IOLITE® X Spécifications techniques

Spécifications techniques du système IOLITE® X

IOLITE X
GLAN
Data interfaceEthernet 1 GbE incl. IEEE1588v2 synchronization (PTP IEEE 802.3) (RJ45)
Data Rate1 Gbps
Sync Accuracy100 ns
Bus connectorsEthernet RJ45, single cable for data, power and sync, daisy chainable
Power over Ethernet48 - 57 V DC (PoE++ power delivery)
Max. cable length between devices100 m
Max. Throughput per Chainup to 90W
Internals
CPU typeARM
Operating systemLinux
SoftwareDewesoft RT
Device protocolsopenDAQ, OPC-UA
Power
Power supply9 - 57 V DC
Power supply connectorSCDN-THR 3.81/04/90G 3.2SN BK BX
Environmental
Operating Temperature-40 to 70 °C
Storage Temperature-40 to 85 °C
Humidity95 %, no condensation
IP ratingIP20
ShockShock: SIST EN 60068-2-27:2009 10 g, 6 ms, half-sine 25x pos./neg in each axis 150x total
VibrationRandom: Profile breakpoints: 10 Hz - 0.75 g²/Hz 150 Hz - 0.015 g²/Hz Profile RMS / Peak = 3.5 g / 10.5 g 1 hrs in each axis, 3 hrs total
Physical
Dimensions137 x 119* x 35 (* depending on the front connectors)
Rev: 1712304000

Vue d'ensemble des amplificateurs IOLITE® X

X 8xLVeX 16xLVX 8xACC
ConnectorsTerminal block, DSUB-37Terminal blockBNC
Channels per module8x16x8x
Data rate per channel200 kS/s100 kS/s200 kS/s
Resolution24-bit24-bit24-bit
Bandwidth0.433*fs0.433*fs0.433*fs
Voltage mode ranges±100 V, ±5 V±200 V, ±10 V±10 V, ±5 V, ±1 V, ±200 mV
Input couplingDCDCDC, AC 1 Hz, AC 0.1 Hz
Sensor excitation0...24V (unipolar)2 mA, 4 mA, 6 mA
Bridge connection
Programmable shunt
IEPE input
Resistance
Temperature (PTx)
Thermocouple
Current✓ (ext shunt) (See 1)
Potentiometer✓ (See 1)
LVDT
Charge
TEDS✓ (See 1)
Isolation voltage250 V250 V250V
Isolation arrangementCh-GNDCh-GNDCh-GND
PoE functionality
Advanced functionsHigh isolation, high input rangeHigh isolation, high input rangeIEPE, supports TEDS, high channel density
Rev: 1724155200
1) This functionality will be available with a firmware upgrade.

Spécifications techniques de l'IOLITE-X-8xACC

Analog inputsIOLITE X 8xACC
Input typeVoltage, IEPE
Number of channels8
ADC Type24-bit delta-sigma with anti-aliasing filter (-3 dB @ 160 kHz) Butterworth 2nd order
Sampling RateSimultaneous 200 kS/sec per channel (software-selectable)
Voltage Mode
Voltage Ranges±10 V±5 V±1 V±0.2 V
Input AccuracyDC±0.02 % of reading ±0.02 % of range
Noise floor, Typ.10 kS/s / 100 kS/s / 200 kS/s-116 dB / -107 dB / -105 dB-116 dB / -107 dB / -105 dB-115 dB / -105 dB / -103 dB-105 dB / -95 dB / -93 dB
Dynamic Range, Typ.10 kS/s / 100 kS/s / 200 kS/s-158 dB / -149 dB / -150 dB-156 dB / -150 dB / -150 dB-155 dB / -152 dB / -148 dB-145 dB / -140 dB / -139 dB
CMR, Typ. 0 dBFS sine wave @ 50 Hz / 400 Hz / 1 kHz10 kS/s117 dB / 117 dB / 117 dB117 dB / 115 dB / 116 dB115 dB / 115 dB / 114 dB106 dB / 105 dB / 104 dB
100 kS/s107 dB / 107 dB / 107 dB107 dB / 107 dB / 107 dB105 dB / 105 dB / 104 dB96 dB / 96 dB / 95 dB
200 kS/s106 dB / 106 dB / 106 dB106 dB / 106 dB / 106 dB103 dB / 103 dB / 102 dB93 dB / 93 dB / 93 dB
THD, Typ. -1 dBFS sine wave @ 1 kHz10 kS/s / 100 kS/s / 200 kS/s-105 dB / -103 dB / -99 dB-104 dB / -102 dB / -98 dB-103 dB / -102 dB / -98 dB-101 dB / -101 dB / -99 dB
SFDR, Typ. -1 dBFS sine wave @ 1 kHz10 kS/s / 100 kS/s / 200 kS/s106 dBc / 106 dBc / 101 dBc106 dBc / 105 dBc / 101 dBc106 dBc / 105 dBc / 90 dBc98 dBc / 97 dBc / 90 dBc
SNR, Typ. -1 dBFS sine wave @ 1 kHz10 kS/s / 100 kS/s / 200 kS/s106 dB / 103 dB / 101 dB102 dB / 100 dB / 98 dB104 dB / 99 dB / 88 dB92 dB / 87 dB / 87 dB
Gain Linearity< 0.02 %
Gain DriftTypical 6 ppm/K, max. 15 ppm/K
Offset DriftTypical 0.5 μV/K + 0.5 ppm of range/K, max 2 μV/K + 2 ppm of range/K
Channel Cross talk typ. @ 1 kHz-130 dB-130 dB-130 dB-125 dB
Input CouplingDC, AC 0.1 Hz, 1 Hz
Input Impedance1 MΩ
Overvoltage ProtectionIn+ to In-: 50 V continuous, 200 V peak (10 msec)
Analog input performance
Sample rateSR ≤ 2 kS/sSR > 2 kS/s
Bandwidth (-3 dB)0.489*fs0.433*fs
Alias-free BandwidthDC to 0.44*fsDC to 0.499*fs
Alias Rejection-105 dB (all sample rates)
Delay Through ADC34 / fs
Oversampling128
IEPE input
Excitation2 mA, 4 mA, 6 mA
Excitation accuracy10%
Compliance voltage24 V
Output Impedance>60 kΩ
Sensor detectionShortcut: <4 V; Open: >19 V
Additional Specifications
ModularIOLITE X 8xACC
Input connectorBNC
Isolation voltage250 Vpeak channel to ground
TEDs supportIEPE mode only (class 1)
Power supply9 - 57 V DC, Power over Ethernet: 48 - 57 V DC (PoE++ power delivery)
Power consumptionTB @Typ. 24 V / MAX. 56 VVoltage mode: Typ. 5.88 W / Max. 7.4 W IEPE mode: Typ. 7.3 W @4 mA, 8.6 W @6 mA / Max. 7.9 W@4 mA, 9.3 W @6 mA
PoE @Min. 48 V / MAX. 56 VVoltage mode: min. 7.2 W / Max. 7.6 W IEPE mode: min. 8.5 W @4 mA, 8.9 W @6 mA / Max. 9.2 W@4 mA, 9.5 W @6 mA
Weight600 g
Slice Dimensions137 x 115.0 x 35.0 mm
Rev: 1712304000

Spécifications techniques de l'IOLITE-X-8xLVe

InputsIOLITE X 8xLVe
Input typesVoltage, Potentiometer (See 1), Current (Ext. shunt) (See 1)
Number of channels8
ADC Type24-bit delta-sigma with anti-aliasing filter (-3 dB @ 160 kHz) Butterworth 2nd order
Sampling RateSimultaneous up to 200 kS/s
Voltage Mode
RangesSR±100 V±5 V
Accuracy±0.03 % of reading ±0.02 % of range
Noise floor, Typ.10kS/s/ 100kS/s / 200kS/s-118 dB / -109 dB / -107 dB-103 dB / -93 dB / -90 dB
Dynamic Range, Typ.10kS/s/ 100kS/s / 200kS/s-149 dB / -149 dB / -149 dB-133 dB / -133dB / -132 dB
CMR, Typ. 0 dBFS sine wave @ 50 Hz / 400 Hz / 1 kHz10kS/s-113dB /-102dB /-99dB -100dB /-98dB /-97dB
100kS/s-105dB /-100dB /-98dB -90dB /-89dB /-89dB
200kS/s-103dB /-100dB /-97dB -87dB /-86dB /-86dB
THD, Typ. -1 dBFS sine wave @ 1 kHz10kS/s/ 100kS/s / 200kS/s-94 dB / -94 dB / -94 dB-112 dB / -105 dB / -102 dB
SFDR, Typ. -1 dBFS sine wave @ 1 kHz10kS/s/ 100kS/s / 200kS/s-104 dBc / -93 dBc/ -94 dBc-109 dBc / -107 dBc/ -105 dBc
SNR, Typ. -1 dBFS sine wave @ 1 kHz10kS/s/ 100kS/s / 200kS/s107 dB / 102 dB / 100 dB98 dB / 88 dB / 85 dB
Gain Linearity<0.02 %<0.01 %
Gain DriftTypical 5 ppm/K, Max. 20 ppm/K
Offset DriftTypical 5 ppm of range/K, Max. 10 ppm of range/K
Channel Crosstalk typ. @ 1 kHz -131
Input CouplingDC
Input Impedance800 kΩ (between In+ and In-)
Input Overvoltage ProtectionIn+ to In-: 200 V continuous, 350 Vpeak (100 ms)
Max. common mode voltage±200 V
Isolation250 V functional isolation (channel to power supply ground)
Analog input performance
Sample rateSR ≤ 2 kS/sSR > 2 kS/s
Bandwidth (-3 dB)0.489*fs0.433*fs
Alias-free BandwidthDC to 0.44*fsDC to 0.499*fs
Alias Rejection-105 dB (all sample rates)
Delay Through ADC34 / fs
Oversampling32
Excitation Voltage
Excitation voltageUnipolar 2 ... 24V DC
Current limit2.8 W max. power per channel, 22.4 W per slice
Excitation accuracy0.05 % ± 2 mV
Drift±20 ppm/K ± 60 μV/K
Stability 10 % to 90 % load< 0.06 @ 5 V exc (< 0.01 @ 24 V exc)
Noise @ 10 V / 350 Ω <150 μVrms @ 10 kS
Load regulation over 10 Ω of change< 0.04 % @ 120 Ω load
ProtectionContinuous short to ground
Additional Specifications
ModularIOLITE X 8xLVe
Input connectorTerminal blockDSUB-37
TEDS supportYes
Power supply9 - 57 V DC, Power over Ethernet: 48 - 57 V DC (PoE++ power delivery)
Power consumptionTB @Typ. 24 V / MAX. 56 VAnalog input only: Typ. 5.2 W/ MAX. 7.3 W Excitation: Typ 9.4 W 120 Ω load @ 5 V / 40.7 W 120 Ω load @ 20 V MAX: 11.5W 120 Ω load @ 5 V / 45.7 W 120 Ω load @ 20 V
PoE @min 48 V / MAX. 56 VAnalog input only: min: 7.1W / MAX. 7.5 W Excitation min 11.4 W 120 Ω load @ 5 V / 45.2 W 120 Ω load @ 20 V MAX 11.8 W 120 Ω load @ 5 V / 46.4 W 120 Ω load @ 20 V
Weight615 g610 g
Slice Dimensions137 x 115.0 x 35.0 mm
Rev: 1712304000
1) This functionality will be available with a firmware upgrade.

Spécifications techniques de l'IOLITE-X-16xLV

Analog inputIOLITE X 16xLV
Input typeVoltage
Number of channels16
ADC Type24-bit delta-sigma with anti-aliasing filter (-3 dB @ 160 kHz) Butterworth 2nd order
Sampling RatesSimultaneous up to 100 kS/s
Voltage mode
Voltage ranges±200 V±10 V
Input AccuracyDC±0.03 % of reading ±40 mV±0.03 % of reading ±2 mV
Noise floor, Typ.10 kS/s / 100 kS/s-115dB / -106 dB-102 dB / -95 dB
Dynamic Range10 kS/s / 100 kS/s-154 dB / -146 dB-144 dB / -138 dB
CMR, Typ. -1 dBFS on 10V and -6dB on 200V sine wave @ 1 kHz @ 50 Hz / 400 Hz / 1 kHz10 kS/s-100dB /-100dB /-97dB -100dB /-100dB /-100dB
100 kS/s-101dB /-101dB /-100dB -95dB /-95dB /-94dB
THD, Typ. -1 dBFS on 10V and -6dB on 200V sine wave @ 1 kHz10 kS/s / 100 kS/s-93 dB / -93 dB-106 dB / -102 dB
SFDR, Typ. -1 dBFS on 10V and -6dB on 200V sine wave @ 1 kHz10 kS/s / 100 kS/s95 dBc / 95 dBc107 dBc / 104 dBc
SNR Typ. -1 dBFS on 10V and -6dB on 200V sine wave @ 1 kHz10 kS/s / 100 kS/s94 dB / 94 dB107 dB / 104 dB
Gain Linearity< 0.01 %
Gain DriftTypical 10 ppm/K, Max. 40 ppm/K
Offset DriftTypical 2 ppm of range/K, Max. 5 ppm of range/K
Crosstalk (0 dBFS @ 1 kHz)-115 dB-130 dB
Input CouplingDC
Input Impedance800 kΩ
Max. common mode voltage±200 V
Overvoltage ProtectionIn+ to In-: 200 V continuous, 350 Vpeak (100 ms)
Analog input performance
Sample rateSR ≤ 2 kS/sSR > 2 kS/s
Bandwidth (-3 dB)0.489*fs0.433*fs
Alias-free BandwidthDC to 0.44*fsDC to 0.499*fs
Alias Rejection-105 dB (all sample rates)
Delay Through ADC34 / fs
Oversampling32
Additional Specifications
ModularIOLITE X 16xLV
Input ConnectorsTerminal block 9 pole OMNIMATE SL 2.50 / BLF 2.50/180
Power supply9 - 57 V DC, Power over Ethernet: 48 - 57 V DC (PoE++ power delivery)
Isolation Voltage250 V functional isolation (channel to power supply ground)
Power consumptionTB @Typ. 24 V / MAX. 56 VVoltage mode: Typ. 5.8 W / Max. 7.4 W
PoE @Min. 48 V / MAX. 56 VVoltage mode: Typ. 7.2 W / Max. 7.8W
Weight1250 g
Slice Dimensions137 x 115.0 x 35.0 mm
Rev: 1712304000
Haut de page