Specifiche tecniche degli accessori EtherCAT

Specifiche tecniche di ECAT-SYNC-JUNCTION

EtherCAT SYNC JUNCTION
Interface
Data interfaceEtherCAT®
Data Rate100 Mbps Full Duplex bus speed
Max. Throughput per ChainFrom 6 MB/s to 10 MB/s (see 1)
Sync Accuracy< 200 ns within same EtherCAT chain < 2 µs using sync for multiple EtherCAT chains below 1 sample to Sirius®
EtherCAT®Max. Cable Length 100 m
Max. Number of Units64 or more (power injectors may be required)
Data Interface ConnectionLEMO 1T EtherCAT® hybrid cable Single cable for data, power and sync, daisy chainable
Power specification
Power Supply9-48 V DC
Current8 A DC max
Power ConsumptionTyp. 1.3 W (Max. 1.5 W) (without additional power daisy-chain)
Environmental specification
Operating Temperature-40 to 70°C
Storage Temperature-40 to 85°C
Shock & VibrationShock: SIST EN 60068-2-27:2009 (100 g, 6 ms) Random vibration
1) It depends on the devices connected, numbers of channels, configuration, length of cables and other parameters.
Rev.: 1671516000

Caratteristiche tecniche del DS-HUBe7

DS-HUBe7
Interface
Data interfaceEtherCAT®
Data Rate100 Mbps Full Duplex bus speed
Max. Throughput per ChainFrom 6 MB/s to 10 MB/s (see 1)
Sync Accuracybelow 1 sample to Sirius®
EtherCAT®Max. Cable Length 100 m
Max. Number of Units64 or more (power injectors may be required)
Data Interface ConnectionLEMO 1T EtherCAT® hybrid cable Single cable for data, power and sync, daisy chainable
InputSingle IN port, L1T8m (data only)
Output7x OUT port, L1T8f (data and power from POWER IN)
Power
Power supply24 V typ. (18 - 30 V)
Maximum current10 A typ., 15 A max.
Power consumptionTyp. 4 W (excl. ECAT devices)
Power out
TypeLEMO 2pin female, daisy chain
Output VoltageEqual to input power supply voltage
EtherCAT® Power out
TypeSwitched input supply on EtherCAT® connector, LEMO 8pin female
Maximum current6 A typ.
Output VoltageEqual to input power supply voltage
Environmental
Operating Temperature-25 to 60 °C
Storage Temperature-40 to 85 °C
Humidity5 to 95 % RH non-condensing at 50 °C
IP ratingIP50
Shock & VibrationVibration sweep sinus (EN 60068-2-6:2008) Vibration random (EN 60721-3-2: 1997 - Class 2M2) Shock (EN 60068-2-27:2009) MIL-STD-810D
Physical
Dimensions266 x 139 x 65 mm
Weight1.2 kg
1) It depends on the devices connected, numbers of channels, configuration, length of cables and other parameters.
Rev: 1615809600

Specifiche tecniche di ECAT-REPEATER

Interface
Data interfaceEtherCAT®
Data Rate100 Mbps Full Duplex bus speed
Max. Throughput per ChainFrom 6 MB/s to 10 MB/s (see 1)
Sync Accuracybelow 1 sample to Sirius®
EtherCAT®Max. Cable Length 50 m
Data Interface ConnectionLEMO 1T EtherCAT® hybrid cable Single cable for data, power and sync, daisy chainable
Input connectorL1T8m (data, power and sync)
Output connectorL1T8f (data, power and sync)
Power
Power supply9 - 48 VDC
Maximum currentmax. 7.5 A
Power consumptionTyp. 0.72 W, Max. 1 W
Environmental
Operating Temperature-40 to 85 °C
Storage Temperature-40 to 85 °C
Humidity5 to 95 % RH non-condensing at 50 °C
IP ratingIP67
Shock & VibrationVibration sweep sinus (EN 60068-2-6:2008) Vibration random (EN 60721-3-2: 1997 - Class 2M2) Shock (EN 60068-2-27:2009) MIL-STD-810D
Physical
Dimensions85.3 x 35 x 34 mm (incl. connectors)
Weight190 g
1) It depends on the devices connected, numbers of channels, configuration, length of cables and other parameters.
Torna all'inizio