] °C±4.1 [±14.7] °C±8.1 [±14.7] °C±1.9 [±17.2] °C±1.9 [±7.9] °C±4.1 [±28.1] °C
-200 to -100 °C±1.8 [±7.3] °C±4.8 [±8.4] °C±2.4 [±7.3] °C±4.2 [±7.3] °C±1.4 [±8.4] °C±1.4 [±4.2] °C±2.4 [±13.4] °C
-100 to 0 °C±1.4 [±4.5] °C±3.1 [±5.2] °C±1.7 [±4.5] °C±2.8 [±4.5] °C±1.2 [±5.2] °C±1.2 [±2.8] °C±1.7 [±8.0] °C
0 to 200 °C±1.3 [±3.6] °C±2.5 [±4.1] °C±1.5 [±3.6] °C±2.3 [±3.6] °C±1.1 [±4.1] °C±1.1 [±2.3] °C±1.5 [±6.1] °C
200 to 400 °C±1.3 [±3.0] °C±2.2 [±3.3] °C±1.5 [±3.0] °C±2.0 [±3.0] °C±1.1 [±3.3] °C±1.1 [±2.0] °C±1.5 [±4.8] °C
DSI-TH-E for thermocouple type E (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-270 to 1000 °C-250 to -200 °C±2.3 [±10.2] °C±6.5 [±11.8] °C±3.2 [±10.2] °C±5.8 [±10.2] °C±1.7 [±11.8] °C±1.7 [±5.6] °C±3.2 [±19.0] °C
-200 to -100 °C±1.5 [±5.0] °C±3.4 [±5.6] °C±1.9 [±5.0] °C±3.1 [±5.0] °C±1.3 [±5.6] °C±1.3 [±3.0] °C±1.9 [±8.7] °C
-100 to 0 °C±1.3 [±3.2] °C±2.3 [±3.6] °C±1.5 [±3.2] °C±2.1 [±3.2] °C±1.1 [±3.6] °C±1.1 [±2.1] °C±1.5 [±5.4] °C
0 to 500 °C±1.3 [±2.4] °C±1.9 [±2.6] °C±1.4 [±2.4] °C±1.8 [±2.4] °C±1.2 [±2.6] °C±1.2 [±1.7] °C±1.4 [±3.7] °C
500 to 1000 °C±1.6 [±2.8] °C±2.1 [±2.9] °C±1.8 [±2.8] °C±2.2 [±2.8] °C±1.4 [±2.9] °C±1.4 [±2.0] °C±1.8 [±4.2] °C
DSI-TH-C for thermocouple type C (DIN EN 60584-1) (OBSOLETE)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
0 to 2320 °C0 to 500 °C±1.7 [±8.4] °C±5.4 [±9.9] °C±2.5 [±8.4] °C±4.7 [±8.4] °C±1.4 [±9.9] °C±1.4 [±4.7] °C±2.5 [±15.8] °C
500 to 1000 °C±2.0 [±6.7] °C±4.4 [±7.6] °C±2.5 [±6.7] °C±4.1 [±6.7] °C±1.5 [±7.6] °C±1.5 [±3.9] °C±2.5 [±12.0] °C
1000 to 1500 °C±2.4 [±8.0] °C±5.2 [±9.0] °C±3.0 [±8.0] °C±4.9 [±8.0] °C±1.8 [±9.0] °C±1.8 [±4.6] °C±3.0 [±14.3] °C
1500 to 2000 °C±3.0 [±10.0] °C±6.4 [±11.1] °C±3.8 [±10.0] °C±6.1 [±10.0] °C±2.1 [±11.1] °C±2.1 [±5.6] °C±3.8 [±17.8] °C
2000 to 2320 °C±4.1 [±13.7] °C±8.6 [±15.1] °C±5.1 [±13.7] °C±8.4 [±13.7] °C±2.7 [±15.1] °C±2.7 [±7.6] °C±5.1 [±24.5] °C
1) Typical accuracy... when you balance the offset on the amplifier; Maximum accuracy ... when the amplifier is not balanced

Specifiche DSI-TH-UNI

General specifications
Sensor connectorMini thermocouple, female
Thermocouple TypesK, J, T, R, S, N, E, B
Cold junction compensationIntegrated
CJC accuracy0.5 °C
Input impedance> 10 MΩ
BIAS current50 nA
Bandwidthup to 150 Hz (limited by bandwidth of host amplifier)
Open TC detection
LinearisationThrough software according to the sensor type
TEDSFor adapter identification and calibration data
Dimensions52 x 31 x 15 mm (61 x 31 x 15 mm with screws)
Weight40 g

Precisione DSI-TH-UNI

Measurement hardwareSIRIUSi LVv2 SIRIUSi HD STGS SIRIUSi STGv2 SIRIUSi STGSKRYPTONi STG SIRIUSi XHS-LV IOLITE STGSIRIUSi STGMv3 MINITAURsDEWE-43A SIRIUSi HD-LVSIRIUSi HS-LVv2SIRIUSi HS-STGSIRIUSi MULTI
DSI-TH- for thermocouple type K (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-270 to 1370 °C-250 to -200 °C±2.7 [±17.7] °C±10.8 [±20.8] °C±4.4 [±17.7] °C±9.4 [±17.7] °C±1.7 [±20.8] °C±1.7 [±9.2] °C±4.4 [±34.4] °C
-200 to -100 °C±1.3 [±6.9] °C±4.3 [±8.1] °C±1.9 [±6.9] °C±3.8 [±6.9] °C±0.9 [±8.1] °C±0.9 [±3.7] °C±1.9 [±13.1] °C
-100 to 0 °C±0.9 [±3.8] °C±2.5 [±4.4] °C±1.2 [±3.8] °C±2.2 [±3.8] °C±0.7 [±4.4] °C±0.7 [±2.1] °C±1.2 [±7.0] °C
0 to 200 °C±0.8 [±3.0] °C±2.0 [±3.5] °C±1.0 [±3.0] °C±1.8 [±3.0] °C±0.6 [±3.5] °C±0.6 [±1.8] °C±1.0 [±5.5] °C
200 to 1000 °C±1.3 [±3.6] °C±2.4 [±3.9] °C±1.5 [±3.6] °C±2.3 [±3.6] °C±0.9 [±3.9] °C±0.9 [±2.1] °C±1.5 [±6.2] °C
1000 to 1370 °C±1.5 [±4.1] °C±2.7 [±4.4] °C±1.8 [±4.1] °C±2.7 [±4.1] °C±1.1 [±4.4] °C±1.1 [±2.4] °C±1.8 [±7.0] °C
DSI-TH- for thermocouple type J (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-200 to 1200 °C-200 to -100 °C±1.1 [±5.0] °C±3.2 [±5.8] °C±1.5 [±5.0] °C±2.8 [±5.0] °C±0.8 [±5.8] °C±0.8 [±2.8] °C±1.5 [±9.3] °C
-100 to 0 °C±0.8 [±2.9] °C±2.0 [±3.4] °C±1.0 [±2.9] °C±1.8 [±2.9] °C±0.7 [±3.4] °C±0.7 [±1.7] °C±1.0 [±5.3] °C
0 to 500 °C±0.9 [±2.5] °C±1.7 [±2.8] °C±1.1 [±2.5] °C±1.6 [±2.5] °C±0.7 [±2.8] °C±0.7 [±1.5] °C±1.1 [±4.3] °C
500 to 1000 °C±1.2 [±2.7] °C±1.8 [±2.8] °C±1.3 [±2.7] °C±1.8 [±2.7] °C±0.9 [±2.8] °C±0.9 [±1.6] °C±1.3 [±4.4] °C
1000 to 1200 °C±1.3 [±2.9] °C±1.9 [±3.0] °C±1.5 [±2.9] °C±2.0 [±2.9] °C±1.0 [±3.0] °C±1.0 [±1.7] °C±1.5 [±4.6] °C
DSI-TH- for thermocouple type T (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-270 to 400 °C-250 to -200 °C±2.2 [±14.2] °C±8.7 [±16.7] °C±3.6 [±14.2] °C±7.6 [±14.2] °C±1.4 [±16.7] °C±1.4 [±7.4] °C±3.6 [±27.6] °C
-200 to -100 °C±1.3 [±6.8] °C±4.3 [±7.9] °C±1.9 [±6.8] °C±3.7 [±6.8] °C±0.9 [±7.9] °C±0.9 [±3.7] °C±1.9 [±12.9] °C
-100 to 0 °C±0.9 [±4.0] °C±2.6 [±4.7] °C±1.2 [±4.0] °C±2.3 [±4.0] °C±0.7 [±4.7] °C±0.7 [±2.3] °C±1.2 [±7.5] °C
0 to 200 °C±0.8 [±3.1] °C±2.0 [±3.6] °C±1.0 [±3.1] °C±1.8 [±3.1] °C±0.6 [±3.6] °C±0.6 [±1.8] °C±1.0 [±5.6] °C
200 to 400 °C±0.8 [±2.5] °C±1.7 [±2.8] °C±1.0 [±2.5] °C±1.5 [±2.5] °C±0.6 [±2.8] °C±0.6 [±1.5] °C±1.0 [±4.3] °C
DSI-TH- for thermocouple type R (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-50 to 1768 °C0 to 100 °C±2.4 [±19.0] °C±11.6 [±22.7] °C±4.2 [±19.0] °C±9.8 [±19.0] °C±1.4 [±22.7] °C±1.4 [±9.8] °C±4.2 [±37.5] °C
100 to 200 °C±1.9 [±13.7] °C±8.4 [±16.3] °C±3.2 [±13.7] °C±7.1 [±13.7] °C±1.2 [±16.3] °C±1.2 [±7.1] °C±3.2 [±26.9] °C
200 to 500 °C±1.7 [±11.8] °C±7.3 [±14.0] °C±2.8 [±11.8] °C±6.2 [±11.8] °C±1.1 [±14.0] °C±1.1 [±6.2] °C±2.8 [±23.1] °C
500 to 1000 °C±1.6 [±9.9] °C±6.1 [±11.6] °C±2.5 [±9.9] °C±5.3 [±9.9] °C±1.1 [±11.6] °C±1.1 [±5.2] °C±2.5 [±19.1] °C
1000 to 1500 °C±1.7 [±8.5] °C±5.3 [±9.8] °C±2.4 [±8.5] °C±4.7 [±8.5] °C±1.1 [±9.8] °C±1.1 [±4.5] °C±2.4 [±16.0] °C
1500 to 1768 °C±2.0 [±8.7] °C±5.4 [±9.9] °C±2.7 [±8.7] °C±5.0 [±8.7] °C±1.3 [±9.9] °C±1.3 [±4.7] °C±2.7 [±16.2] °C
DSI-TH- for thermocouple type S (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-50 to 1768 °C0 to 100 °C±2.3 [±18.7] °C±11.4 [±22.3] °C±4.1 [±18.7] °C±9.6 [±18.7] °C±1.4 [±22.3] °C±1.4 [±9.6] °C±4.1 [±36.9] °C
100 to 200 °C±1.9 [±14.1] °C±8.6 [±16.7] °C±3.2 [±14.1] °C±7.3 [±14.1] °C±1.2 [±16.7] °C±1.2 [±7.3] °C±3.2 [±27.6] °C
200 to 500 °C±1.8 [±12.3] °C±7.6 [±14.7] °C±2.9 [±12.3] °C±6.5 [±12.3] °C±1.1 [±14.7] °C±1.1 [±6.4] °C±2.9 [±24.1] °C
500 to 1000 °C±1.7 [±10.8] °C±6.7 [±12.7] °C±2.7 [±10.8] °C±5.8 [±10.8] °C±1.1 [±12.7] °C±1.1 [±5.7] °C±2.7 [±20.9] °C
1000 to 1500 °C±1.9 [±9.4] °C±5.8 [±10.8] °C±2.7 [±9.4] °C±5.2 [±9.4] °C±1.3 [±10.8] °C±1.3 [±5.0] °C±2.7 [±17.6] °C
1500 to 1768 °C±2.2 [±10.1] °C±6.2 [±11.5] °C±3.0 [±10.1] °C±5.7 [±10.1] °C±1.4 [±11.5] °C±1.4 [±5.4] °C±3.0 [±18.8] °C
DSI-TH- for thermocouple type N (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-270 to 1300 °C-250 to -200 °C±3.9 [±28.9] °C±17.5 [±34.2] °C±6.7 [±28.9] °C±15.0 [±28.9] °C±2.2 [±34.2] °C±2.2 [±14.7] °C±6.7 [±56.7] °C
-200 to -100 °C±1.6 [±10.1] °C±6.3 [±11.9] °C±2.6 [±10.1] °C±5.4 [±10.1] °C±1.1 [±11.9] °C±1.1 [±5.3] °C±2.6 [±19.6] °C
-100 to 0 °C±1.0 [±5.2] °C±3.3 [±6.1] °C±1.5 [±5.2] °C±2.9 [±5.2] °C±0.8 [±6.1] °C±0.8 [±2.9] °C±1.5 [±9.9] °C
0 to 500 °C±0.9 [±4.3] °C±2.8 [±5.1] °C±1.3 [±4.3] °C±2.4 [±4.3] °C±0.7 [±5.1] °C±0.7 [±2.4] °C±1.3 [±8.2] °C
500 to 1000 °C±1.2 [±3.5] °C±2.3 [±3.8] °C±1.4 [±3.5] °C±2.2 [±3.5] °C±0.9 [±3.8] °C±0.9 [±2.0] °C±1.4 [±6.0] °C
1000 to 1300 °C±1.4 [±3.9] °C±2.5 [±4.2] °C±1.7 [±3.9] °C±2.5 [±3.9] °C±1.0 [±4.2] °C±1.0 [±2.3] °C±1.7 [±6.6] °C
DSI-TH- for thermocouple type E (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
-270 to 1000 °C-250 to -200 °C±1.8 [±9.7] °C±6.0 [±11.3] °C±2.7 [±9.7] °C±5.3 [±9.7] °C±1.2 [±11.3] °C±1.2 [±5.1] °C±2.7 [±18.5] °C
-200 to -100 °C±1.0 [±4.5] °C±2.9 [±5.1] °C±1.4 [±4.5] °C±2.6 [±4.5] °C±0.8 [±5.1] °C±0.8 [±2.5] °C±1.4 [±8.2] °C
-100 to 0 °C±0.8 [±2.7] °C±1.8 [±3.1] °C±1.0 [±2.7] °C±1.6 [±2.7] °C±0.6 [±3.1] °C±0.6 [±1.6] °C±1.0 [±4.9] °C
0 to 500 °C±0.8 [±1.9] °C±1.4 [±2.1] °C±0.9 [±1.9] °C±1.3 [±1.9] °C±0.7 [±2.1] °C±0.7 [±1.2] °C±0.9 [±3.2] °C
500 to 1000 °C±1.1 [±2.3] °C±1.6 [±2.4] °C±1.3 [±2.3] °C±1.7 [±2.3] °C±0.9 [±2.4] °C±0.9 [±1.5] °C±1.3 [±3.7] °C
DSI-TH- for thermocouple type B (DIN EN 60584-1)
Input RangeActual readingTypical accuracy [maximum accuracy] (see 1)
0 to 1820 °C200 to 500 °C±5.3 [±48.2] °C±29.1 [±57.7] °C±10.1 [±48.2] °C±24.4 [±48.2] °C±2.9 [±57.7] °C±2.9 [±24.3] °C±10.1 [±95.8] °C
500 to 1000 °C±2.6 [±20.2] °C±12.3 [±24.1] °C±4.5 [±20.2] °C±10.4 [±20.2] °C±1.6 [±24.1] °C±1.6 [±10.4] °C±4.5 [±39.8] °C
1000 to 1500 °C±1.8 [±11.6] °C±7.2 [±13.7] °C±2.9 [±11.6] °C±6.2 [±11.6] °C±1.2 [±13.7] °C±1.2 [±6.1] °C±2.9 [±22.5] °C
1500 to 1700 °C±1.8 [±9.6] °C±5.9 [±11.1] °C±2.7 [±9.6] °C±5.2 [±9.6] °C±1.2 [±11.1] °C±1.2 [±5.1] °C±2.7 [±18.2] °C
1700 to 1820 °C±2.0 [±9.8] °C±6.1 [±11.3] °C±2.8 [±9.8] °C±5.4 [±9.8] °C±1.3 [±11.3] °C±1.3 [±5.2] °C±2.8 [±18.5] °C
1) Typical accuracy... when you balance the offset on the amplifier; Maximum accuracy ... when the amplifier is not balanced

Specifiche DSI-RTD

Inputs specifications
Sensor connector5-pin BINDER connector series 712 09 0416 00 05 M9 socket, mates with 99 0413 00 05 M9 cable plug
Supported sensorsResistance: Pt100, Pt200, Pt500, Pt1000, Pt2000
Temperature range-200 °C to 850 °C
Input offset50 μV
Constant current1.25 mA
Constant current accuracy±0.02 % from calibrated value
Constant current drift22 ppm/ °C
LinearisationThrough software according to sensor type
Connection types2-, 3- or 4-wire
Bandwidth (-3 dB)10 kHz (limited by bandwidth of host amplifier)
Input configurationIsolated (max. 350 VDC) when using with isolated SIRIUSi modules, else differential
Typ. noise: 100 Hz bandwidth0.03 °C
Input configurationIsolated (max. 350 VDC) when using with isolated SIRIUSi modules, else differential
Amplifier settingsAutomatically selected by software - Measurement: Voltage - Range: ±0.1 V to ±10 V - Excitation: 10 V

Precisione DSI-RTD

Host amplifierSIRIUSx LVv2 / STGv2 / HS-LV / HS-STG DEWE-43A MINITAURsSIRIUSx STGMv2 / HD-LV / HD-STG KRYPTON STGSIRIUSx Multi / STGM
Resistance Range80 Ω±0.05 % of reading ±120 mΩ±0.05 % of reading ±120 mΩ±0.05 % of reading ±200 mΩ
800 Ω±0.05 % of reading ±200 mΩ±0.05 % of reading ±200 mΩ±0.05 % of reading ±840 mΩ
6 kΩ±0.05 % of reading ±840 mΩ±0.05 % of reading ±1500 mΩ±0.05 % of reading ±8 Ω
DINSensorRangeTemperature
EN 60751Pt100-200 to 850°C±0.1 % of reading ±0.69 °C±0.1 % of reading ±0.69 °C±0.1 % of reading ±2.5 °C
EN 60751Pt200-200 to 850°C±0.1 % of reading ±0.44 °C±0.1 % of reading ±0.44 °C±0.1 % of reading ±1.2 °C
EN 60751Pt500-200 to 850°C±0.1 % of reading ±0.61 °C±0.1 % of reading ±1 °C±0.1 % of reading ±4 °C
-200 to 150°C±0.1 % of reading ±0.28 °C±0.1 % of reading ±0.28 °C±0.1 % of reading ±1.2 °C
EN 60751Pt1000-200 to 850°C±0.1 % of reading ±0.39 °C±0.1 % of reading ±0.8 °C±0.1 % of reading ±3 °C
EN 60751Pt2000-200 to 550°C±0.1 % of reading ±0.29 °C±0.1 % of reading ±0.5 °C±0.1 % of reading ±1.5 °C

Specifiche DSI-ACC

Inputs specifications
Sensor connectorBNC
Supported sensorsIEPE / ICP
Amplifier settingsAutomatically selected by software - Measurement: Voltage - Range: ±0.1 V to ±10 V - Excitation: 10 V
DSI-ACCDSI-ACC-0.16HzDSI-ACC-20mADSI-ACC-0.16Hz-20mA
Sensor excitation4 mA ±10 %4 mA ±10 %20 mA ±15 %20 mA ±15 %
Compliance voltage> 22 Volt> 22 Volt> 20 Volt> 20 Volt
Accuracy 30 Hz to 30 kHz0.3 %0.07 %0.3 %0.07 %
High pass filter0.8 Hz0.16 Hz0.8 Hz0.16 Hz
Power consumption300 mW300 mW800 mW800 mW
Supported Amplifiers (exceptions)--Only on: SIRIUS LV/LV+, STG/STG+, HS-LV/HS-LV+, HS-STG/HS-STG+Only on: SIRIUS LV/LV+, STG/STG+, HS-LV/HS-LV+, HS-STG/HS-STG+
Gain drift50 ppm/°C
Max. input offset12 mV
Input impedance1 MΩ
Supply voltage±5 V (±1 %)
Input configurationIsolated (max. 350 VDC) when using with isolated SIRIUSi modules, else single ended
Bandwidthup to 500 kHz (limited by bandwidth of host amplifier)
Low-pass filter10 Hz to 100 kHz (depending on host amplifier)
Ranges100 mV, 1000 mV, 10000 mV (SIRIUS-HS series offers more ranges)
Typical SNR @ 30 kHz bandwidth
10000 mVup to 125 dB (limited by the SNR of the host amplifier)
1000 mVup to 110 dB (limited by the SNR of the host amplifier)
Rev: 1634896800

Specifiche DSI-CHG

Inputs specifications
Sensor connectorBNC
Supported sensorsCharge sensors
Accuracy0.5 % of reading
Gain drift100 ppm/°C
Supply voltage±5 V (±1 %)
Power consumptionmax. 100 mW
Input configurationIsolated (max. 350 VDC) when using with isolated SIRIUSi modules, else single-ended
Bandwidth0.07 Hz up to 300 kHz (limited by bandwidth of host amplifier)
Low-pass filter10 Hz to 100 kHz (depending on host amplifier)
Range1,000 / 10,000 / 50,000 pC (SIRIUS-HS series offers more ranges)
Typ. SNR @ 30 kHz bandwidthup to 125 dB (limited by the SNR of the host amplifier)
Max. offset20 pC (compensated in DEWESoft® by software filter)
High-pass filter0.07 Hz, 1 Hz, 10 Hz
Amplifier settingsAutomatically selected by software - Measurement: Voltage - Range: ±0.1 to ±10 V - Excitation: 10 V

Specifiche DSI-CHG-DC

Inputs specifications
Sensor connectorBNC
Supported sensorsCharge sensors
Supply voltage12 V to 15 V (±1 %)
Power consumptionMax. 0.8 W
Input configurationIsolated (max. 350 VDC) when using with isolated SIRIUSi modules, else single-ended
Accuracy0.5 % of reading
Bandwidth20 kHz (500000 pC range) to 200 kHz (50000 pC) Bandwidth may be limited on amplifiers with < 500 mW Exc. power supply
Range500000 pC 50000 pC 10000 pC 1000 pC
High-pass filter500000 pC range: - DC (filter off) - 0.14 mHz (time constant > 1000 s) - 1.4 mHz (time constant > 100 s) - 14 mHz (time constant > 10 s) - 0.14 Hz (time constant > 1 s) 50000 pC / 10000 pC / 1000 pC range: - DC (filter off) - 1.4 mHz (time constant > 100 s) - 14 mHz (time constant > 10 s) - 0.14 Hz (time constant > 1 s) - 1.4 Hz (time constant > 0.1 s)
DC drift500000 pC range: typ. < 0.1 pC/s (max. < 1 pC/s) 50000 pC / 10000 pC / 1000 pC range: typ. < 0.05 pC/s (max. < 0.5 pC/s)
Supported AmplifiersSIRIUS LV/LV+, MULTI, STGM/STGM+, STG/STG+, HD-LV, HD-STGS, HS-LV/HS-LV+, HS-STG/HS-STG+ KRYPTON-6xSTG IOLITE-6xSTG *Other amplifiers support pending
Amplifier settingsAutomatically selected by software: - Measurement: Voltage - Range: ±0.1 V to ±10 V - Excitation: 12 V / 15 V
1.) Specifications update pending
1690448400

Specifiche del DSI-V-200

Inputs specifications
Sensor connectorBNC
Ranges±200 V, ±50 V, ±5 V, ±0.5 V (SIRIUS-HS series offers more ranges)
DC Accuracy±0.06 % of reading ±0.02 % of range ±5 mV
Bandwidth (-3 dB)300 kHz (limited by bandwidth of host amplifier)
Low-pass filter10 Hz to 100 kHz (10,30,100,200,300,1k,3k,4k,10k,30k,40k,100k)
Common mode voltage range±200 V
Input overvoltage protection±250 V
Input impedance In+1 MΩ
Input impedance In-1 MΩ
Gain driftTypical 15 ppm/K (max. 30 ppm/K)
Input offset driftTypical 10 μV/K (max. 25 μV/K)
Input attenuation50 ±0.5 % (uncalibrated)
Input configurationIsolated (max. 350 VDC) when using with isolated SIRIUSi modules, else differential
Typical SNR @ 30 kHz BW98 dB @ 200 V range 98 dB @ 40 V range 79 dB @ 4 V range
160 dB DC, 110 dB @ 1 kHz
100 dB @ 100 Hz, 60 dB @ 10 kHz
Amplifier settingsAutomatically selected by software - Measurement: Voltage - Range: ±0.1 V to ±10 V - Excitation: 10 V

Specifiche DSI-20mA

Inputs specificationsDSI-20mADSIw-20mA
Input connector typeSMD terminal block with push-buttons (Direct wire: 0.2 … 0.75 mm² / 24 … 18 AWG)Waterproof DSUB9 female connector
Input range20 mA
Shunt Resistor50 Ω, Metal Foil
Input accuracyCalibrated to ±0.01 %, calibration in TEDS (uncalibrated ±0.05 %)
Temperature Coefficient±0.05 ppm/°C typical (0 °C to +60 °C) ±0.2 ppm/°C typical (-55 °C to +125 °C)
Power Rating250 mW (do NOT exceed maximum rating!)
TEDS1024-bit, 1-Wire EEPROM
Environmental ratingIP20IP67

Specifiche del DSI-5A

Inputs specificationsDSI-5A v2
Input connector typeMSTB 2,5/ 3-STF-5,08 Phoenix Contact, mates with MSTB 2,5/ 3-GF-5,08
Connector info2.5 mm² Nominal cross section
Nominal current5 A (DC or AC RMS continuous)
Pulse load1 s @ 15 A, 5 s @ 0 A
Shunt Resistor10 mΩ
Input accuracyCalibrated to ±0.1 %, calibration in TEDS
Temperature Coefficient±15 ppm/°C max (-55 °C to +125 °C)
Voltage rating300 V DC or AC RMS
TEDS1024-bit, 1-Wire EEPROM
Physical
Dimensions57 x 39 x 20 mm
Cable200 mm
Weight100 g
Rev: 1650438000

Specifiche del DSIi-10A

Inputs specifications
Input connector type4mm Banana
Current Range10 A DC or ACpeak
Accuracy0.5 % of reading
Phase Error< 0.1° (50 Hz)
Bandwidth1 kHz (0.05 dB, 0.1°) 10 kHz (0.1 dB, 1.5°) 100 kHz (0.2 dB, 6°)
TEDSFully Supported
Overload Capability100 A nominal current for < 1 sec
Zero Offset20 mA
Temperature Coefficient40 ppm/K
Environmental specifications
Dimensions65 x 44 x 24 mm
Power Supply5 V
Current Consumptionmax. 30 mA
Operating Temperature-40 °C to +55 °C
Isolation4 kVp
Safety600 V CAT III

Specifiche del DSIi-20A

Inputs specifications
Input connector type4mm Banana
Current Range20 A DC or ACpeak
Accuracy0.5 % of reading
Phase Error< 0.1° (50 Hz)
Bandwidth1 kHz (0.05 dB, 0.1°) 10 kHz (0.1 dB, 1.5°) 100 kHz (0.2 dB, 6°)
TEDSFully Supported
Overload Capability100 A nominal current for < 1 sec
Zero Offset20 mA
Temperature Coefficient40 ppm/K
Environmental specifications
Dimensions65 x 44 x 24 mm
Power Supply5 V
Current Consumptionmax. 30 mA
Operating Temperature-40 °C to +55 °C
Isolation4 kVp
Safety600 V CAT III

Specifiche DSI-LVDT

General specifications
Sensor connectorDB9 Female
Power supply Exc. Voltage10 V – 15 V, from EXC+ to EXC- outputs
Power supply Exc. Current44 mA, from EXC+ to EXC- outputs (see 1)
Output voltage1.00 V = 500 mV/V (see 2)
Output bandwidth1 kHz
Gain error1 % of Full Scale
Output TCR55 ppm/K of Full Scale
Sensor VTR = S x d, Sensitivity2000 mV/V maximum
Sensor supported typeDifferential LVDR or RVDT, Inductive Half-Bridge LVDT
Sensor Exc. voltage2.88 Vrms (differential) (see 3)
Sensor Exc. frequencySelectable 4.02 kHz / 9.60 kHz typical; 2.5% error
Phase compensation-50 ° to +85 ° at 4 kHz; -75 ° to +70 ° at 10 kHz
TEDS1024-bit, 1-Wire EEPROM (see 4)
1) Absolute maximum rating, specified for SIRIUSi.
2) For sensor VTR (Voltage Transfer Ratio) = 1000 mV/V.
3) Sinusoidal, 50 dB THD typical, not possible to sync from adapter to adapter.
4) Only one device per TEDS line is supported. Can be set to internal (adapter) or external (sensor).

Specifiche del DS-16xLVDTr

General specifications
Sensor connectorDB9 Female
Power supply Exc. Voltage10 V – 15 V, from EXC+ to EXC- outputs (SIRIUS STGv2 = 15 V supply)
Power consumption per channel320 mW (15 V supply, no load) 800 mW (15 V supply, 100 R load on 3 Vrms)
Output voltage max.500 mV for 1000 mV/V HB LVDT
Output bandwidth1 kHz (-6 dB, 90° phase)
Gain error1 % of Full Scale
Output TCR55 ppm/K of Full Scale
Sensor supported typeFull Bridge / Half-Bridge LVDT impedance min. 120 R.
SYNC Input Voltage500 mVrms typical recommended 1700 mVrms max recommended
Sensor Exc. voltage3 Vrms max (15 V supply) set on SYNC Inputs: 1.76 * Sync Input (Vrms) @ 4 kHz 1.70 * Sync Input (Vrms) @ 10 kHz
Sensor Exc. frequency4 kHz to 10 kHz typical, set on SYNC Inputs
Phase compensation-50° to +85° @ 4 kHz -75° to +70° @ 10 kHz
TEDS1024-bit, 1-Wire EEPROM
Operating temperature-20 °C to +50 °C
Ingress protectionIP20
Humidity5 % to 85 % RH non condensing @ 50 °C
Dimensions444 x 221 x 44 mm (W x D x H)
Weight2300 g
Torna all'inizio