SIRIUS® R1DB/R2DB/R8DB Effektanalysatorer Tekniska specifikationer
- Specifikationer för effektanalys
- Specifikationer för analys av elkvalitet
- Programvaruspecifikationer för effektanalysator
- Frekvens noggrannhet
- Specifikationer för SIRIUS® R1DB-systemet
- Specifikationer för SIRIUS® R2DB-systemet
- SIRIUS® R8DB systemspecifikationer
- SIRIUS® EtherCAT-specifikationer
- Specifikationer för SIRIUS® HS-filtrering (höghastighetsfiltrering)
- Specifikationer för SIRIUS® CNT (räknare)
- Specifikationer för SIRIUS® CAN-buss
- Översikt över SIRIUS® HS (High Speed) förstärkare
- Specifikationer för SIRIUS® HS-HV (v2) förstärkare
- Specifikationer för SIRIUS® HS-HV (v3) förstärkare
- Specifikationer för SIRIUS® HS-LV-förstärkare
- Specifikationer för SIRIUS® HS-ACC-förstärkare
- Specifikationer för SIRIUS® HS-CHG-förstärkare
- Specifikationer för SIRIUS® HS-STG-förstärkare
Specifikationer för effektanalys
| Functionality | Dewesoft Power Analyzer |
|---|---|
| Power Analysis for DC and AC | ✓ |
| Power Analysis P | P, Q, S, PF, cos phi, D (Distortion), DH (Harmonic distortion), QH (reactive power of harmonics) (for each phase and total) |
| Fundamental Power | P_H1, Q_H1, S_H1, cos phi_H1, phi_H1 (for each phase and total) |
| Voltage and Current | RMS, RM (star and delta) |
| Energy Calculation | Total, positive and negative (e.g. Recuperation) |
| Efficiency | ✓ |
| Wiring Schematics | DC, 1-phase, 2-phase, 3-phase delta, 3-phase star, 3-phase V, 3-phase Aron, 3-phase two meters, 6-phase (R2, R4, R8), 7-phase (R2, R4, R8, 12-phase (R4, R8)) |
| Star-Delta Calculation | ✓ (waveform and RMS values) |
| Frequencies | 16.7 Hz, 25 Hz, 50 Hz, 60 Hz, 400 Hz, 800 Hz, Variable from 10 Hz up to 3 kHz |
| Frequency Source | Voltage, current, external |
| Period Values | U, I, P, Q, S, symmetrical components for 1⁄2, 1, 2 or 4 periods and selectable Overlap up to 99 % |
| Power Averaging | Selectable - starting from 1 ms , Multiple Averaging (e.g. 20 ms, 60 s, 600 s) possible |
Specifikationer för analys av elkvalitet
| Functionality | Dewesoft Power Analyzer |
|---|---|
| Harmonics (according to IEC61000-4-7) | up to 150 kHz for voltage, current, active-, reactive power, phase angle and impedance |
| Variable Sidebands and Half Sidebands (according to IEC61000-4-7) | ✓ |
| Harmonic Smoothing Filter (according to IEC61000-4-7) | ✓ |
| Interharmonics (according to IEC61000-4-7) | ✓ |
| Total Harmonic Distortion (THD) (according to IEC61000-4-7) | Voltage and current (Total, odd and even) - selectable up to 150 kHz |
| Total Interharmonic Distortion (TIHD) and K-factor (according to IEC61000-4-7) | Voltage and current (Total, odd and even) - selectable up to 150 kHz |
| Higher Frequencies (according to IEC61000-4-7) | up to 150 kHz (grouping in 200 Hz and 2 kHz bands) |
| Flicker (according to IEC61000-4-15) | selectable PST and PLT |
| Flicker Emission (according to IEC61400-21) | ✓ |
| Rapid Voltage Changes (according to IEC61000-4-15) | selectable steady state and hysteresis |
| Symmetrical Components (according to IEC61000-4-30) | Zero-, positive- & negative system for voltage and current (absolute or relative to fundamental) |
| Additional Symmetrical Components (according to IEC61400-21) | Active and reactive parts for zero-, positive- & negative system |
Programvaruspecifikationer för effektanalysator
| Software specifications | |
|---|---|
| Functionality | Dewesoft Power Analyzer |
| Power Analysis | ✓ |
| Power Quality Analysis | ✓ |
| Database Storing | ✓ |
| Post Processing | ✓ |
| Math Library | ✓ |
| Data logging - Raw data storing | ✓ (data Storing at Full Sampling rate up to 15 MS/s per channel) |
| Scope | ✓ (up to 8 graphs in one diagram, Zoom In- and Out) |
| Vector Scope | ✓ (1-, 2-, 3-phase systems, Clarke transform, Park transform) |
| FFT | ✓ (up to 1⁄2 of Sampling Rate) |
| Harmonic FFT | ✓ (up to 1⁄4 of Sampling Rate) |
| Transient Recording | ✓ (up to 15 MS/s) |
| Triggering Channels | Analog, Digital, Counter, Math, Power, etc. |
| Triggering options | Simple edge (rising, falling), Window (two-levels: entering, leaving), Pulsewidth |
| (longer or shorter than duration), Window and Pulsewidth, Slope Trigger (rising or | |
| falling slope with steepness) | |
| Motor Efficiency Analysis | ✓ (available as an upgrade) |
| Efficiency mapping | ✓ |
Frekvens noggrannhet
| Line frequency | Accuracy |
|---|---|
| 16.67 ... 60 Hz | 0.0005 % of reading |
| 400 Hz | 0.01 % of reading |
| 800 Hz | 0.02 % of reading |
| Variable | 0.05 % of reading |
| Condition: SR > 50 * fin | |
Specifikationer för SIRIUS® R1DB-systemet
| Computer | |
|---|---|
| Processor | Intel® Core™ i3; 2x 2.3 GHz base; 4 threads (optioanl Intel® Core™ i7; 2x 2.6 GHz base, 3.4 GHz max; 4 threads) |
| Memory | 8 GB (optional up to 32 GB) |
| Storage | Non-removable M2 500GB (1 TB as option) |
| Interfaces and options | |
| USB Front | 4x USB 3.0 |
| Ethernet | 2x GLAN (RJ45, option: Lemo 1T) 2x front, 1x WLAN (RP-SMA Female Jack) |
| EtherCAT® | 1x EtherCAT® 100 Mbps Full Duplex, 8-pin LEMO female |
| Synchronisation | 2x SIRIUS® SYNC |
| Video | 1x HDMI |
| GPS (option) | 10 Hz or 100 Hz or 100 Hz + RTK |
| GPS display (option) | External on DSUB-9 female connector + remote power on |
| Display | |
| Type | TFT 12.1'' |
| Resolution | WXGA, 1280 x 800 pixels @ 60Hz |
| Active display Area | 261.1 x 163.2 mm |
| Luminance | 1200 cd/m² |
| Contrast Ratio | 1000:1 (typ.) |
| Viewing Angle (CR>=10) | -89 ~ +89 (H); -89 ~ +89 (V) |
| Synchronization Range Horizontal / Vertical | 30 ~ 83 kHz / 45 ~ 75Hz |
| Batteries | |
| Battery type | RRC2040-2 |
| Number of batteries | 2, hot swappable |
| Voltage | 11.25 V (at fully charged state 13.05 V) |
| Total capacity of single battery | 6.4 Ah |
| Discharge current of single battery | 6.5 A |
| Wrong polarity protection | YES |
| Weight of single battery | 0.34 kg |
| Power | |
| Power Supply | 12 - 36 V, tolerated 9 V voltage dips |
| Power Consumption | Display: 10 W Computer: 20 W |
| Power out | |
| Type | Switched input supply on 2-pin LEMO female |
| Maximum power | 40 W |
| Output Voltage | 11 - 13 V without external supply, 24 V with external supply |
| EtherCAT® Power out | |
| Type | Switched input supply on EtherCAT® connector, 8-pin LEMO female |
| Maximum power | 40 W |
| Output Voltage | 11 - 13 V without external supply, 24 V with external supply |
| Environmental | |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 60 °C |
| Humidity | 5 to 95 % RH non condensing @ 40 °C |
| IP rating | IP20 |
| Shock & Vibration | Vibration sweep sinus (EN 60068-2-6:2008) Vibration random (EN 60721-3-2: 1997 - Class 2M2) Shock (EN 60068-2-27:2009) MIL-STD-810D |
| Physical | |
| Dimensions | 331 x 224 x 145 mm |
| Weight | 6.4 kg (excl. SIRIUS® slices) 8.0 kg (std. system, with batteries) |
| Rev: 1761121370 | |
Specifikationer för SIRIUS® R2DB-systemet
| Computer | |
|---|---|
| Processor | Intel® Core™ i3; 2x 2.3 GHz base; 4 threads (optioanl Intel® Core™ i7; 2x 2.6 GHz base, 3.4 GHz max; 4 threads) |
| Memory | 8 GB (optional up to 32 GB) |
| Storage | Non-removable M2 500GB (1 TB as option) |
| Interfaces and options | |
| USB Front | 4x USB 3.0 |
| Ethernet | 2x GLAN (RJ45, option: Lemo 1T) 2x front, 1x WLAN (RP-SMA Female Jack) |
| EtherCAT® | 1x EtherCAT® 100 Mbps Full Duplex, 8-pin LEMO female |
| Synchronisation | 2x SIRIUS® SYNC |
| Video | 1x HDMI |
| GPS (option) | 10 Hz or 100 Hz or 100 Hz + RTK |
| GPS display (option) | External on DSUB-9 female connector + remote power on |
| Display | |
| Type | TFT 12.1'' |
| Resolution | WXGA, 1280 x 800 pixels @ 60Hz |
| Active display Area | 261.1 x 163.2 mm |
| Luminance | 1200 cd/m² |
| Contrast Ratio | 1000:1 (typ.) |
| Viewing Angle (CR>=10) | -89 ~ +89 (H); -89 ~ +89 (V) |
| Synchronization Range Horizontal / Vertical | 30 ~ 83 kHz / 45 ~ 75Hz |
| Batteries | |
| Battery type | NL2024HD |
| Number of batteries | 2, hot swappable |
| Voltage | 14.4 V (at fully charged state 16.8 V) |
| Total capacity of single battery | 6.25 Ah |
| Discharge current of single battery | 8 A |
| Wrong polarity protection | YES |
| Weight of single battery | 0.65 kg |
| Power | |
| Power Supply | 12 - 36 V, tolerated 9 V voltage dips |
| Charging power | 55 - 65 W total |
| Power Consumption | Display: 10 W Computer: 20 W |
| Power out | |
| Type | Switched input supply on 2-pin LEMO female |
| Maximum power | 60 W |
| Output Voltage | 13 - 16 V without external supply, 24 V with external supply |
| EtherCAT® Power out | |
| Type | Switched input supply on EtherCAT® connector, 8-pin LEMO female |
| Maximum power | 40 W |
| Output Voltage | 13 - 16 V without external supply, 24 V with external supply |
| Environmental | |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 60 °C |
| Humidity | 5 to 95 % RH non-condensing at 40 °C |
| IP rating | IP20 |
| Shock & Vibration | Vibration sweep sinus (EN 60068-2-6:2008) Vibration random (EN 60721-3-2: 1997 - Class 2M2) Shock (EN 60068-2-27:2009) MIL-STD-810D |
| Physical | |
| Dimensions | 332 x 225 x 194 mm |
| Weight | 7.8 kg (excl. SIRIUS® slices) 11 kg (std. system, with batteries) |
| Rev: 1761121370 | |
SIRIUS® R8DB systemspecifikationer
| R8DB | |
|---|---|
| Computer | |
| Processor | Intel® Core™ i5 (I5-1145G7E) 4x 1.5 GHz base, 4.1 GHz max 8 threads |
| Memory | 8 GB (optional up to 32 GB) |
| Storage | 500 GB removable SATA SSD Option: up to 4 TB removable SATA SSD Option: up to 1 TB NVMe internal SSD |
| Interfaces and options | |
| USB | Front: 3x USB 3.0, 1x USB 2.0 Rear: 4x USB 3.0 |
| Ethernet | Standard: 2x GLAN (RJ45) Optional: 1x GLAN (RJ45), 1x WLAN (RP-SMA Female Jack) |
| EtherCAT® | 1x EtherCAT® 100 Mbps Full Duplex, 8-pin LEMO female |
| Power out | Switched input supply on 2-pin LEMO female, 8 A (shared with EtherCAT® connector) |
| Synchronization | 2x SIRIUS® SYNC |
| Video | 1x DVI-I (VGA and HDMI compatible) |
| GPS (option) | 10 Hz or 100 Hz or 100 Hz + RTK |
| GPS display (option) | External on DSUB-9 female connector + remote power on |
| Analog out option | ✗ |
| EtherCAT® slave port | ✗ |
| Display | |
| Type | 17'', Full-HD, Multi-touch display |
| Resolution | 1920 x 1080 |
| Brightness | 400 cd/m² |
| Batteries | |
| Battery type | NL2024HD |
| Number of batteries | 4, hot swappable |
| Voltage | 14.4 V (at fully charged state 16.8 V) |
| Total capacity of single battery | 6.25 Ah |
| Discharge current of single battery | 8 A |
| Wrong polarity protection | YES |
| Battery weight | 0.65 kg |
| Power | |
| Power supply | 18 - 24 V DC |
| Power consumption | Typ. 45 W (Max. 73 W) (excl. SIRIUS® slices) |
| Charging power | 60 W |
| Environmental | |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 60 °C |
| Humidity | 5 to 95 % RH non-condensing at 50 °C |
| IP rating | IP20 |
| Shock & Vibration | Vibration sweep sinus (EN 60068-2-6:2008) Vibration random (EN 60721-3-2: 1997 - Class 2M2) Shock (EN 60068-2-27:2009) MIL-STD-810D |
| Physical | |
| Dimensions | 446 x 317 x 205 mm |
| Weight | 11.9 kg incl. 4 batteries (excl. SIRIUS® slices) |
| Rev: 1722513600 | |
SIRIUS® EtherCAT-specifikationer
| Interface | |
|---|---|
| Data interface | EtherCAT® |
| Data Rate | 100 Mbps Full Duplex bus speed |
| Max. Sample Rate | DualCore: 20 kS/s, HD 10 kS/s, HS 40 kS/s |
| Max. Throughput per Chain | From 6 MB/s to 10 MB/s |
| Sync Accuracy | below 1 sample to Sirius® |
| EtherCAT® | Max. Cable Length 100 m |
| Max. Number of Units | 64 or more (power injectors may be required) |
| Data Interface Connection | LEMO 1T EtherCAT® hybrid cable Single cable for data, power and sync, daisy chainable |
| Power Supply via EtherCAT | 9 - 36 V DC |
| Rev: 1593507600 | |
Specifikationer för SIRIUS® HS-filtrering (höghastighetsfiltrering)
| ADC | |
|---|---|
| Type | 16-bit SAR |
| Sampling Rate | Simultaneous 1 MS/sec |
| Analog anti alias filter | Bypass or analog 100 kHz 5th order Bessel |
| Digital low pass filter (software selectable) | |
| Digital filter Characteristic | Bypass, Butterworth or Bessel |
| Filter Order | 2nd , 4th, 6th or 8th |
| Ratio Sample rate to Filter Freq. | From 2 to 100 |
| Topology | Cascaded IIR Filter (up to 4 sections) |
Specifikationer för SIRIUS® CNT (räknare)
| Counter | |
|---|---|
| Modes | Counting, waveform timing, encoder, tacho, geartooth sensor |
| Inputs | 3 Digital inputs (individual A, B, Z input) |
| Outputs | 1 Digital output (Alarm; Open collector, max. 100 mA / 30 V) |
| Counter timebase | 102.4 MHz |
| Time base accuracy | Typical: 5 ppm, Max: 20 ppm |
| Max. Bandwidth | 10 MHz |
| Input Filter | 500 ns, 1 μs, 2 μs, 4 μs, 5 μs and 7.5 μs |
| Counter resolution | 32-bit |
| Input Compatibility, Level | TTL/CMOS (Low: <0.8 V, High >2 V) |
| Input termination, impedance | 100 kΩ pull-up to +3.3 V |
| Input Protection | ±25 V continuous |
| Sensor supply | 5 V / 100 mA; 12 V / 50 mA |
| Rev: 1738156469 | |
Specifikationer för SIRIUS® CAN-buss
| CAN bus | |
|---|---|
| Number of ports | 1 |
| Interface type | CAN 2.0B, up to 1 MBit/s CAN-FD, up to 8 Mbit/s (See 1) |
| Special applications | CCP, OBDII, J1939, CAN output |
| Galvanic isolation | Isolated (only on isolated motherboard) |
| Bus pin fault protection | ±36 V |
| ESD protection | 8 kV |
| 1) CAN-FD is available for SIRIUS DualCore and SIRIUS HD modular slices by default if ordered after November 2023. | |
Översikt över SIRIUS® HS (High Speed) förstärkare
| HS-HV | HS-LV | HS-ACC | HS-CHG | HS-STG | |
|---|---|---|---|---|---|
| Connectors | BANANA | DSUB-9, BNC, BANANA | BNC | BNC, TNC | DSUB-9 |
| Counter version | ✗ | ✓ | ✓ | ✓ | ✓ |
| Isolated version | ✓ | ✓ | ✓ | ✓ | ✓ |
| Differential version | ✗ | ✓ | ✓ | ✓ | ✓ |
| EtherCAT version | ✓ | ✓ | ✓ | ✗ | ✓ |
| Rack version | ✓ | ✓ | ✓ | ✓ | ✓ |
| Fanless version | ✓ | ✓ (see 1) | ✗ | ✗ | ✗ |
| Channels per slice | 8 | 8 | 8 | 8 | 8 |
| Data rate / channel | 1 MS/s | 1 MS/s | 1 MS/s | 1 MS/s | 1 MS/s |
| Resolution | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| Bandwidth | 2 MHz | 1 MHz | 500 kHz | 500 kHz | 1 MHz |
| Voltage ranges | ±2000 V … ±20 V | ±100 V … ±50 mV | ±10 V … ±200 mV | ±10 V … ±100 mV | ±50 V … ±20 mV |
| Input coupling | DC | DC, AC 1 Hz (3, 10 Hz SW) | DC, AC 1 Hz (3, 10 Hz SW) | DC, AC 0.1 Hz, 1 Hz, 10 Hz, 100 Hz | DC, AC 1 Hz (3, 10 Hz SW) |
| Sensor excitation | ✗ | 2…30 V bipolar, 0…24 V unipolar, max. 0.2 A / 2 W | IEPE 4 mA, 8 mA | IEPE 4, 8, 12 mA | 0…20 V max. 0.8 W, 0..60 mA max 0.5 W |
| Bridge connection | ✗ | Full | ✗ | ✗ | Full, ½, ¼ 350 Ω, ¼ 120 Ω, 3 or 4 wire |
| Programmable shunt | ✗ | ✗ | ✗ | ✗ | 59.88 kΩ, 175 kΩ bipolar |
| IEPE input | ✗ | DSI-ACC | ✓ | ✓ | DSI-ACC |
| Resistance | ✗ | ✗ | ✗ | ✗ | ✓ |
| Temperature (PTx) | ✗ | DSI-RTD | ✗ | ✗ | ✓ |
| Thermocouple | ✗ | DSI-TH | ✗ | ✗ | DSI-TH |
| Potentiometer | ✗ | ✗ | ✗ | ✗ | ✓ |
| LVDT | ✗ | DSI-LVDT | ✗ | ✗ | DSI-LVDT |
| Charge | ✗ | DSI-CHG | ✗ | 1 k …100 k pC | DSI-CHG |
| Current | ✗ | ext. shunt, DSI | ext. shunt | ext. shunt | ext. shunt, DSI |
| TEDS | ✗ | ✓ | ✓ | ✓ | ✓ |
| Isolation voltage | CAT II 1000 V | 1000 V | 1000 V | 1000 V | 1000 V |
| Power consumption per channel | 1 W/ch | 1.2 W/ch | 2 W/ch | 1.2 W/ch | 2 W/ch |
| Advanced functions | High voltage, high bandwidth, high isolation | High sensor power and multi range | Sensor error detection, high speed | Sensor error detection in IEPE and CHG mode (injection) | High speed, supports all strain types and high input range |
| (1) Fanless operation only for BNC or Banana version (without excitation) | |||||
Specifikationer för SIRIUS® HS-HV (v2) förstärkare
| Inputs | ||||
|---|---|---|---|---|
| Input types | Voltage | |||
| ADC Type | 16-bit SAR | |||
| Sampling Rate | Simultaneous 1 MS/s | |||
| Filtering | See "HS general specifications" | |||
| Analog bandwidth | 2 MHz | |||
| Voltage Mode | ||||
| Ranges | ±1600 V, ±800 V, ±400 V, ±200 V, ±100 V, ±50 V, ±20 V | |||
| Input Accuracy (see 1) | Signal frequency | Accuracy | ||
| DC | ±0.03 % of reading ±0.02 % of range ±0.04 V | |||
| Up to 1 kHz | ±0.03 % of reading ±0.02 % of range | |||
| Up to 10 kHz | ±0.1 % of reading ±0.05 % of range | |||
| Up to 100 kHz | ±2 % of reading ±0.1 % of range | |||
| Up to 1000 kHz | ±5 % of reading ±0.5 % of range | |||
| Typ. Noise floor | Sample rate/Range → | 1600 V | 400 V | 100 V |
| 1 MS/s | -83 dB | -79 dB | -71 dB | |
| 200 kS/s | -85 dB | -85 dB | -82 dB | |
| 20 kS/s | -100 dB | -97 dB | -90 dB | |
| Typ. CMR @ 50 Hz / 1 kHz / 10 kHz | 85 dB / 75 dB / 50 dB | |||
| Gain Drift | Typical 25 ppm/K, max. 50 ppm/K | |||
| Offset Drift | Typical 1 mV/K + 10 ppm of range/K, max 2 mV/K + 15 ppm of range/K | |||
| Gain Linearity | <0.02 % | |||
| Channel Cross talk | -115 dB @ 50 Hz; -90 dB @ 1 kHz | |||
| Input Coupling | DC | |||
| Input Impedance | 10 MΩ | 2 pF | |||
| Overvoltage category | CAT II 1000 V | |||
| Maximum input voltage | 2000 Vdc or 2000 Vpk (1414 Vacrms) | |||
| Additional Specifications | ||||
| Input connector | Banana | |||
| TEDS support | NA | |||
| 1) 50 V Range (1.2 MHz) and 20 V range (700 kHz) have limited bandwidth | ||||
| Rev: 1671188100 | ||||
Specifikationer för SIRIUS® HS-HV (v3) förstärkare
| Inputs | ||||
|---|---|---|---|---|
| Input types | Voltage | |||
| ADC Type | 16-bit SAR | |||
| Sampling Rate | Simultaneous 1 MS/s | |||
| Filtering | See "HS general specifications" | |||
| Analog bandwidth | 2 MHz (1.5 MHz for 50 V range, 800 kHz for 20 V range) | |||
| Voltage Mode | ||||
| Ranges | ±2000 V, ±1000 V, ±400 V, ±200 V, ±100 V, ±50 V, ±20 V | |||
| Input Accuracy | Signal frequency | Accuracy | ||
| DC | ±0.03 % of reading ±0.02 % of range ±0.04 V | |||
| Up to 1 kHz | ±0.03 % of reading ±0.02 % of range | |||
| Up to 10 kHz | ±0.1 % of reading ±0.05 % of range | |||
| Up to 100 kHz | ±2 % of reading ±0.1 % of range | |||
| Up to 1000 kHz | ±5 % of reading ±0.5 % of range | |||
| Typ. Noise floor | Sample rate/Range → | 2000 V | 400 V | 100 V |
| 1 MS/s | -84 dB | -80 dB | -71 dB | |
| 200 kS/s | -86 dB | -85 dB | -83 dB | |
| 20 kS/s | -100 dB | -96 dB | -91 dB | |
| Typ. CMR @ 50 Hz / 1 kHz / 10 kHz | 95 dB / 75 dB / 55 dB | |||
| Gain Drift | Typical 25 ppm/K, max. 50 ppm/K | |||
| Offset Drift | Typical 1 mV/K + 10 ppm of range/K, max 2 mV/K + 15 ppm of range/K | |||
| Gain Linearity | <0.02 % | |||
| Channel Cross talk | -115 dB @ 50 Hz; -90 dB @ 1 kHz | |||
| Input Coupling | DC | |||
| Input Impedance | 10 MΩ | 2 pF | |||
| Overvoltage category | CAT II 1000 V | |||
| Maximum input voltage | 2000 Vdc or 2000 Vpk (1414 Vacrms) | |||
| Additional Specifications | ||||
| Input connector | Banana | |||
| TEDS support | NA | |||
| Rev: 1698322800 | ||||
Specifikationer för SIRIUS® HS-LV-förstärkare
| Inputs | |||||
|---|---|---|---|---|---|
| Input types | Voltage Full bridge strain Current (ext. Shunt) | ||||
| ADC Type | 16-bit SAR | ||||
| Sampling Rate | Simultaneous 1 MS/s | ||||
| Filtering | See "HS general specifications" | ||||
| Analog bandwidth | 1 MHz (800 kHz for ranges ≤0.2 V) | ||||
| Voltage Mode | |||||
| Ranges | ±100, 50, 20, 10, 5, 2, 1, 0.5, 0.2, 0.1 and 0.05 Volt | ||||
| Input Accuracy | Signal frequency | Accuracy | |||
| DC | ±0.03 % of reading ±0.02 % of range ±100 μV (2 mV for Ranges ≥10 Volt) | ||||
| Up to 1 kHz | ±0.03 % of reading ±0.02 % of range | ||||
| Up to 10 kHz | ±0.1 % of reading ±0.05 % of range | ||||
| Up to 100 kHz | ±2 % of reading ±0.1 % of range | ||||
| Up to 1000 kHz | ±5 % of reading ±0.5 % of range | ||||
| Offset accuracy after Balance Amplifier | Range <10 V: ±0.002 % of range ±3 μV; Range ≥10 V: ±0.005 % of range | ||||
| Typ. Noise floor | Sample rate/Range → | 100 V | 5 V | 0.5 V | 0.05 V |
| 1 MS/s | -85 dB | -86 dB | -78 dB | -59 dB | |
| 200 kS/s | -88 dB | -88 dB | -87 dB | -76 dB | |
| 20 kS/s | <-100 dB | <-100 dB | -95 dB | -86 dB | |
| Typical CMR | Bandwidth/Range → | 100 V | 5 V | 0.5 V | 0.05 V |
| 50 Hz | 70 dB | 88 dB | 102 dB | 102 dB | |
| 400 Hz | 70 dB | 86 dB | 100 dB | 100 dB | |
| 10 kHz | 55 dB | 70 dB | 80 dB | 80 dB | |
| Gain Drift | Typical 10 ppm/K, max. 30 ppm/K | ||||
| Offset Drift | Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K | ||||
| Gain Linearity | <0.02 % | ||||
| Inter channel phase mismatch | 0.02° * fin [kHz] + 0.1° (5 V Range) | ||||
| Channel Cross talk Range | <10 V: -120 dB @ 10 kHz; Range ≥10 V: -95 dB @ 10 kHz | ||||
| Input Coupling (see 1) | DC, AC 1 Hz (3 Hz, 10 Hz per SW) | ||||
| Input Impedance | Range <10 V: 10 MΩ; Range ≥10 V: 1 MΩ | 110 pF between INx to GND | ||||
| Max. Common Mode Voltage | Isolated version: ±500 V | ||||
| Differential version: Ranges ≥10 Volt: ±100 V; all other Ranges: ±12 V | |||||
| Overvoltage Protection | <10 V: 100 V (200 V peak for 10 msec); Range ≥10 V: 300 V cont. | ||||
| Excitation Voltage | |||||
| Excitation Voltage | Unipolar or Bipolar Software selectable Free programmable (16-bit DAC) | ||||
| Excitation Level | unipolar 0…24 Volt; Predefined levels: 1, 2.5, 5, 10, 12, 15, 20 and 24 VDC | ||||
| Excitation Level | bipolar 2…30 Volt; Predefined levels: 2.5, 5, 10, 12, 15, 24 and 30 VDC | ||||
| Accuracy | ±0.1 % ±5 mV | ||||
| Drift | ±50 ppm/K ±100 μV/K | ||||
| Stability 10 % to 90 % load (bipolar) | <0.01 % | ||||
| Current limit | 200 mA (2 Watt max. per Channel, 12 Watt max. per Slice) | ||||
| Protection | Continuous short to ground | ||||
| Input short, Sensor offset adjust | Software selectable | ||||
| Counters (only on HS-LV+ type) | |||||
| Inputs | 1 digital counter input 3 digital inputs Fully synchronised with analog data | ||||
| Counter modes | counting, waveform timing, encoder, tacho, gear tooth sensor | ||||
| General Counter Specifications | See "SIRIUS counter specification" | ||||
| Additional Specifications | |||||
| Input connector | DSUB-9, Banana, BNC (others on request) | ||||
| TEDS support | Standard + DSI® adapters | ||||
| Rev: 1593504000 | |||||
| 1) In- must be within ±10 V referred to GND (iso); for Ranges ≥10 V the DC value of In- is not rejected | |||||
Specifikationer för SIRIUS® HS-ACC-förstärkare
| Inputs | ||||
|---|---|---|---|---|
| Input types | Voltage IEPE | |||
| ADC Type | 16-bit SAR | |||
| Sampling Rate | Simultaneous 1 MS/s | |||
| Filtering | See "HS general specifications" | |||
| Analog bandwidth | 500 kHz | |||
| Voltage Mode | ||||
| Ranges | ±10 Volt | ±5 Volt | ±1 Volt | ±0.2 Volt |
| Input Accuracy | ±0.05 % of reading | |||
| Offset Accuracy | ±2 mV | ±1 mV | ±0.2 mV | ±0.1 mV |
| Typ. Noise floor @ 100 kS/s | -89 dB | -89 dB | -86 dB | -83 dB |
| Typ. CMR @ 50 Hz / 400 Hz / 1 kHz | 120 / 96 / 88 dB | 126 / 100 / 92 dB | 140 / 110 / 102 dB | 140 / 118 / 110 dB |
| Gain Drift | Typical 10 ppm/K, max. 30 ppm/K | |||
| Offset Drift | Typical 0.5 μV/K + 10 ppm of range/K, max 3 μV/K + 20 ppm of range/K | |||
| Gain Linearity | <0.02 % | |||
| Inter Channel Phase-mismatch | 0.02° * fin [kHz] + 0.1° | |||
| Channel Cross talk | -83 dB | |||
| Input Coupling | DC or AC (1 Hz) | |||
| Input Impedance | 1 MΩ | |||
| Overvoltage Protection | 50 V continuous; 200 V peak (10 msec) | |||
| IEPE mode | ||||
| Excitation | 4 or 8 mA | |||
| Compliance voltage | 25 Volt | |||
| Output Impedance | >100 kΩ | |||
| Sensor detection | Shortcut: <4 Volt; Open: >19 Volt | |||
| Counters (HS-ACC+ type only) | ||||
| Inputs | 1 digital counter input 3 digital inputs Fully synchronised with analog data | |||
| Counter Modes | counting, waveform timing, encoder, tacho, gear-tooth sensor | |||
| General Counter Specifications | See "SIRIUS counter specification" | |||
| Additional Specifications | ||||
| Input connector | BNC | |||
| TEDS support | IEPE mode only | |||
| Rev: 1593385200 | ||||
Specifikationer för SIRIUS® HS-CHG-förstärkare
| Inputs | |||||
|---|---|---|---|---|---|
| Input types | Voltage IEPE Charge | ||||
| ADC Type | 16-bit SAR | ||||
| Sampling Rate | Simultaneous 1 MS/s | ||||
| Filtering | See "HS general specifications" | ||||
| Analog bandwidth (see 1) | 500 kHz | ||||
| Voltage Mode | |||||
| Ranges | ±10, ±5, ±2, ±1, ±0.5, ±0.2, ±0.1 Volt | ||||
| Input Accuracy | Signal frequency | Accuracy | |||
| DC | ±0.05 % of reading ±0.02 % of range ±50 μV | ||||
| up to 10kHz | ±0.1 % of reading ±0.05 % of range | ||||
| up to 100kHz | ±2 % of reading ±0.1 % of range | ||||
| Typ. Noise floor | Sample rate/Range → | 10 V | 5 V | 1 V | 0.1 V |
| 1 MS/s | -88 dB | -87 dB | -85 dB | -68 dB | |
| 200 kS/s | -89 dB | -89 dB | -88 dB | -83 dB | |
| 20 kS/s | <-100 dB | <-100 dB | <-100 dB | -92 dB | |
| Typical CMR | 50 Hz / 1 kHz | >140 / 120 dB | >140 / 124 dB | >140 / 126 dB | >140 / 126 dB |
| Gain Drift | Typical 10 ppm/K, max. 30 ppm/K | ||||
| Offset Drift | Typical 0.5 μV/K + 10 ppm of range/K, max 3 μV/K + 20 ppm of range/K | ||||
| Gain Linearity | <0.02 % | ||||
| Inter Channel Phase-mismatch | 0.02° * fin [kHz] + 0.1° | ||||
| Channel Cross talk | -110 dB @ 1 kHz; -90 dB @ 10 kHz | ||||
| Input Coupling | DC or AC (0.1 Hz, 1 Hz, 10 Hz or 100 Hz) | ||||
| Input Impedance | 1 MΩ / 100 pF | ||||
| Overvoltage Protection | 50 V continuous; 200 V peak (10 msec) | ||||
| IEPE mode | |||||
| Excitation | 4 or 8 mA | ||||
| Compliance voltage | 25 Volt | ||||
| Output Impedance | >100 kΩ | ||||
| Sensor detection | Shortcut: <4 Volt; Open: >19 Volt | ||||
| Charge mode | |||||
| Charge ranges | ±100 000, 50 000, 20 000, 10 000, 5000, 2000, 1000 pC | ||||
| Input Accuracy | ±0.5 % of reading ±0.05 % of range ±2 pC | ||||
| Offset Accuracy (See 2) | ±2 pC | ||||
| Input Coupling | 0.01 Hz, 0.03 Hz, 0.1 Hz, 0.5 Hz, 1 Hz, 10 Hz or 100 Hz | ||||
| Counters (only on HS-CHG+ type) | |||||
| Inputs | 1 digital counter input 3 digital inputs Fully synchronised with analog data | ||||
| Counter Modes | counting, waveform timing, encoder, tacho, gear-tooth sensor | ||||
| General Counter Specifications | See "SIRIUS counter specification" | ||||
| Additional Specifications | |||||
| Input connector | BNC (others on request) | ||||
| TEDS support | IEPE mode only | ||||
| 1) 200 kHz for Charge ranges 2) Offset Accuracy taken into account with Input Coupling <= 0.1 Hz, for others it is negligible. | |||||
| Rev: 1593385200 | |||||
Specifikationer för SIRIUS® HS-STG-förstärkare
| Inputs | |||||
|---|---|---|---|---|---|
| Input types | Voltage Full/Half/Quarter bridge strain (120 Ω and 350 Ω) Potentiometer, RTD, Resistance Current (ext. Shunt) | ||||
| ADC Type | 16-bit SAR | ||||
| Sampling Rate | Simultaneous 1 MS/s | ||||
| Filtering | See "HS general specifications" | ||||
| Analog bandwidth | 1 MHz (800 kHz for ranges ≤0.2 V) | ||||
| Voltage Mode | |||||
| Ranges | ±50, 20, 10, 5, 2, 1, 0.4, 0.2, 0.1, 0.04 and 0.02 Volt | ||||
| Input Accuracy | Signal frequency | Accuracy | |||
| DC | Range <10 V: ±0.03 % of reading ±0.04 % of range ±10 μV | ||||
| Range ≥10 V: ±0.05 % of reading ±0.01 % of range ±5 mV | |||||
| Up to 1 kHz | ±0.03 % of reading ±0.02 % of range | ||||
| Up to 10 kHz | ±0.1 % of reading ±0.05 % of range | ||||
| Up to 100 kHz | ±2 % of reading ±0.1 % of range | ||||
| Up to 500 kHz | ±10 % of reading ±0.5 % of range | ||||
| Offset accuracy after Balance Amplifier | Range <10 V: ±0.002 % of range ±3 μV; Range ≥10 V: Not performed | ||||
| Typ. Noise floor | Sample rate/Range → | 50 V | 5 V | 0.2 V | 0.02 V |
| 1 MS/s | -87 dB | -88 dB | -81 dB | -63 dB | |
| 200 kS/s | -88 dB | -88 dB | -85 dB | -74 dB | |
| 20 kS/s | <-100 dB | <-100 dB | -94 dB | -84 dB | |
| Typical CMR | Bandwidth/Range → | 50 V | 5 V | 0.2 V | 0.02 V |
| 50 Hz | 70 dB | 88 dB | 102 dB | 102 dB | |
| 400 Hz | 70 dB | 86 dB | 100 dB | 100 dB | |
| 10 kHz | 55 dB | 70 dB | 80 dB | 80 dB | |
| Gain Drift | Typical 10 ppm/K, max. 30 ppm/K | ||||
| Offset Drift | typical 0.3 μV/K + 15 ppm of range/K, max 2 μV/K + 40 ppm of range/K | ||||
| Gain Linearity | <0.02 % | ||||
| Inter channel phase mismatch | 0.02° * fin [kHz] + 0.1° (5 V Range) | ||||
| Channel Cross talk | Range <10 V: -120 dB @ 10 kHz; Range ≥10 V: -95 dB @ 10 kHz | ||||
| Input Coupling (see 1) | DC, AC 1 Hz (3 Hz, 10 Hz per SW) | ||||
| Input Impedance | Range <10 V: 10 MΩ; Range ≥10 V: 1 MΩ between INx to GND | ||||
| Max. common mode voltage | Isolated version: ±500 V | ||||
| Differential version: Ranges ≥10 Volt: ±60 V; all other Ranges: ±12 V | |||||
| Overvoltage Protection | Range <10 V: 100 V (200 V peak for 10 msec); Range ≥10 V: 300 V cont. | ||||
| Excitation Voltage | |||||
| Excitation Voltage | Free programmable (16-bit DAC) | ||||
| Predefined levels | 0, 1, 2.5, 5, 10, 15 and 20 VDC | ||||
| Accuracy | ±0.05 % ±2 mV | ||||
| Drift | ±10 ppm/K ±100 μV/K | ||||
| Load stability 0 % to 100 % load | <0.01 % | ||||
| Line regulation over 20 Ω of change | <0.005 % @ 120 Ω load | ||||
| Noise @ 10 Volt / 350 Ω | < 200 μVrms @ 10 kHz BW | ||||
| Sense Impedance to Exc / to GND | 100 kΩ / 100 MΩ | ||||
| Current limit | 100 mA (max. 800 mW) | ||||
| Protection | Continuous short to ground | ||||
| Input short, Sensor offset adjust | Software selectable | ||||
| Excitation Current | |||||
| Excitation Current | Free programmable (16-bit DAC) | ||||
| Predefined levels | 0.1, 1, 2, 5, 10, 20 and 60 mADC | ||||
| Accuracy (>10 mA) | 0.1 % ±2 μA [0.5 % ±50 μA] | ||||
| Drift (>10 mA) | 15 ppm/K [100 ppm/K] | ||||
| Compliance voltage | 20 Volt, max. 300 mW | ||||
| Output Impedance | >1 MΩ | ||||
| Bridge Connection Types | |||||
| Bridge types | Full / Half / Quarter bridge (3-wire or 4-wire) | ||||
| Ranges | 2 mV/V…1000 mV/V free programmable | ||||
| Internal Bridge Completion | ½ bridge and ¼ bridge 120 Ω and 350 Ω | ||||
| Bridge Completion Accuracy | 0.05 %; TCR: 5 ppm/K (others on request) | ||||
| Internal Shunt Resistor | 59.88 kΩ and 175 kΩ, bipolar (to +Exc and -Exc) | ||||
| Maximum sensor resistance | 5 kΩ for Full and Half bridge measurements | ||||
| Typ. Shunt Resistor Accuracy | 0.05 %; TCR: 10 ppm/K (others on request) | ||||
| Sensor Balance Range | 220 % of Range (70 % for input Range ≥5 Volt) | ||||
| Input Short, Sensor Offset Adjust | Software selectable | ||||
| Counters (only on HS STG+) | |||||
| Inputs | 1 digital counter input 3 digital inputs Fully synchronised with analog data | ||||
| Counter modes | counting, waveform timing, encoder, tacho, gear-tooth sensor | ||||
| General Counter Specifications | See "SIRIUS counter specification" | ||||
| Additional Specifications | |||||
| Input connector | DSUB-9 (others on request) | ||||
| TEDS support | Standard + DSI® adapters | ||||
| 1) In- must be within ±10 V referred to GND (iso); for Ranges ≥10 V the DC value of In- is not rejected | |||||
| Rev: 1593504000 | |||||