IOLITE® X Tekniska specifikationer
- Teknisk specifikation för IOLITE® X-systemet
- Översikt över IOLITE® X-förstärkare
- Tekniska specifikationer för IOLITE-X-8xACC
- Tekniska specifikationer för IOLITE-X-8xLVe
- Tekniska specifikationer för IOLITE-X-16xLV
- Tekniska specifikationer för IOLITE-X-8xSTGS
Teknisk specifikation för IOLITE® X-systemet
| IOLITE X | |
|---|---|
| GLAN | |
| Data interface | Ethernet 1 GbE incl. IEEE1588v2 synchronization (PTP IEEE 802.3) (RJ45) |
| Data Rate | 1 Gbps |
| Sync Accuracy | 100 ns |
| Bus connectors | Ethernet RJ45, single cable for data, power and sync, daisy chainable |
| Power over Ethernet | 48 - 57 V DC (PoE++ power delivery) |
| Max. cable length between devices | 100 m |
| Max. Throughput per Chain | up to 90W |
| Internals | |
| CPU type | ARM |
| Operating system | Linux |
| Software | Dewesoft RT |
| Device protocols | openDAQ, OPC-UA |
| Power | |
| Power supply | 9 - 57 V DC |
| Power supply connector | SCDN-THR 3.81/04/90G 3.2SN BK BX |
| Environmental | |
| Operating Temperature | -40 to 70 °C |
| Storage Temperature | -40 to 85 °C |
| Humidity | 95 %, no condensation |
| IP rating | IP20 |
| Shock | Shock: SIST EN 60068-2-27:2009 10 g, 6 ms, half-sine 25x pos./neg in each axis 150x total |
| Vibration | Random: Profile breakpoints: 10 Hz - 0.75 g²/Hz 150 Hz - 0.015 g²/Hz Profile RMS / Peak = 3.5 g / 10.5 g 1 hrs in each axis, 3 hrs total |
| Physical | |
| Dimensions | 137 x 119* x 35 (* depending on the front connectors) |
| Rev: 1712304000 | |
Översikt över IOLITE® X-förstärkare
| X 8xLVe | X 16xLV | X 8xACC | X 8xSTGS | X 8xUNI | |
|---|---|---|---|---|---|
| Connectors | Terminal block, DSUB-37 | Terminal block | BNC | Terminal block, DSUB-37 | DSUB-37 |
| Channels per module | 8x | 16x | 8x | 8x | 8x |
| Data rate per channel | 200 kS/s | 100 kS/s | 200 kS/s | 50 kS/s | 200 kS/s |
| Resolution | 24-bit | 24-bit | 24-bit | 24-bit | 24-bit |
| Bandwidth | 0.433*fs | 0.433*fs | 0.433*fs | 0.433*fs | 0.433*fs |
| Voltage mode ranges | ±100 V, ±5 V | ±200 V, ±10 V | ±10 V, ±5 V, ±1 V, ±200 mV | ✗ | 100 V, 10 V, 1 V, 0.1 V |
| Input coupling | DC | DC | DC, AC 1 Hz, AC 0.1 Hz | DC | DC, AC 0.15 Hz |
| Sensor excitation | 0...24V (unipolar) | ✗ | 2 mA, 4 mA, 6 mA | 1 V, 2 V, 5 V | 0...24 V (unipolar or bipolar) 0...100 mA |
| Bridge connection | ✗ | ✗ | ✗ | Full, ½, ¼ 350 Ω, ¼ 120 Ω 3-wire, 4-wire (optional) | Full, ½, ¼ 350 Ω or ¼ 120 Ω (3-wire or 4-wire), ¼ CC (2-wire or 4-wire) |
| Programmable shunt | ✗ | ✗ | ✗ | 100 kΩ | 100 kΩ |
| IEPE input | ✗ | ✗ | ✓ | ✗ | ✓ |
| Resistance | ✗ | ✗ | ✗ | ✗ | ✓ |
| Temperature (PTx) | ✗ | ✗ | ✗ | ✗ | ✓ |
| Thermocouple | ✗ | ✗ | ✗ | ✗ | ✗ |
| Current | ✓ (ext shunt) (See 1) | ✗ | ✗ | ✗ | ✓ (ext. shunt or int. shunt) |
| Potentiometer | ✓ (See 1) | ✗ | ✗ | ✓ | ✓ |
| LVDT | ✗ | ✗ | ✗ | ✗ | ✗ |
| Charge | ✗ | ✗ | ✗ | ✗ | ✗ |
| TEDS | ✓ (See 1) | ✗ | ✓ | ✓ (only TB) | ✓ |
| Isolation voltage | 250 V | 250 V | 250V | Differential | 250V |
| Isolation arrangement | Ch-GND | Ch-GND | Ch-GND | Ch-GND | Ch-GND |
| PoE functionality | ✓ | ✓ | ✓ | ✓ | ✓ |
| Advanced functions | High isolation, high input range | High isolation, high input range | IEPE, supports TEDS, high channel density | Supports all strain types, low power consumption | High input range, supports all strain types, IEPE, supports TEDS, high channel density |
| Rev: 1768399200 | |||||
| 1) This functionality will be available with a firmware upgrade. | |||||
Tekniska specifikationer för IOLITE-X-8xACC
| Analog inputs | IOLITE X 8xACC | ||||
|---|---|---|---|---|---|
| Input type | Voltage, IEPE | ||||
| Number of channels | 8 | ||||
| ADC Type | 24-bit delta-sigma with anti-aliasing filter (-3 dB @ 160 kHz) Butterworth 2nd order | ||||
| Sampling Rate | Simultaneous 200 kS/sec per channel (software-selectable) | ||||
| Voltage Mode | |||||
| Voltage Ranges | ±10 V | ±5 V | ±1 V | ±0.2 V | |
| Input Accuracy | DC | ±0.02 % of reading ±0.02 % of range | |||
| Noise floor, Typ. | 10 kS/s / 100 kS/s / 200 kS/s | -116 dB / -107 dB / -105 dB | -116 dB / -107 dB / -105 dB | -115 dB / -105 dB / -103 dB | -105 dB / -95 dB / -93 dB |
| Dynamic Range, Typ. | 10 kS/s / 100 kS/s / 200 kS/s | -158 dB / -149 dB / -150 dB | -156 dB / -150 dB / -150 dB | -155 dB / -152 dB / -148 dB | -145 dB / -140 dB / -139 dB |
| CMR, Typ. 0 dBFS sine wave @ 50 Hz / 400 Hz / 1 kHz | 10 kS/s | 117 dB / 117 dB / 117 dB | 117 dB / 115 dB / 116 dB | 115 dB / 115 dB / 114 dB | 106 dB / 105 dB / 104 dB |
| 100 kS/s | 107 dB / 107 dB / 107 dB | 107 dB / 107 dB / 107 dB | 105 dB / 105 dB / 104 dB | 96 dB / 96 dB / 95 dB | |
| 200 kS/s | 106 dB / 106 dB / 106 dB | 106 dB / 106 dB / 106 dB | 103 dB / 103 dB / 102 dB | 93 dB / 93 dB / 93 dB | |
| THD, Typ. -1 dBFS sine wave @ 1 kHz | 10 kS/s / 100 kS/s / 200 kS/s | -105 dB / -103 dB / -99 dB | -104 dB / -102 dB / -98 dB | -103 dB / -102 dB / -98 dB | -101 dB / -101 dB / -99 dB |
| SFDR, Typ. -1 dBFS sine wave @ 1 kHz | 10 kS/s / 100 kS/s / 200 kS/s | 106 dBc / 106 dBc / 101 dBc | 106 dBc / 105 dBc / 101 dBc | 106 dBc / 105 dBc / 90 dBc | 98 dBc / 97 dBc / 90 dBc |
| SNR, Typ. -1 dBFS sine wave @ 1 kHz | 10 kS/s / 100 kS/s / 200 kS/s | 106 dB / 103 dB / 101 dB | 102 dB / 100 dB / 98 dB | 104 dB / 99 dB / 88 dB | 92 dB / 87 dB / 87 dB |
| Gain Linearity | < 0.02 % | ||||
| Gain Drift | Typical 6 ppm/K, max. 15 ppm/K | ||||
| Offset Drift | Typical 0.5 μV/K + 0.5 ppm of range/K, max 2 μV/K + 2 ppm of range/K | ||||
| Channel Cross talk typ. @ 1 kHz | -130 dB | -130 dB | -130 dB | -125 dB | |
| Input Coupling | DC, AC 0.1 Hz, 1 Hz | ||||
| Input Impedance | 1 MΩ | ||||
| Overvoltage Protection | In+ to In-: 50 V continuous, 200 V peak (10 msec) | ||||
| Analog input performance | |||||
| Sample rate | SR ≤ 2 kS/s | SR > 2 kS/s | |||
| Bandwidth (-3 dB) | 0.489*fs | 0.433*fs | |||
| Alias-free Bandwidth | DC to 0.44*fs | DC to 0.499*fs | |||
| Alias Rejection | -105 dB (all sample rates) | ||||
| Delay Through ADC | 34 / fs | ||||
| Oversampling | 128 | ||||
| IEPE input | |||||
| Excitation | 2 mA, 4 mA, 6 mA | ||||
| Excitation accuracy | 10% | ||||
| Compliance voltage | 24 V | ||||
| Output Impedance | >60 kΩ | ||||
| Sensor detection | Shortcut: <4 V; Open: >19 V | ||||
| Additional Specifications | |||||
| Modular | IOLITE X 8xACC | ||||
| Input connector | BNC | ||||
| Isolation voltage | 250 Vpeak channel to ground | ||||
| TEDs support | IEPE mode only (class 1) | ||||
| Power supply | 9 - 57 V DC, Power over Ethernet: 48 - 57 V DC (PoE++ power delivery) | ||||
| Power consumption | TB @Typ. 24 V / MAX. 56 V | Voltage mode: Typ. 5.88 W / Max. 7.4 W IEPE mode: Typ. 7.3 W @4 mA, 8.6 W @6 mA / Max. 7.9 W@4 mA, 9.3 W @6 mA | |||
| PoE @Min. 48 V / MAX. 56 V | Voltage mode: min. 7.2 W / Max. 7.6 W IEPE mode: min. 8.5 W @4 mA, 8.9 W @6 mA / Max. 9.2 W@4 mA, 9.5 W @6 mA | ||||
| Weight | 600 g | ||||
| Slice Dimensions | 137 x 115.0 x 35.0 mm | ||||
| Rev: 1712304000 | |||||
Tekniska specifikationer för IOLITE-X-8xLVe
| Inputs | IOLITE X 8xLVe | ||
|---|---|---|---|
| Input types | Voltage, Potentiometer (See 1), Current (Ext. shunt) (See 1) | ||
| Number of channels | 8 | ||
| ADC Type | 24-bit delta-sigma with anti-aliasing filter (-3 dB @ 160 kHz) Butterworth 2nd order | ||
| Sampling Rate | Simultaneous up to 200 kS/s | ||
| Voltage Mode | |||
| Ranges | SR | ±100 V | ±5 V |
| Accuracy | ±0.03 % of reading ±0.02 % of range | ||
| Noise floor, Typ. | 10kS/s/ 100kS/s / 200kS/s | -118 dB / -109 dB / -107 dB | -103 dB / -93 dB / -90 dB |
| Dynamic Range, Typ. | 10kS/s/ 100kS/s / 200kS/s | -149 dB / -149 dB / -149 dB | -133 dB / -133dB / -132 dB |
| CMR, Typ. 0 dBFS sine wave @ 50 Hz / 400 Hz / 1 kHz | 10kS/s | -113dB /-102dB /-99dB | -100dB /-98dB /-97dB |
| 100kS/s | -105dB /-100dB /-98dB | -90dB /-89dB /-89dB | |
| 200kS/s | -103dB /-100dB /-97dB | -87dB /-86dB /-86dB | |
| THD, Typ. -1 dBFS sine wave @ 1 kHz | 10kS/s/ 100kS/s / 200kS/s | -94 dB / -94 dB / -94 dB | -112 dB / -105 dB / -102 dB |
| SFDR, Typ. -1 dBFS sine wave @ 1 kHz | 10kS/s/ 100kS/s / 200kS/s | -104 dBc / -93 dBc/ -94 dBc | -109 dBc / -107 dBc/ -105 dBc |
| SNR, Typ. -1 dBFS sine wave @ 1 kHz | 10kS/s/ 100kS/s / 200kS/s | 107 dB / 102 dB / 100 dB | 98 dB / 88 dB / 85 dB |
| Gain Linearity | <0.02 % | <0.01 % | |
| Gain Drift | Typical 5 ppm/K, Max. 20 ppm/K | ||
| Offset Drift | Typical 5 ppm of range/K, Max. 10 ppm of range/K | ||
| Channel Crosstalk typ. @ 1 kHz | -131 | ||
| Input Coupling | DC | ||
| Input Impedance | 800 kΩ (between In+ and In-) | ||
| Input Overvoltage Protection | In+ to In-: 200 V continuous, 350 Vpeak (100 ms) | ||
| Max. common mode voltage | ±200 V | ||
| Isolation | 250 V functional isolation (channel to power supply ground) | ||
| Analog input performance | |||
| Sample rate | SR ≤ 2 kS/s | SR > 2 kS/s | |
| Bandwidth (-3 dB) | 0.489*fs | 0.433*fs | |
| Alias-free Bandwidth | DC to 0.44*fs | DC to 0.499*fs | |
| Alias Rejection | -105 dB (all sample rates) | ||
| Delay Through ADC | 34 / fs | ||
| Oversampling | 32 | ||
| Excitation Voltage | |||
| Excitation voltage | Unipolar 2 ... 24V DC | ||
| Current limit | 2.8 W max. power per channel, 22.4 W per slice | ||
| Excitation accuracy | 0.05 % ± 2 mV | ||
| Drift | ±20 ppm/K ± 60 μV/K | ||
| Stability 10 % to 90 % load | < 0.06 @ 5 V exc (< 0.01 @ 24 V exc) | ||
| Noise @ 10 V / 350 Ω | <150 μVrms @ 10 kS | ||
| Load regulation over 10 Ω of change | < 0.04 % @ 120 Ω load | ||
| Protection | Continuous short to ground | ||
| Additional Specifications | |||
| Modular | IOLITE X 8xLVe | ||
| Input connector | Terminal block | DSUB-37 | |
| TEDS support | Yes | ||
| Power supply | 9 - 57 V DC, Power over Ethernet: 48 - 57 V DC (PoE++ power delivery) | ||
| Power consumption | TB @Typ. 24 V / MAX. 56 V | Analog input only: Typ. 5.2 W/ MAX. 7.3 W Excitation: Typ 9.4 W 120 Ω load @ 5 V / 40.7 W 120 Ω load @ 20 V MAX: 11.5W 120 Ω load @ 5 V / 45.7 W 120 Ω load @ 20 V | |
| PoE @min 48 V / MAX. 56 V | Analog input only: min: 7.1W / MAX. 7.5 W Excitation min 11.4 W 120 Ω load @ 5 V / 45.2 W 120 Ω load @ 20 V MAX 11.8 W 120 Ω load @ 5 V / 46.4 W 120 Ω load @ 20 V | ||
| Weight | 615 g | 610 g | |
| Slice Dimensions | 137 x 115.0 x 35.0 mm | ||
| Rev: 1712304000 | |||
| 1) This functionality will be available with a firmware upgrade. | |||
Tekniska specifikationer för IOLITE-X-16xLV
| Analog input | IOLITE X 16xLV | ||
|---|---|---|---|
| Input type | Voltage | ||
| Number of channels | 16 | ||
| ADC Type | 24-bit delta-sigma with anti-aliasing filter (-3 dB @ 160 kHz) Butterworth 2nd order | ||
| Sampling Rates | Simultaneous up to 100 kS/s | ||
| Voltage mode | |||
| Voltage ranges | ±200 V | ±10 V | |
| Input Accuracy | DC | ±0.03 % of reading ±40 mV | ±0.03 % of reading ±2 mV |
| Noise floor, Typ. | 10 kS/s / 100 kS/s | -115dB / -106 dB | -102 dB / -95 dB |
| Dynamic Range | 10 kS/s / 100 kS/s | -154 dB / -146 dB | -144 dB / -138 dB |
| CMR, Typ. -1 dBFS on 10V and -6dB on 200V sine wave @ 50 Hz / 400 Hz / 1 kHz | 10 kS/s | -100dB /-100dB /-97dB | -100dB /-100dB /-100dB |
| 100 kS/s | -101dB /-101dB /-100dB | -95dB /-95dB /-94dB | |
| THD, Typ. -1 dBFS on 10V and -6dB on 200V sine wave @ 1 kHz | 10 kS/s / 100 kS/s | -93 dB / -93 dB | -106 dB / -102 dB |
| SFDR, Typ. -1 dBFS on 10V and -6dB on 200V sine wave @ 1 kHz | 10 kS/s / 100 kS/s | 95 dBc / 95 dBc | 107 dBc / 104 dBc |
| SNR Typ. -1 dBFS on 10V and -6dB on 200V sine wave @ 1 kHz | 10 kS/s / 100 kS/s | 94 dB / 94 dB | 107 dB / 104 dB |
| Gain Linearity | < 0.01 % | ||
| Gain Drift | Typical 10 ppm/K, Max. 40 ppm/K | ||
| Offset Drift | Typical 2 ppm of range/K, Max. 5 ppm of range/K | ||
| Crosstalk (0 dBFS @ 1 kHz) | -115 dB | -130 dB | |
| Input Coupling | DC | ||
| Input Impedance | 800 kΩ | ||
| Max. common mode voltage | ±200 V | ||
| Overvoltage Protection | In+ to In-: 200 V continuous, 350 Vpeak (100 ms) | ||
| Analog input performance | |||
| Sample rate | SR ≤ 2 kS/s | SR > 2 kS/s | |
| Bandwidth (-3 dB) | 0.489*fs | 0.433*fs | |
| Alias-free Bandwidth | DC to 0.44*fs | DC to 0.499*fs | |
| Alias Rejection | -105 dB (all sample rates) | ||
| Delay Through ADC | 34 / fs | ||
| Oversampling | 32 | ||
| Additional Specifications | |||
| Modular | IOLITE X 16xLV | ||
| Input Connectors | Terminal block 9 pole OMNIMATE SL 2.50 / BLF 2.50/180 | ||
| Power supply | 9 - 57 V DC, Power over Ethernet: 48 - 57 V DC (PoE++ power delivery) | ||
| Isolation Voltage | 250 V functional isolation (channel to power supply ground) | ||
| Power consumption | TB @Typ. 24 V / MAX. 56 V | Voltage mode: Typ. 5.8 W / Max. 7.4 W | |
| PoE @Min. 48 V / MAX. 56 V | Voltage mode: Typ. 7.2 W / Max. 7.8W | ||
| Weight | 1250 g | ||
| Slice Dimensions | 137 x 115.0 x 35.0 mm | ||
| Rev: 1712304000 | |||
Tekniska specifikationer för IOLITE-X-8xSTGS
| Analog inputs | IOLITE X 8xSTGS | |||
|---|---|---|---|---|
| Input type | Full / half / quarter bridge (3-wire, 4-wire), Potentiometer | |||
| Number of channels | 8 | |||
| ADC Type | 24-bit delta-sigma with anti-aliasing filter (-3 dB @ 160 kHz) Butterworth 2nd order | |||
| Sampling Rate | Simultaneous 50 kS/s per channel (software-selectable) | |||
| Analog input performance (see 1) | ||||
| Ranges | 1 V | 0.1 V | 0.02 V | |
| Gain accuracy | 0.02 % of reading | 0.02 % of reading | 0.02 % of reading | |
| Offset accuracy | 210 uV | 30 uV | 14 uV | |
| Offset Accuracy after Balance Amplifier | 21 uV | 3 uV | 1.4 uV | |
| Typical Noise floor @ 100 S/s / 1 kS/s / 10 kS/s / 20 kS/s / 50 kS/s | -117 dB /-114 dB /-109 dB /-107 dB /-104 dB | -116 dB /-110 dB /-101 dB /-98 dB /-95 dB | -108 dB /-99 dB /-89 dB /-86 dB /-83 dB | |
| Typical Dynamic Range @ 100 S/s / 1 kS/s / 10 kS/s / 20 kS/s / 50 kS/s | -136 dB /-139 dB /-141 dB /-142 dB /-144 dB | -132 dB /-133 dB /-134 dB /-134 dB /-135 dB | -122 dB /-121 dB /-122 dB /-122 dB /-122 dB | |
| Typ. Crosstalk(50kS/s) @ 1 kHz | -103 dBc | -94 dBc | -83 dBc | |
| Typ. CMR( 10kS/s) @ 50 Hz / 400 Hz / 1 kHz | -89dB /-85dB /-80dB | -99dB /-94dB /-89dB | -89dB /-88dB /-86dB | |
| Typ. CMR (50kS/s) @ 50 Hz / 400 Hz / 1 kHz | -88dB /-85dB /-80dB | -94dB /-91dB /-87dB | -82dB /-82dB /-81dB | |
| Gain Drift | Typical 10 ppm/K (max. 20 ppm/K) | |||
| Offset Drift | Typical 0.03 μV/K + 2.5 ppm of range/K, max 0.1 μV/K + 9 ppm of range/K | |||
| Gain Linearity | < 0.01 % | |||
| Input Coupling | DC | |||
| Overvoltage Protection | In+ to In-: 6 V continuous | |||
| Sampling rate | SR < kS/s | SR ≥ kS/s | ||
| Bandwidth (-3 dB) | 0.49*fs | 0.433*fs | ||
| Alias-free Bandwidth | DC to 0.44*fs | DC to 0.499*fs | ||
| Alias Rejection | -105 dB (all sample rates) | |||
| Delay Through ADC | 34 / fs | |||
| Oversampling | ||||
| Excitation Voltage | ||||
| Excitation Voltage | Unipolar: 1 V, 2 V, 5 V (see 2) | |||
| Excitation Accuracy | ±3 % of set ±50 mV | |||
| Sense Accuracy | ±0.02 % of reading ±0.25 mV | |||
| Sense Drift | Typical 10 μV/K + 10 ppm of reading/K, max 20 μV/K + 20 ppm of reading/K | |||
| Current Limit | 42 mA | |||
| Protection | Continuous short to ground | |||
| Bridge measurement | ||||
| Bridge Connection Types | full bridge strain, ½ bridge strain, ¼ bridge strain (3-wire/4-wire) | |||
| Ranges | 2 mV/V ... 1000 mV/V free programmable (software ranges) | |||
| Accuracy | Range \ Excitation | 1 V | 2 V | 5 V |
| 200 mV/V | ±0.035 % of reading ±210 μV/V | ±0.028 % of reading ±105 μV/V | ±0.025 % of reading ±42 μV/V | |
| 20 mV/V | ±0.027 % of reading ±14 μV/V | ±0.027 % of reading ±15 μV/V | ±0.024 % of reading ±6 μV/V | |
| 2 mV/V | ±0.027 % of reading ±14 μV/V | ±0.024 % of reading ±7 μV/V | ±0.022 % of reading ±2.8 μV/V | |
| Internal Bridge Completion | ¼ bridge 120 Ω and 350 Ω | |||
| Bridge Completion Accuracy | ±125 µV/V, TCR: 5 ppm/K (others on request) | |||
| Internal Shunt Resistor | 100 kΩ software selectable to SNS+ or SNS- and In+ or In- | |||
| Shunt Resistor Accuracy | 0.05 %; TCR: 10 ppm/K (others on request) | |||
| Input Short, Sensor Offset Adjust | Software-selectable | |||
| Internal switch configurations | Bridge type | Selectable connections | Internal SW on: | Additonal compensation |
| Full | 6 or 4 Wires | 4 wires SNS + and EXC + & SNS- and EXC - | Lead wire compensation available on 4 wire mode | |
| Half | 5 or 3 Wires | 3 wires SNS + and EXC + & SNS- and EXC - | Lead wire compensation available on 3 wire mode | |
| QB 3W | SNS + and EXC + & SNS- and EXC - | SNS + and EXC + & SNS- and EXC - | Lead wire compensation available | |
| QB 4W | SNS + and EXC + | SNS + and EXC + | ||
| Sensor current measurement (sooner) | ||||
| Bridge configuration | Full / Half | QB | ||
| Current measuring line | EXC+ line | R Line | ||
| Current limit | 50 mAdc | |||
| Resolution | 0.1 mAdc | |||
| Additional math caculus | Resistance, Power | |||
| Sample rate | 1 Hz | |||
| Additional Specifications | ||||
| Modular | IOLITE-X-8xSTGS | |||
| Input connectors | Terminal Block Weidmueller SL 2.50-04 | DSUB-37 | ||
| TEDS support | Available | Not available | ||
| Power supply | 9 - 60 V DC, PoE: 48-60 V DC (802.3bt Type4) | |||
| Power Consumption | Typ. 7.4 W; Max. 9.2W (120 Ω load @ 5 [V] EXC) | |||
| Weight | g | 590 g | ||
| Slice Dimensions | 136.75 x 115.0 x 35.0 mm | |||
| Rev: 1748858098, 2.6.2025 | ||||
| 1) Voltage ranges are describing the input for the bridge mode and are not supported as voltage mode. | ||||
| 2) Ratiometric method | ||||