SIRIUS® XR Technische Daten

• Spezifikationen des SIRIUS® XR-Systems
• SIRIUS® XR-Gateway-Spezifikationen
• Merkmale der SIRIUS® XR SBOX
• SIRIUS® XR9 Spezifikationen
• SIRIUS® XR5 Spezifikationen
• SIRIUS® XHS Verstärker Übersicht
• SIRIUS® XHS HybridADC Spezifikationen
• SIRIUS® XHS HybridADC Filterung Spezifikation
• SIRIUS® XHS Standard-Zählerspezifikationen
• SIRIUS® XHS Zähler mit variabler Auslösung Spezifikationen
• SIRIUS® XHS UNI Verstärker Spezifikationen
• SIRIUS® XHS ACC Verstärker Spezifikationen (duplicate)
• SIRIUS® XHS CHG Verstärker Spezifikationen (Rack)
• SIRIUS® XHS HV-Verstärker Spezifikationen
• SIRIUS® XHS LV Verstärker Spezifikationen (duplicate)
• SIRIUS® X Verstärker Übersicht
• SIRIUS® X ADC und technische Daten zur Filterung
• Technische Daten SIRIUSr-X-16xUNI
• Technische Daten des SIRIUSir-8xUNI
• Technische Daten SIRIUSr-X-16xACC
• Technische Daten SIRIUSr-X-16xLVe
• Technische Daten SIRIUSr-X-32xLV
• Technische Daten SIRIUSr-X-16xSTGS
• Technische Daten SIRIUSir-8x-CAN-FD

SIRIUS® XR-Gateway-Spezifikationen

XR-GATEWAY, Interfaces and options
ON pushbutton	illuminated pushbutton, system power On/Off
Ethernet	2x 10G SFP (copper or fiber)
EtherCAT®	2x RJ45, 100 Mbps Full Duplex In/Out
Synchronisation	PTP IEEE 1588v2 synchronization 2x SIRIUS® SYNC (IRIG-B-DC) 2x SMA female 10 MHz clock reference In/Out 2x SFP for White Rabbit precision synchronisation
Analog reference input	LEMO L00B2f (for SIRIUS XHS CAL-REF option)
GPS connector	DSUB9f with GPS PPS out, Remote on, GPS display and com. UART, Supply: +5 V 500 mA, +12V 250 mA
Remote power on	On > 4 to 48 V Off < 0.5 V
GPS (option)	10 Hz or 100 Hz with RTK, SMA female
GPS display (option)	External on DSUB9f connector
Power supply input	12 - 48 V DC 31 A max. LEMO L2B2m
Power consumption	12 W, XR-GATEWAY
Environmental
Operating Temperature	-10 to 50 °C
Storage Temperature	-30 to 85 °C
Operating Humidity	10 to 90 % RH non-condensing
Storage Humidity	5 to 95 % RH non-condensing
IP rating	IP20
Shock & Vibration	Vibration sweep sinus (EN 60068-2-6:2008) Vibration random (EN 60721-3-2: 1997 - Class 2M2) Shock (EN 60068-2-27:2009) MIL-STD-810D
Physical
Dimensions	267 x 155 x 25 mm
Weight	560g
Rev: 1775120400

Merkmale der SIRIUS® XR SBOX

Computer
Processor	Intel® Xeon® W-11555MRE Processor (12M Cache- up to 4.50 GHz)
Memory	64 GB DDR4-3200 SO-DIMM
Storage	Non-removable 1 TB M.2 NVMe
Interfaces and options
USB Front	4x USB 3.1 SuperSpeed+ 10 Gbps
Ethernet	1x 2.5 GLAN (RJ45)
Video	1x HDMI 1x DVI-I, VGA analog on DVI-I connector (supports DVI only or VGA only)
Cartridge 1	2x PCIe x1 (for M.2 WiFi, secondary storage)
Cartridge 2	1x PCIe x4 (for M.2 removable storage)
Rack connectivity
Ethernet	1x 10 GLAN for DAQ data (SIRIUS XHS or SIRIUS X)
EtherCAT®	1x EtherCAT® 100 Mbps Full Duplex (SIRIUS XHS or SIRIUS X)
PCI Express	x4 PCIe for DAQ data (SIRIUS XHS) x8 PCIe to GPU
Power
Power supply	12 - 48 V DC
Power consumption	30 W minimum, CPU idle 90 W sustained max CPU load 130 W peak power
Environmental
Operating Temperature	0 to 50 °C
Storage Temperature	-30 to 85 °C
Operating Humidity	10 to 90 % RH non-condensing
Storage Humidity	5 to 95 % RH non-condensing
IP rating	IP20
Shock & Vibration	Vibration sweep sinus (EN 60068-2-6:2008) Vibration random (EN 60721-3-2: 1997 - Class 2M2) Shock (EN 60068-2-27:2009) MIL-STD-810D
Physical
Dimensions	267 x 155 x 45 mm, rack slice version
Weight	1120 g
Rev: 1775120400

SIRIUS® XHS UNI Verstärker Spezifikationen

Inputs
Input types	Voltage Full / Half / Quarter bridge strain (120 Ω and 350 Ω) Potentiometer, RTD, Resistance Current (ext. Shunt) IEPE
ADC Type	Hybrid ADC - alias free up to 2 MS/s, 16-bit up to 15 MS/s
Sampling Rate	Simultaneous 15 MS/s
Filtering	AAF 1MHz (6th order Butterworth)
Analog bandwidth	5 MHz
Voltage Mode
Ranges	±100, 50, 20, 10, 5, 2.5, 1, 0.5, 0.25, 0.1 and 0.05 V
Input Accuracy	Signal frequency	Accuracy
	DC	±0.03 % of reading ±0.025 % of range ±40 μV (1 mV for Ranges ≥ 10 V)
	Up to 1 kHz	±0.03 % of reading ±0.02 % of range
	Up to 10 kHz	±0.1 % of reading ±0.05 % of range
	Up to 100 kHz	±2 % of reading ±0.1 % of range
	Up to 1000 kHz	±5 % of reading ±0.5 % of range
Typ. Noise floor	Sample rate, filter \ Range →	100 V	5 V	0.5 V	0.05 V
	15 MS/s, Filter off	-81 dB	-81 dB	-75 dB	-56 dB
	1 MS/s, Filter on	-94 dB	-94 dB	-84 dB	-64 dB
	100 kS/s, Filter on	-104 dB	-105 dB	-100 dB	-81 dB
	10 kS/s, Filter on	-113 dB	-114 dB	-107 dB	-88 dB
Typical CMR	Frequency \ Range →	100 V	5 V	0.5 V	0.05 V
	50 Hz	83 dB	92 dB	100 dB	100 dB
	400 Hz	82 dB	91 dB	89 dB	88 dB
	10 kHz	67 dB	77 dB	77 dB	77 dB
Gain Drift	Typical 15 ppm/K, Max. 30 ppm/K
Offset Drift	Range < 10 V: Typ. 1 μV/K + 2 ppm of range/K, Max 4 μV/K + 8 ppm of range/K Range ≥ 10 V: Typ. 50 μV/K + 2 ppm of range/K, Max. 150 μV/K + 6 ppm of range/K
Gain Linearity	< 0.01 %
Inter channel phase mismatch	0.005° * fin [kHz] + 0.0002°
Channel Cross talk	Range ≥ 10 V: -100 dB @ 10 kHz Range < 10 V: -140 dB @ 10 kHz
Input Coupling	DC AC 0.15 Hz for all ranges
Input Impedance	Range < 10 V: > 1 GΩ; Range ≥ 10 V: 1 MΩ | 110 pF between INx to GND
Overvoltage Protection	Range ≥ 10 V: 300 V continuous Range < 10 V: 100 V (200 V peak for 10 ms)
Max. common mode voltage Isolation voltage	420 Vdc (300 Vacrms)
Excitation Voltage
Polarity	Unipolar or Bipolar Software selectable (programmable 16-bit DAC)
Excitation Level	Unipolar and Bipolar 0.15 V .. 24 V; Predefined levels: 1, 2, 5, 10, 12, 15, 20 and 24 V
Accuracy	±0.05 % ±2 mV
Drift	±10 ppm/K ±100 μV/K
Load stability 0 % to 100 % load	< 0.01 %
Line regulation over 20 Ω of change	< 0.005 % @ 120 Ω load
Noise @ 10 Volt / 350 Ω	< 300 μVrms @ 10 kHz BW
Impedance Sense to Exc Sense to GND	100 kΩ (0.5 Ohm with internal excitation sense) > 100 MΩ
Current limit	100 mA (max. 800 mW)
Protection	Continuous short to ground
Excitation Current
Excitation Current	Free programmable (16-bit DAC)
Ranges	100 µA - 1 mA	1 mA - 20 mA	20 mA - 100 mA
Accuracy	±0.2 % ±0.5 μA	±0.15 % ±2 μA	±0.01 % ±40 μA
Drift	15 ppm/K	15 ppm/K	20 ppm/K
Output Impedance	> 1 MΩ
Bridge Connection Types
Bridge types	Full / Half / Quarter bridge (3-wire or 4-wire) / Quarter Constant Current (2-wire or 4-wire)
Ranges	2 mV/V…1000 mV/V free programmable
Internal Bridge Completion	½ bridge and ¼ bridge 120 Ω and 350 Ω
Bridge Completion Accuracy	0.05 %; TCR: 2 ppm/K (others on request)
Internal Shunt Resistor	59.88 kΩ and 175 kΩ, software selectable (others on request)
Typ. Shunt Resistor Accuracy	0.05 %; TCR: 10 ppm/K (others on request)
Input Short, Sensor Offset Adjust	Software selectable
Lead-wire compensation	Automatic
IEPE mode
IEPE Current	Free programmable (16-bit DAC)
Predefined levels	2, 4, 8, 12, 16 and 20 mA
Compliance voltage	24 V
Output Impedance	> 1 MΩ
Sensor detection	Shortcut: < 4 V; Open: > 19 V
Additional Specifications
Input connector	DSUB-9 (others on request)
TEDS support	Class 1 (IEPE) and Class 2
DSI® adapters support	Yes
Rev: 1767686300

SIRIUS® XHS ACC Verstärker Spezifikationen (duplicate)

Inputs
Input types	Voltage, IEPE
ADC Type	Hybrid ADC - alias free up to 2 MS/s, 16-bit up to 15 MS/s
Sampling Rate	Simultaneous 15 MS/s
Filtering	AAF 1 MHz (6th order)
Analog bandwidth (-3 dB)	5 MHz
Voltage Mode
Ranges	±10, 5, 2, 1, 0.4 and 0.2 V
Input Accuracy	DC	±0.03 % of reading ±0.02 % of range ±50 μV
	Up to 1 kHz	±0.04 % of reading ±0.02 % of range
	Up to 10 kHz	±0.06 % of reading ±0.05 % of range
	Up to 100 kHz	±0.1 % of reading ±0.1 % of range
	Up to 1000 kHz	±5 % of reading ±0.5 % of range
Noise floor, Typ.	Sample rate, filter \ Range →	10 V	5 V	2 V	1 V	0.4 V	0.2 V
	15 MS/s, Filter off	-85 dB	-84 dB	-83 dB	-82 dB	-77 dB	-72 dB
	1 MS/s, Filter on	-98 dB	-98 dB	-97 dB	-95 dB	-92 dB	-87 dB
	100 kS/s, Filter on	-109 dB	-107 dB	-108 dB	-107 dB	-103 dB	-98 dB
	10 kS/s, Filter on	-119 dB	-119 dB	-119 dB	-118 dB	-114 dB	-109 dB
CMR, Typ.	Frequency \ Range →	10 V	5 V	2 V	1 V	0.4 V	0.2 V
	50 Hz	141 dB	141 dB	139 dB	133 dB	121 dB	120 dB
	400 Hz	130 dB	133 dB	136 dB	137 dB	137 dB	131 dB
	1 kHz	122 dB	125 dB	127 dB	129 dB	130 dB	131 dB
Gain Drift	Typical 10 ppm/K, max. 30 ppm/K
Offset Drift	Typical 0.5 μV/K + 1 ppm of range/K, max. 2 μV/K + 4 ppm of range/K
Gain Linearity	< 0.02 %
Inter Channel Phase-mismatch	0.005° * fin [kHz] + 0.0002°
Channel Cross talk	-145 dB typ. @ 1 kHz
Input Coupling	DC or AC (1 Hz, 0.1 Hz)
Input Impedance	1 MΩ
Overvoltage Protection	50 V continuous; 200 V peak (10 msec)
Max. common mode voltage Isolation voltage	140 Vdc (100 Vacrms)
IEPE mode
Excitation	2 mA, 4 mA, 8 mA, 12 mA, 16 mA, 20 mA
Compliance voltage	24 V
Output Impedance	> 10 kΩ
Sensor detection	Shortcut: < 4 V; Open: > 19 V
Additional Specifications
Input connector	BNC
TEDS support	IEPE mode only
Rev: 1623052800

SIRIUS® XHS CHG Verstärker Spezifikationen (Rack)

Inputs
Input types	Voltage IEPE Charge
ADC Type	Hybrid ADC - alias free up to 2 MS/s, 16-bit up to 15 MS/s
Sampling Rate	Simultaneous 15 MS/s
Filtering	AAF 1 MHz (6th order)
Analog bandwidth (-3 dB)	5 MHz
Voltage Mode
Ranges	±10 V, ±5 V, ±1 V, ±0.5 V, ±0.1 V
Input Accuracy	DC	±0.03 % of reading ±0.02 % of range ±50 μV
	Up to 1 kHz	±0.04 % of reading ±0.02 % of range
	Up to 10 kHz	±0.06 % of reading ±0.05 % of range
	Up to 100 kHz	±0.1 % of reading ±0.1 % of range
	Up to 1000 kHz	±5 % of reading ±0.5 % of range
Noise floor, Typ.	Sample rate, filter \ Range →	10 V	5 V	1 V	0.5 V	0.1 V
	15 MS/s, Filter off	-75 dB	-75 dB	-74 dB	-73 dB	-53 dB
	1 MS/s, Filter on	-89 dB	-89 dB	-88 dB	-88 dB	-80 dB
	100 kS/s, Filter on	-99 dB	-99 dB	-98 dB	-98 dB	-89 dB
	10 kS/s, Filter on	-109 dB	-109 dB	-107 dB	-107 dB	-95 dB
CMR, Typ.	Frequency \ Range →	10 V	5 V	1 V	0.5 V	0.1 V
	50 Hz	133 dB	135 dB	122 dB	124 dB	108 dB
	400 Hz	128 dB	130 dB	133 dB	131 dB	117 dB
	10 kHz	98 dB	99 dB	106 dB	108 dB	107 dB
Channel Cross talk	< -160 dB typ. @ 1 kHz
Gain Drift	Typical 10 ppm/K, max. 30 ppm/K
Offset Drift	Typical 2 μV/K + 1 ppm of range/K, max 8 μV/K + 3 ppm of range/K
Gain Linearity	< 0.02 %
Inter Channel Phase-mismatch	0.005° * fin [kHz] + 0.0002°
Input Coupling	DC or AC (0.1 Hz, 1 Hz)
Input Impedance	10 MOhm
Overvoltage Protection	50 V continuous; 200 V peak (10 msec)
Max. common mode voltage Isolation voltage	100 Vdc (100 Vacrms)
IEPE mode
Ranges	±10 V, ±5 V, ±1 V, ±0.5 V, ±0.1 V
Excitation	2 mA, 4 mA, 8 mA, 12 mA, 16 mA, 20 mA
Compliance voltage	24 V
Output Impedance	> 10 kΩ
Sensor detection	Shortcut: < 4 V; Open: > 19 V
Charge mode
Charge ranges	±500000 pC, ±50000 pC, ±10000 pC, ±5000 pC, ±1000 pC
Input Accuracy	±0.5 % of reading ±0.05 % of range ±2 pC
Input Coupling	±500000 pC range: - DC (filter off) - 1.45 mHz (time constant > 100 s) - 14.5 mHz (time constant > 10 s) - 145 mHz (time constant > 1 s) ±50000 pC, ±10000 pC, ±5000 pC, ±1000 pC range: - DC (filter off) - 14.5 mHz (time constant > 10 s) - 145 mHz (time constant > 1 s) - 1.45 Hz (time constant > 0.1 s) ±20 % cutoff frequency accuracy
DC drift	typ. < 1 pC/s, max. 5 pC/s
Charge injection	1 Vrms, 20 Hz, ±3 % accuracy
Additional Specifications
Input connector	BNC (others on request)
TEDS support	IEPE mode only
Rev: 1775113000

SIRIUS® XHS HV-Verstärker Spezifikationen

Inputs
ADC Type	Hybrid ADC - alias free up to 2 MS/s, 16-bit up to 15 MS/s
Sampling Rate	Simultaneous 15 MS/s
Filtering	AAF 1 MHz (6th order)
Analog bandwidth (-3 dB)	5 MHz
Voltage Mode
Ranges	±2000 V, ±1000 V, ±400 V, ±200 V
Input Accuracy	Signal frequency	Accuracy
	DC to 1 kHz	±0.03 % of reading ±0.02 % of range
	Up to 10 kHz	±0.1 % of reading ±0.05 % of range
	Up to 100 kHz	±4 % of reading ±0.1 % of range
	Up to 1000 kHz	±5 % of reading ±0.5 % of range
Noise floor, Typ.	Sample rate / Range →	2000 V	1000 V	400 V	200 V
	15 MS/s	-84 dB	-82 dB	-79 dB	-75 dB
	1 MS/s	-95 dB	-93 dB	-85 dB	-78 dB
	100 kS/s	-108 dB	-106 dB	-100 dB	-95 dB
	10 kS/s	-117 dB	-115 dB	-109 dB	-104 dB
CMR, Typ.	101 dB @ 50 Hz, 74 dB @ 400 Hz
Channel Crosstalk	-116 dB typ. @ 50 Hz, -89 dB typ. @ 1 kHz
Gain Drift	Typical 20 ppm/K, max. 40 ppm/K
Offset Drift	Typical 1.5 mV/K + 1 ppm of range/K, max 3 mV/K + 2 ppm of range/K
Gain Linearity	< 0.01 %
Input Coupling	DC
Input Impedance	10 MΩ | 1 pF
Overvoltage category	CAT II 1000 V
Maximum input voltage	2000 Vdc or 2000 Vpk (1414 Vacrms)
Additional Specifications
Input connector	Banana
Rev: 1698322800

SIRIUS® XHS LV Verstärker Spezifikationen (duplicate)

Inputs	Voltage
ADC Type	Hybrid ADC - alias free up to 2 MS/s, 16-bit up to 15 MS/s
Sampling Rate	Simultaneous 15 MS/s
Filtering	AAF 1 MHz (6th order)
Analog bandwidth (-3 dB)	5 MHz
Voltage Mode
Ranges	±100, 50, 20, 10, 5, 2.5, 1, 0.5, 0.25, 0.1 and 0.05 V
Input Accuracy	DC	±0.03 % of reading ±0.02 % of range ±100 μV (2 mV for Ranges ≥ 10 V)
	Up to 1 kHz	±0.03 % of reading ±0.02 % of range
	Up to 10 kHz	±0.1 % of reading ±0.05 % of range
	Up to 100 kHz	±2 % of reading ±0.1 % of range
	Up to 1000 kHz	±5 % of reading ±0.5 % of range
Noise floor, Typ.	Sample rate, filter \ Range →	100 V	5 V	0.5 V	0.05 V
	15 MS/s, Filter off	-82 dB	-78 dB	-65 dB	-51 dB
	1 MS/s, Filter on	-94 dB	-95 dB	-88 dB	-69 dB
	100 kS/s, Filter on	-104 dB	-105 dB	-100 dB	-81 dB
	10 kS/s, Filter on	-113 dB	-114 dB	-107 dB	-87 dB
CMR, Typ.	Frequency \ Range →	100 V	5 V	0.5 V	0.05 V
	50 Hz	91 dB	102 dB	98 dB	100 dB
	400 Hz	86 dB	75 dB	90 dB	98 dB
	10 kHz	66 dB	74 dB	82 dB	83 dB
Channel Crosstalk	Range ≥ 10 V: -105 dB @ 10 kHz Range < 10 V: -120 dB @ 10 kHz
Gain Drift	Typical 10 ppm/K, max. 30 ppm/K
Offset Drift	Range ≥ 10 V: Typ. 100 μV/K + 1 ppm of range/K, Max 250 μV/K + 2 ppm of range/K Range < 10 V: Typ. 4 μV/K + 1 ppm of range/K, Max 8 μV/K + 2 ppm of range/K
Gain Linearity	< 0.03 %
Input Coupling (see 1)	DC, AC 1 Hz
Input Impedance	Range < 10 V: 10 MΩ; Range ≥ 10 V: 1 MΩ | 110 pF between INx to GND
Overvoltage Protection	Range ≥ 10 V: 300 V continuous Range < 10 V: 100 V (200 V peak for 10 msec)
Max. common mode voltage Isolation voltage	420 Vdc (300 Vacrms)
Excitation Voltage
Polarity	Unipolar or Bipolar Software selectable (programmable 16-bit DAC)
Excitation Level	Unipolar 1 .. 24 V; Predefined levels: 1, 2, 2.5, 5, 10, 12, 15, 20 and 24 VDC
Excitation Level	Bipolar 2.5 .. 30 V; Predefined levels: 2.5, 5, 10, 12, 15, 24 and 30 VDC
Drift	±10 ppm/K ±150 μV/K
Stability 10% to 90% load (bipolar)	< 0.01 %
Current limit	200 mA (2 Watt max. per Channel, 12 Watt max. per Slice)
Additional Specifications
Input connector	DSUB 9, BNC, Banana (others on request)
TEDS support	Standard + DSI® adapters
Rev: 1701403200
1) In- must be within ±10 V referred to GND (iso); for Ranges ≥ 10 V the DC value of In- is not rejected

Technische Daten SIRIUSr-X-16xUNI

Analog inputs		SIRIUS X 16xUNI
Input type		Voltage Full/Half/Quarter bridge strain (120 Ω and 350 Ω) IEPE Potentiometer, RTD, Resistance Current (ext. and int. Shunt)
Number of channels		16
ADC Type		24-bit delta-sigma with anti-aliasing filter (-3 dB @ 160 kHz) Butterworth 2nd order
Sampling Rate		Simultaneous 200 kS/sec per channel (software-selectable)
Voltage mode
Voltage Ranges		±100 V	±10 V	±1 V	±0.1 V
Input Accuracy	DC	±0.03 % of reading ±0.02 % of range
Noise floor, Typ.	10 kS/s / 100 kS/s / 200 kS/s	115 dB / 105 dB / 104 dB	116 dB / 106 dB / 105 dB	114 dB / 105 dB / 103 dB	100 dB / 90 dB / 86 dB
Dynamic Range, Typ.	10 kS/s / 100 kS/s / 200 kS/s	-152 dB / -152 dB / -152 dB	-150 dB / -153 dB / -153 dB	-150 dB / -151 dB / -152 dB	-137 dB / -137 dB / -137 dB
CMR, Typ. 0 dBFS sine wave @ 50 Hz / 400 Hz / 1 kHz	200 kS/s	85 dB / 69 dB /60 dB	85 dB / 85 dB / 85 dB	105 dB / 105 dB / 102 dB	113 dB / 110 dB / 104 dB
THD, Typ. -1 dBFS sine wave @ 1 kHz	200 kS/s	-91 dB	-101 dB	-100 dB	-107 dB
Gain Linearity		< 0.02 %
Gain Drift		Typ. 10 ppm/K, max. 40 ppm/K
Offset Drift		Typ. 0.3 μV/K + 2 ppm of range/K, max. 0.8 μV/K + 10 ppm of range/K
Channel Cross talk typ. @ 1 kHz / 10 kHz		-100 dB / -86 dB	-135 dB / -120 dB	-135 dB / -120 dB	-119 dB / -110 dB
Input Coupling		DC, AC 0.15 Hz
Input Impedance		2 MΩ between IN+ and IN-	>1 GΩ between IN+ and IN-
Max. Common Mode Voltage		±120 V	±12 V
Overvoltage Protection		±200 V continuously	±100 V continuously / 200 Vpeak for 10 ms
Analog input performance
Sample rate		SR ≤ 2 kS/s		SR > 2 kS/s
Bandwidth (-3 dB)		0.489*fs		0.433*fs
Alias-free Bandwidth		DC to 0.44*fs		DC to 0.499*fs
Alias Rejection		-105 dB (all sample rates)
Delay Through ADC		34 / fs
Oversampling		32
Current mode (internal shunt)
Ranges		20 mA		2 mA
Input Accuracy		±0.03 % of reading, ±0.02 % of range, ±2.1 μA
Internal Shunt Resistor		47 Ω
Protection		Typ. trip current: Imax ≥ 31 mA; auto retry on 800 ms (clamp voltage 33 V)
Excitation Voltage
Excitation Voltage		Free programmable (16-bit DAC)
Predefined levels		24 V DC
Accuracy		±0.05 % ±2 mV
Drift		±10 ppm/K ±100 μV/K
Load stability		0 % to 100 % load <0.01 %
Noise @ 10 V / 350 Ω		<150 μVrms @ 10 kS/s
Line regulation over 20 Ω of change		<0.005 % @ 120 Ω load
Sense Impedance to Exc / to GND		100 kΩ / >100 MΩ
Current limit		100 mA (max. 800 mW)
Protection		Continuous short to ground
Excitation Current
Excitation Current		Free programmable (16-bit DAC)
Predefined levels		0.1, 1, 2, 5, 10, 20, 60 and 100 mA DC
Ranges		0.1 - 1 mA		>1 - 20 mA	>20 - 100 mA
Accuracy		±0.2 % ±0.5 μA		±0.15 % ±2 μA	±0.01 % ±40 μA
Drift Typical		5 ppm/K		10 ppm/K	25 ppm/K
Compliance voltage		24 V, max. 600 mW
Output Impedance		>100 MΩ
Bridge Connection Types
Bridge types		Full / Half / Quarter bridge (3-wire or 4-wire) / Quarter Constant Current (2-wire or 4-wire)
Ranges		2 - 1000 mV/V free programmable
Internal Bridge Completion		Half and Quarter bridge 120 Ω and 350 Ω
Typ. Bridge Completion Accuracy		0.05 %; TCR: 2 ppm/K (others on request)
Internal Shunt Resistor		100 kΩ, software selectable (others on request)
Typ. Shunt Resistor Accuracy		0.05 %; TCR: 10 ppm/K (others on request)
Input Short, Sensor Offset Adjust		Software selectable
IEPE mode
IEPE Current		Free programmable (16-bit DAC)
Predefined levels		2, 4, 8, 12, 16 or 20 mA
Compliance voltage		25 V
Output Impedance		>100 kΩ
Sensor detection		Shortcut: <4 V; Open: >19 V
Additional Specifications
Modular		SIRIUS X 16xUNI
Input connector		D-SUB9
Isolation voltage		250 Vpeak channel to ground (functional isolation)
TEDs support		Standard + DSI® adapters
Power supply		9 - 57 V DC, Power over Ethernet: 48 - 57 V DC (PoE++ power delivery)
Power consumption	Lemo @Typ. 24 V / MAX. 56 V	Voltage mode: Typ. 15.6 W / Max. 19 W Voltage mode with load: Typ. 45 W / Max. 49 W (Load: 0.8W per channel)
	PoE @Min. 48 V / MAX. 56 V	Voltage mode: Typ. 18.5 W / Max. 19.5 W Voltage mode with load: Typ. 48.2 W / Max. 49.5 W (Load: 0.8W per channel)
Weight		2140 g
Slice Dimensions		266 mm x 149 mm x 55 mm
Rack		SIRIUSr X 16xUNI
Input connector		D-SUB9
Isolation voltage		250 Vpeak channel to ground (functional isolation)
TEDs support		Standard + DSI® adapters
Power supply		12 - 48 V DC
Power consumption	Lemo @Typ. 24 V / Max. 48 V	Voltage mode: Typ. 14.3 W / Max.18 W Voltage mode with load: Typ. 46.5 W / Max. 50 W (Load: 0.8W per channel)
Weight		1240 g
Slice Dimensions		266 mm x 143 mm x 45 mm
Rev: 1775131200

Technische Daten des SIRIUSir-8xUNI

Analog inputs		SIRIUSi X 8xUNI
Input type		Voltage Full / Half / Quarter bridge strain (120 Ω and 350 Ω) Potentiometer, RTD, Resistance Current (ext. Shunt) IEPE
Number of channels		8
ADC Type		24-bit, delta-sigma with anti-aliasing filter (-3 dB @ 400 kHz)
Sampling Rate		Simultaneous 500 kS/sec per channel (software-selectable)
Voltage mode
Voltage Ranges		±100 V	±10 V	±1 V	±0.1 V
Input Accuracy	DC	±0.03 % of reading ±0.02 % of range
Noise floor, Typ.	100 S/s / 1 kS/s / 10 kS/s / 100 kS/s / 500 kS/s	-135 dB / -127 dB / -117 dB / -108 dB / -99 dB	-137 dB / -128 dB / -118 dB / -109 dB / -103 dB	-134 dB / -125 dB / -116 dB / -106 dB / -99 dB	-116 dB / -108 dB / -99 dB / -90 dB / -81 dB
Dynamic Range, Typ.	500 kS/s	-151 dB	-152 dB	-148 dB	-131 dB
CMR, Typ. -1 dBFS sine wave @ 50 Hz / 400 Hz / 1 kHz	10 kS/s	81 dB / 63 dB / 55 dB	85 dB / 85 dB / 85 dB	105 dB / 105 dB /102 dB	99 dB / 99 dB / 98 dB
Gain Linearity		±0.01 %
Gain Drift		Typical 10 ppm/K Max. 40 ppm/K
Offset Drift		Typical 0.3 μV/K + 2 ppm of range/K Max 0.8 μV/K + 10 ppm of range/K
Channel Cross talk typ. @ 1 kHz		-104 dB	-153 dB	-150 dB	-131 dB
Input Coupling		DC, AC 0.15 Hz
Input Impedance		2 MΩ between IN+ and IN-	>1 GΩ between IN+ and IN-
Max. Common Mode Voltage		±120 V	±12 V
Overvoltage Protection		±200 V, continuous	±100 V continuous / ±200 V peak (10 ms)
Current mode (internal shunt)
Ranges		20 mA		2 mA
Input Accuracy		±0.03 % of reading, ±0.02 % of range, ±2.1 μA
Internal Shunt Resistor		47 Ω
Excitation Voltage
Excitation Voltage		Free programmable (16-bit DAC)
Predefined levels		1, 2.5, 5, 10, 12, 15, 20, 24 V
Accuracy		±0.05 % ±2 mV
Drift		±10 ppm/K ±100 μV/K
Load stability		< 0.01 %
Noise @ 10 V / 350 Ω		<150 μVrms @ 10 kS/s
Line regulation over 20 Ω of change		<0.005 % @ 120 Ω load
Sense Impedance to Exc / to GND		100 kΩ / >100 MΩ
Current limit		100 mA (max. 800 mW)
Protection		Continuous short to ground
Excitation Current
Excitation Current		Free programmable (16-bit DAC)
Predefined levels		0.1, 1, 2, 5, 10, 20, 60 mA
Ranges		0.1 - 1 mA		>1 - 20 mA	>20 - 100 mA
Accuracy		±0.2 % ±0.5 μA		±0.15 % ±2 μA	±0.1 % ±10 μA
Drift Typical		±5 ppm/K ± 5 nA/K		±10 ppm/K ± 10 nA/K	±40ppm/K ± 200 nA/K
Compliance voltage		24 V, max. 800 mW
Output Impedance		>100 MΩ
Bridge Connection Types
Bridge types		Full / Half / Quarter bridge (3-wire or 4-wire) / Quarter Constant Current (2-wire or 4-wire)
Ranges		2 - 1000 mV/V free programmable
Internal Bridge Completion		½ bridge and ¼ bridge 120 Ω and 350 Ω
Typ. Bridge Completion Accuracy		0.05 %; TCR: 2 ppm/K
Internal Shunt Resistor		100 kΩ, software selectable
Typ. Shunt Resistor Accuracy		0.05 %; TCR: 10 ppm/K
Input Short, Sensor Offset Adjust		Software selectable
IEPE mode
IEPE Current		Free programmable (16-bit DAC)
Predefined levels		2, 4, 8, 12, 16 and 20 mA
Compliance voltage		24V
Output Impedance		>100 kΩ
Sensor detection		Shortcut: <4 V; Open: >19 V
Additional Specifications
Modular		SIRIUSi X 8xUNI
Input connector		D-SUB9
Isolation voltage		CH - GND and CH - CH isolated Secondary circuits CAT II 150V
TEDs support		Standard + DSI® adapters
Power supply		9 - 57 V DC Power over Ethernet: 48 - 57 V DC (PoE++ power delivery)
Power consumption	Lemo @Typ. 24 V / MAX. 56 V	Voltage mode: Typ. 12.1 W / Max. 14.4 W Voltage mode with load: Typ. 27.4 W / Max. 30 W (Load: 0.8W per channel)
	PoE @Min. 48 V / MAX. 56 V	Voltage mode: Typ. 14.7 W / Max. 15.3 W Voltage mode with load: Typ. 34.6 W / Max. 35.3 W (Load: 0.8W per channel)
Weight		1965 g
Slice Dimensions		266 mm x 149 mm x 55 mm
Rack		SIRIUSir X 8xUNI
Input connector		D-SUB9
Isolation voltage		CH - GND and CH - CH isolated Secondary circuits CAT II 150V
TEDs support		Standard + DSI® adapters
Power supply		12 - 48 V DC
Power consumption	Lemo @Typ. 24 V / Max. 48 V	Voltage mode: Typ. 10.4 W / Max.11.5 W Voltage mode with load: Typ. 25.9 W / Max. 27.6 W (Load: 0.8W per channel)
Weight		1100 g
Slice Dimensions		266 mm x 143 mm x 45 mm
Rev: 1775131200