Spéc.Techniq. - R1DB/R2DB

R1DB
 
R1DB
R2DB

Dessins techniques

Technical drawings

Spécifications techniques

Computer specification

Computer
Processor Intel® Core™ i3; 2x 2.3 GHz base; 4 threads
Memory 8 GB (optional up to 32 GB)
Storage Non-removable M2 500GB (1 TB as option)
Interfaces and options
USB Front 4x USB 3.0
Ethernet 2x GLAN (RJ45) 2x front, 1x WLAN (RP-SMA Female Jack)
EtherCAT® 1x EtherCAT® 100 Mbps Full Duplex, 8-pin LEMO female
Synchronisation 2x SIRIUS® SYNC
Video 1x HDMI
GPS (option) 10 Hz or 100 Hz or 100 Hz + RTK
GPS display (option) External on DSUB-9 female connector + remote power on
Physical
Weight 0.76 kg
Rev: 1552348800
R1DB
 
R1DB
R2DB
Display
Type 12.1'' TFT
Touch Screen PCAP, Multi-touch
Resolution WXGA, 1280 x 800 pixels @ 60 Hz
Brightness 700 cd/m²
Batteries
Battery type RRC2040-2
Number of batteries 2, hot swappable
Voltage 11.25 V (at fully charged state 13.05 V)
Total capacity of single battery 6.4 Ah
Discharge current of single battery 6.5 A
Wrong polarity protection
Weight of single battery 0.34 kg
Power
Power Supply 9 - 36 V DC
Power Consumption Max. 30 W (Display & Computer)
Power out
Type Switched input supply on 2-pin LEMO female
Maximum power 40 W
Output Voltage
11 - 13 V without external supply, 24 V with external supply
EtherCAT® Power out
Type
Switched input supply on EtherCAT® connector, 8-pin LEMO female
Maximum power 40 W
Output Voltage
11 - 13 V without external supply, 24 V with external supply
Environmental
Operating Temperature 0 to 40 °C
Storage Temperature -20 to 60 °C
Humidity 5 to 95 % RH non condensing @ 40 °C
IP rating IP20
Shock & Vibration
Vibration sweep sinus (EN 60068-2-6:2008)
Vibration random (EN 60721-3-2: 1997 - Class 2M2)
Shock (EN 60068-2-27:2009)
MIL-STD-810D
Physical
Dimensions 331 x 224 x 145 mm
Weight
6.4 kg (excl. SIRIUS® slices)
8.0 kg (std. system, with batteries)
Rev: 1561033800
Display
Type 12.1'' TFT
Touch Screen PCAP, Multi-touch
Resolution WXGA, 1280 x 800 pixels @ 60 Hz
Brightness 700 cd/m²
Batteries
Battery type NL2024HD
Number of batteries 2, hot swappable
Voltage 14.4 V (at fully charged state 16.8 V)
Total capacity of single battery 6.25 Ah
Discharge current of single battery 8 A
Wrong polarity protection
Weight of single battery 0.65 kg
Power
Power Supply 9 - 36 V DC
Power Consumption Max. 30 W (Display & Computer)
Power out
Type Switched input supply on 2-pin LEMO female
Maximum power 60 W
Output Voltage
13 - 16 V without external supply, 24 V with external supply
EtherCAT® Power out
Type
Switched input supply on EtherCAT® connector, 8-pin LEMO female
Maximum power 40 W
Output Voltage
13 - 16 V without external supply, 24 V with external supply
Environmental
Operating Temperature 0 to 40°C
Storage Temperature -20 to 60°C
Humidity 5 to 95 % RH non-condensing at 40 °C
IP rating IP20
Shock & Vibration
Vibration sweep sinus (EN 60068-2-6:2008)\
Vibration random (EN 60721-3-2: 1997 - Class 2M2)
Shock (EN 60068-2-27:2009)
MIL-STD-810D
Physical
Dimensions 332 x 225 x 194 mm
Weight
7.8 kg (excl. SIRIUS® slices)
11 kg (std. system, with batteries)
Rev: 1561033800

Inputs specification

Counter specification

Counter
Timebase 102.4 MHz
Time base accuracy Typical 5 ppm, Max: 20 ppm
Max. Bandwidth 10 MHz
Input Filter 500 ns, 1 μs, 2 μs, 4 μs, 5 μs and 7.5 μs
Input Level Compatibility TTL (Low: <0.8 V, High >2 V)
Input Impedance 100 kΩ pull-up to +3.3 V
Input Protection ±25 Volt continuous
Alarm output Open collector, max. 100 mA / 30 Volt
Sensor supply 5 V / 100 mA; 12 V / 50 mA

CAN specification

CAN bus
Number of ports 1
Interface type CAN 2.0B, up to 1 MBit/sec
Special applications CCP, OBDII, J1939, CAN output
Galvanic isolation Isolated (only on isolated motherboard)
Bus pin fault protection ±36 V
ESD protection 8 kV
Dual core amplifiers
 
Dual core amplifiers
High density amplifiers
High speed amplifiers

Overview

STG STGM MULTI ACC CHG HV LV
Connectors DSUB-9, L2B7f, L2B10f DSUB-9, L2B7f, L2B10f DSUB-15, L2B16f BNC, TNC BNC, TNC BANANA DSUB-9, BNC, BANANA
Counter version
Isolated version
Differential version
EtherCAT version
Rack version
Fanless version ✓(see 1)
Channels per slice 8
Data rate / channel 200 kS/sec USB, 20 kS/sec EtherCAT
Resolution 24-bit dual core
Bandwidth 70 kHz
Voltage ranges ±50 V, ±10 V, ±1 V, ±100 mV ±10 V, ±1 V, ±100 mV, ±10 mV ±10 V, ±1 V, ±100 mV, ±50 mV ±10 V, ±500 mV ±10 V, ±500 mV ±1200 V, ±50 V ±200 V, ±20 V, ±10 V, ±1 V, ±100 mV
Input coupling DC, AC 1 Hz (3, 10 Hz SW) DC DC DC, AC 0.1 Hz, 1 Hz DC, AC 0.1 Hz, 1 Hz, 10 Hz, 100 Hz DC DC, AC 1 Hz (3, 10 Hz SW)
Sensor excitation 0..20 V max. 0.8 W, 0..60 mA max 0.5 W 0..15 V max. 44 mA 0..12 V max. 44mA IEPE 2, 4, 8, 12, 16, 20 mA IEPE 4, 8, 12 mA 2..30 V bipolar, 0..24 V unipolar, max. 0.2 A / 2 W
Bridge connection Full, ½, ¼ 350 Ω, ¼ 120 Ω 3, 4 wire Full, ½, ¼ 350 Ω, ¼ 120 Ω 3 wire Full, ½, ¼ 350 Ω, ¼ 120 Ω 3 wire Full
Programmable shunt 59.88 kΩ, 175 kΩ bipolar 100 kΩ bipolar 59.88 kΩ
IEPE input DSI-ACC DSI-ACC DSI-ACC DSI-ACC
Resistance 100 k, 10 k pC
Temperature (PTx) DSI-RTD DSI-RTD DSI-RTD
Thermocouple DSI-TH DSI-TH DSI-TH DSI-TH
Potentiometer
LVDT DSI-LVDT DSI-LVDT DSI-LVDT DSI-LVDT
Charge DSI-CHG DSI-CHG DSI-CHG 100 k, 10 k pC DSI-CHG
Current ext. shunt,
DSI
ext. shunt,
DSI
ext. shunt,
DSI
ext. shunt ext. shunt ext. shunt,
DSI
TEDS
Isolation voltage 1000 V 1000 V 1000 V 1000 V 1000 V CATII 1000 V 1000 V
Power consumption per channel 2 W/ch 1.3 W/ch 1.3 W/ch 1 W/ch 1.2 W/ch 1 W/ch 1.2 W/ch
Advanced functions Supports all strain types and high input range Low power, sensor and amplifier balance, bipolar shunt Analog Output, Low power, sensor and amplifier balance Sensor error detection, high dynamic range Sensor error detection in IEPE and CHG mode (injection) High voltage, high isolation High sensor power and multi range
(1) Fanless operation only for BNC or Banana version (without excitation)

STG specifications

Inputs
Input types Voltage
Full/Half/Quarter bridge strain (120 Ω and 350 Ω)
Potentiometer, RTD, Resistance
Current (ext. Shunt)
ADC Type 24-bit delta-sigma dual core with anti-aliasing filter
Sampling Rate Simultaneous 200 kS/sec
Dual Core Ranges (Low) ±50 V (±2.5 V) ±10 V (±500 mV) ±1 V (±50 mV) ±100 mV (±5 mV)
Gain accuracy ±0.05 % of reading
Offset accuracy (Dual Core) ±20 (10) mV ±2 (1) mV ±0.2 (0.2) mV ±0.1 (0.1) mV
Offset Accuracy after Balance Amplifier
±1 mV ±0.1 mV ±0.02 mV ±0.01 mV
Typ. Dynamic Range @ 10 kS (Dual Core)
-137 dB (-147 dB) -137 dB (-152 dB) -137 dB (-147 dB) -135 dB (-137 dB)
Typ. Noise floor @ 10kS (Dual Core)
-108 dB (-118 dB) -107 dB (-125 dB) -107 dB (-113 dB) -100 dB (-100 dB)
Typ. CMR @ DC...50 Hz / 400 Hz / 1 kHz
56 / 56 / 56 dB 88 / 86 / 84 dB 97 / 96 / 95 dB 115 / 112 / 102 dB
Gain Drift Typical 10 PPM/K, max. 40 PPM/K
Offset Drift Typical 0.3 μV/K + 2 ppm of range/K, max 0.8 μV/K + 10 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1° (@ 200 kS/sec)
Channel Crosstalk -120 dB @ 10 kHz
Input Coupling DC, AC 1 Hz (3 Hz, 10 Hz per SW)
Input Impedance 1 MΩ between IN+ and IN- for 50 V Range; all other Ranges > 1 GΩ
Max. Common Mode Voltage Isolated version: ±500 V
Differential version: 50 V Range: ±60 V; all other Ranges: ±12 V
Overvoltage Protection 50 V Range: 300 V; all other Ranges: 50 V (200 V peak for 10 msec)
Excitation Voltage
Excitation Voltage Free programmable (16-bit DAC)
Predefined levels 0, 1, 2.5, 5, 10, 15 and 20 VDC
Accuracy ±0.05 % ±2 mV
Drift ±10 ppm/K ±100 μV/K
Load stability 0 % to 100 % load <0.01 %
Noise @ 10V / 350 Ω <150 μVrms @ 10 kS
Line regulation over 20 Ω of change <0.005 % @ 120 Ω load
Sense Impedance to Exc / to GND 100 kΩ / >100 MΩ
Current limit 100 mA (max. 800 mW)
Protection Continuous short to ground
Excitation Current STGv2 STGv3
Excitation Current Free programmable (16-bit DAC)
Predefined levels 0.1, 1, 2, 5, 10, 20 and 60 mA DC
Ranges 0.1 - 10 mA 10 - 60 mA 0.01 - 1 mA 1 - 60 mA
Accuracy 0.1 % ±2 μA 0.5 % ±50 μA preview
0.02 % ±2 μA
preview
0.25 % ±20 μA
Drift 15 ppm/K 100 ppm/K preview
15 ppm/K
preview
100 ppm/K
Compliance voltage 20 Volt, max. 500 mW
Output Impedance >1 MΩ
Bridge Connection Types
Bridge types Full / Half / Quarter bridge (3-wire or 4-wire)
Ranges 2 mV/V…1000 mV/V free programmable with Dual Core
Internal Bridge Completion Half and Quarter bridge 120 Ω and 350 Ω
Typ. Bridge Completion Accuracy 0.05 %; TCR: 2 ppm/K (others on request)
Internal Shunt Resistor 59.88 kΩ, 175 kΩ, software selectable (others on request)
Typ. Shunt Resistor Accuracy 0.05 %; TCR: 10 ppm/K (others on request)
Input Short, Sensor Offset Adjust Software selectable
Counters (only on STG+ type)
Inputs 1 digital counter input
3 digital inputs
Fully synchronised with analog data
Alarm output
Counter Modes counting, waveform timing, encoder, tacho, gear-tooth sensor
General Counter Specifications See "SIRIUS counter specifications"
Additional Specifications
Input connector DSUB-9, 8-pin LEMO-2B, 16-pin LEMO-2B (others on request)
TEDS support Standard + DSI® adapters
Rev: 1583245200

STGM specification

Inputs
Input types Voltage
Full / Half / Quarter bridge strain (120 Ω and 350 Ω)
ADC Type 24-bit delta-sigma dual core with anti-aliasing filter
Sampling Rate Simultaneous 200 kS/sec
Dual Core Ranges (Low range) ±10 V (±500 mV) ±1 V (50 mV) ±100 mV (±5 mV) ±10 mV (±0.5 mV)
Gain accuracy ±0.05 % of reading
Offset accuracy (Dual Core) ±5 (2) mV ±0.5 (0.2) mV ±0.1 (0.1) mV ±0.1 (0.1) mV
Offset accuracy after Balance Amplifier 0.2 mV 0.02 mV 0.02 mV 0.02 mV
Typ. Dynamic Range @ 10 kS (Dual Core) -137 dB (-152 dB) -137 dB (-147 dB) -130 dB (-132 dB) -112 dB (-112 dB)
Typ. Noise floor @ 10 kS (Dual Core) -105 dB (-121 dB) -104 dB (-111 dB) -95 dB (-95 dB) -75 dB (-75 dB)
Typ. CMR @ DC…50 Hz / 400 Hz / 1 kHz 88 / 86 / 84 dB 97 / 96 / 95 dB 111 / 110 / 102 dB 111 / 110 / 102 dB
Gain Drift Typical 10 PPM/K, max. 40 PPM/K
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1° (@ 200 kS/sec)
Channel Crosstalk -120 dB @ 10 kHz
Input Coupling DC
Input Impedance 10 MΩ
Max. Common Mode Voltage Isolated version: ±500 V
Differential version: ±12 V
Overvoltage Protection In+ to In-: 50 V continuous; 200 V peak (10 msec)
Excitation Voltage
Excitation Voltage Free programmable (16-bit DAC)
Predefined levels 0, 1, 2.5, 5, 10 and 15 VDC
Accuracy ±0.05 % ±2 mV
Drift ±50 ppm/K ±100 μV/K
Load stability 0 % to 100 % load <0.01 %
Noise @ 10 V / 350 Ω <150 μVrms @ 10 kS
Line regulation over 20 Ω of change <0.005 % @ 120 Ω load
Sense Impedance 100 kΩ to Exc / >100 MΩ to GND
Current limit 45 mA
Protection Continuous short to ground
Bridge Connection Types
Bridge Types Full / Half / Quarter bridge (3-wire)
Ranges 2 mV/V…1000 mV/V free programmable with Dual Core
Internal Bridge Completion ½ bridge 1 kΩ and ¼ bridge 120 Ω and 350 Ω
Typ. Bridge Completion Accuracy 0.05 %; TCR: 5 ppm/K (others on request)
Internal Shunt Resistor 100 kΩ, software selectable (others on request)
Typ. Shunt Resistor Accuracy 0.05 %; TCR: 10 ppm/K (others on request)
Input Short, Sensor Offset Adjust Software selectable
Counters (only on STGM+ type)
Inputs 1 digital counter input
3 digital inputs
Fully synchronised with analog data
Alarm output
Counter Modes counting, waveform timing, encoder, tacho, gear-tooth sensor
General Counter Specifications counting, waveform timing, encoder, tacho, gear-tooth sensor
Additional Specifications
Input connector DSUB-9, 8-pin LEMO-2B, 16-pin LEMO-2B (others on request)
TEDS support Standard + DSI® adapters

ACC specification

Inputs
Input types Voltage
IEPE
ADC Type 24-bit delta-sigma dual core with anti-aliasing filter
Sampling Rate Simultaneous 200 kS/sec
Ranges (Dual Core Low Range) ±10 V (±500 mV) ±500 mV (NA)
Input Accuracy (Dual Core) ±0.1 % of reading ±10 (1) mV ±0.1 % of reading ±1 (NA) mV
Dynamic Range @ 10 kS (Dual Core) -140 dB (-160 dB) -135 dB (NA)
Typ. Noise floor @ 50 kS (Dual Core) -107 dB (-125 dB) -100 dB (NA)
Typ. CMR @ 50 Hz / 1 kHz 140 / 120 dB 140 / 120 dB
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Typical 0.5 μV/K + 2 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1° (@ 200 kS/sec)
Channel Crosstalk <-160 dB @ 1 kHz
Input Coupling DC, AC 0.1 Hz,1 Hz
Input Impedance 1 MΩ (270 kΩ for AC coupling ≥1 Hz) in parallel with 100 pF
Overvoltage Protection In+ to In-: 50 V continuous; 200 V peak (10 msec)
IEPE mode
Excitation 2, 4, 8, 12, 16 or 20 mA
Compliance voltage 25 Volt
Output Impedance >100 kΩ
Sensor detection Shortcut: <4 Volt; Open: >19 Volt
Counters (ACC+ type only)
Inputs 1 digital counter input
3 digital inputs
Fully synchronised with analog data
Counter Modes counting, waveform timing, encoder, tacho, gear-tooth sensor
General Counter Specifications See "SIRIUS counter specifications"
Additional Specifications
Input connector BNC BNC or TNC (others on request)
TEDS support IEPE mode only

CHG specification

Inputs
Input types Voltage
IEPE
Charge
ADC Type 24-bit delta-sigma dual core with anti-aliasing filter
Sampling Rate Simultaneous 200 kS/sec
Ranges (Dual Core Low Range) ±10 V (500 mV) ±500 mV (NA)
Input Accuracy (Dual Core) ±0.05 % of reading ±5 (0.5) mV ±0.05 % of reading ±0.5 mV
Typ. Dynamic Range @ 10kS (Dual Core) -140 dB (-155 dB) -130 dB (NA)
Typ. Noise floor @ 50 kS (Dual Core) -107 dB (-124 dB) -98 dB (NA)
Typ. CMR @ 50 Hz / 1 kHz 140 dB / 120 dB 140 dB / 120 dB
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Typical 1 μV/K + 5 ppm of range/K, max 5 μV/K + 10 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1° (@ 200 kS/sec)
Channel Crosstalk -180 dB @ 50 Hz; -160 dB @ 1 kHz
Input Coupling DC, AC (0.1 Hz, 1 Hz, 10 Hz or 100 Hz)
Input Impedance 1 MΩ in parallel with 100 pF
Overvoltage Protection In+ to In-: 50 V continuous; 200 V peak (10 msec)
IEPE mode
Excitation 4, 8 or 12 mA
Compliance voltage 25 Volt
Output Impedance >100 kΩ
Sensor detection Shortcut: <4 Volt; Open: >19 Volt
Charge ranges (Low Range) ±100 000 pC (5000 pC) ±10 000 pC (500 pC)
Input accuracy (HPF 0.1 Hz) ±0.5 % of reading ±20 pC ±0.5 % of reading ±5 pC
Dynamic Range @ 10 kS (Dual Core) -130 dB (-150 dB) -120 dB (-140 dB)
SNR @ 50 kS (Dual Core) 107 dB (120 dB) 105 dB (118 dB)
Input coupling 0.01 Hz, 0.03 Hz, 0.1 Hz, 0.5 Hz, 1 Hz, 10 Hz or 100 Hz
Charge injection 1 Vrms, 20 Hz, 0.5 % accuracy
Counters (only in CHG+ type)
Inputs 1 digital counter input
3 digital inputs
Fully synchronised with analog data
Counter modes counting, waveform timing, encoder, tacho, gear-tooth sensor
General counter specifications See "SIRIUS counter specifications"
Additional specifications
Input connector BNC or TNC (others on request)
TEDS support IEPE mode only

HV specification

Inputs Voltage
ADC Type 24-bit delta-sigma dual core with anti-aliasing filter
Sampling Rate Simultaneous 200 kS/sec
Ranges (Dual Core Low Range) ±1200 V (±50 V) ±50 V (NA)
Gain accuracy ±0.05 % of reading
Offset accuracy (Dual Core) ±100 (50) mV ±50 mV
Typ. Dynamic Range @ 10 kS (Dual Core) -142 dB (-158 dB) -132 dB (NA)
Typ. Noise floor @ 50 kS (Dual Core) -107 dB (-120 dB) -95 dB (NA)
Typ. CMR @ 50 Hz / 1 kHz 85 / 60 dB 85 / 60 dB
Gain Drift Typical 5 ppm/K, max. 30 ppm/K
Offset Drift Typical 1 mV/K + 1 ppm of range/K, max 2 mV/K + 5 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.04° * fin [kHz] + 0.2° (@ 200 kS/sec)
Channel Crosstalk -115 dB @ 50 Hz; -90 dB @ 1 kHz
Input Coupling DC
Input Impedance 10 MΩ || 2 pF
Protection class CAT III 600 V; CAT II 1000 V
Overvoltage Protection In+ to In-: 1.8 kVRMS, Inx to GND: 1.4 kVRMS
Additional Specifications
Input connector Banana
TEDS support Not available

LV specification

Inputs
Input types Voltage
Full bridge strain
Current (ext. Shunt)
ADC Type 24-bit delta-sigma dual core with anti-aliasing filter
Sampling Rate Simultaneous 200 kS/sec
Dual Core Ranges (Low Range) ±200 V (10 V) ±10 V (500 mV) ±1 V (50 mV) ±100 mV (5 mV)
Gain accuracy ±0.05 % of reading
Offset accuracy (Dual Core) ±40 (20) mV ±2 (1) mV ±0.2 (0.2) mV ±0.1 (0.1) mV
Offset accuracy after Balance Amplifier 2 mV 0.1 mV 0.02 mV 0.01 mV
Typ. Dynamic Range @ 10 kS (Dual Core) -136 dB (-146 dB) -137 dB (-152 dB) -137 dB (-147 dB) -130 dB (-132 dB)
Typ. Noise floor @ 10 kS (Dual Core) -109 dB (-118 dB) -109 dB (-126 dB) -109 dB (-116 dB) -97 dB (-97 dB)
Typ. CMR @ 50 Hz / 400 Hz / 1 kHz / 10 kHz 70 / 70 / 60 / 55 dB 95 / 95 / 89 / 84 dB
105 / 105 / 100 / 95 dB
115 / 112 / 107 / 102 dB
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max: 2 μV/k + 10 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1° (@ 200 kS/sec and 10 V range)
Channel Crosstalk -120 dB @ 10 kHz (range ≤10 V); -95 dB @ 10 kHz (range = 100 V)
Input Coupling (see 1) DC, AC 1 Hz (3 Hz, 10 Hz per SW)
Input Impedance 200 V Range: 1 MΩ; all other ranges 10 MΩ between IN+ or In- against GND
Max. common mode voltage Isolated version ±500 V
Differential version: 200 V range: ±200 V; all other Ranges: ±12 V
Input Overvoltage Protection 200 V Range: 300 V; all other ranges: 100 V (250 V peak for 10 msec)
Excitation Voltage
Excitation voltage Unipolar or Bipolar Software selectable (programmable with 16-bit DAC)
Excitation Level unipolar 0…24 Volt; Predefined levels: 1, 2.5, 5, 10, 12, 15 and 24 VDC
Excitation Level bipolar 2…30 Volt; Predefined levels: 2.5, 5, 10, 12, 15, 24 and 30 VDC
Accuracy ±0.1 % ±5 mV
Drift ±50 ppm/K ±100 μV/K
Stability 10 % to 90 % load (bipolar) <0.01 %
Current limit 200 mA (2 Watt max. per channel, 12 Watt max. per Slice)
Protection Continuous short to ground
Bridge connection types
Bridge type Full bridge
Ranges @ 10 Vexc(low range) 2 mV/V…1000 mV/V free programmable with Dual Core
Input short, Sensor offset adjust Software selectable
Counters (only on LV+ type)
Inputs 1 digital counter input
3 digital inputs
Fully synchronised with analog data
Alarm output
Counter modes Counting, waveform timing, encoder, tacho, gear-tooth sensor
General Counter Specifications See "SIRIUS counter specifications"
Additional Specifications
Misc function Excitation control monitoring, Amplifier Short, Single Ended/Differential
Input connector DSUB-9, BNC, Banana (others on request)
TEDS support Standard + DSI® adapters
1) In- must be within ±10 V referred to GND (iso); for Ranges >10 V the DC value of In- is not rejected

Overview

HD-STGS HD-LV HD-ACC
Connectors DSUB-9, L1B10f DSUB-9, BNC BNC
Counter version
Isolated version
Differential version
EtherCAT version
Rack version
Fanless version
Channels per slice 16
Data rate / channel 200 kS/sec USB, 10 kS/sec EtherCAT
Resolution 24-bit
Bandwidth 70 kHz
Voltage ranges ±10 V, ±1 V, ±100 mV, ±10 mV ±100 V, ±10 V, ±1 V, ±100 mV ±10 V, ±5 V, ±1 V, ±200 mV
Input coupling DC DC DC, AC 0.1 Hz, 1 Hz
Sensor excitation 0..12 V max. 44 mA
2…30 V bipolar, 0…24 unipolar, max. 0.2 A / 2 W
IEPE 4,8,12 mA
Bridge connection Full, ½, ¼ 350 Ω, ¼ 120 Ω 3-wire Full
Programmable shunt 100 kΩ
IEPE input DSI-ACC DSI-ACC
Resistance
Temperature (PTx) DSI-RTD DSI-RTD
Thermocouple DSI-TH DSI-TH
Potentiometer
LVDT DSI-LVDT DSI-LVDT
Charge DSI-CHG DSI-CHG
Current ext. shunt,
DSI
ext. shunt,
DSI
ext. shunt
TEDS
Isolation voltage 500 V in pairs 500 V in pairs 500 V in pairs
Power consumption per channel 1.3 W/pair 1.3 W/pair 1.3 W/pair
Advanced functions Low power, sensor and amplifier balance High sensor power and multi range Sensor error detection

HD-STGS specification

Inputs
Input types Voltage
Full/Half/Quarter bridge strain (120 Ω and 350 Ω)
Potentiometer
Current (ext. Shunt)
ADC Type 24-bit delta-sigma with anti-aliasing filter
Sampling Rate Simultaneous 200 kS/sec
Ranges ±10 V ±1 V ±100 mV ±10 mV
Gain Accuracy ±0.05 % of reading
Offset Accuracy ±2 mV ±0.2 mV ±0.1 mV ±0.1 mV
Offset Accuracy after Balance Amplifier
±0.2 mV ±0.02 mV ±0.01 mV ±0.01 mV
Dynamic Range @ 10 kS -137 dB -137 dB -130 dB -112 dB
Typ. Noise floor @ 10 kS -105 dB -104 dB -95 dB -75 dB
Typ. CMR @ 400 Hz / 1 kHz 86 / 84 dB 96 / 95 dB 112 / 102 dB 112 / 102 dB
Gain Drift Typical 10 PPM/K, max. 40 PPM/K
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1° (@ 200 kS/sec)
Channel Cross talk -120 dB @ 10 kHz
Input Coupling DC
Input Impedance 10 MΩ
Max. common mode voltage ±12 V
Overvoltage Protection In + to In-: 50 V continuous; 200 V peak (10 msec)
Excitation Voltage
Excitation Voltage Free programmable (16-bit DAC)
Predefined levels 0, 1, 2.5, 5, 10 and 12 VDC
Accuracy ±0.05 % ±2 mV
Drift ±50 ppm/K ±100 μV/K
Stability 10 % to 90 % load <0.01 %
Current limit 45 mA (350 mW max. power)
Protection Continuous short to ground
Bridge Connection Types
Bridge types Full / Half / Quarter bridge (3-wire)
Ranges 2 mV/V…1000 mV/V free programmable
Internal Bridge Completion ½ bridge and ¼ bridge 120 Ω and 350 Ω
Bridge Completion Accuracy 0.05 %; TCR: 5 ppm/K (others on request)
Internal Shunt Resistor 100 kΩ (others on request)
Typ. Shunt Resistor Accuracy 0.05 %; TCR: 10 ppm/K (others on request)
Input Short, Sensor Offset Adjust Software selectable
Additional Specifications
Input connector DSUB-9
TEDS support Standard + DSI® adapters
Rev: 1593385200

HD-LV specification

Inputs
Input types Voltage
Full bridge strain
Current (ext. Shunt)
ADC Type Type 24-bit delta-sigma with anti-aliasing filter
Sampling Rate Simultaneous 200 kS/sec
Ranges ±100 V ±10 V ±1 V ±100 mV
Gain accuracy ±0.05 % of reading
Offset accuracy ± 20 mV ± 2 mV ± 0.2 mV ± 0.1 mV
Dynamic Range @ 10 kS -134 dB -137 dB -137 dB -125 dB
Typ. Noise floor @ 10 kS -104 dB -104 dB -104 dB -95 dB
Typ. CMR @ 400 Hz / 1 kHz 74 / 70 dB 86 / 84 dB 96 / 95 dB 112 / 102 dB
Gain Drift Typical 10 PPM/K, max. 40 PPM/K
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1° (@ 200 kS/sec and 10 V Range)
Channel Cross talk -120 dB @ 10 kHz (Range ≤10 V); -76 dB @ 1 kHz (Range = 100 V)
Input Coupling DC
Input Impedance 1 MΩ for 100 V Range; all other Ranges 10 MΩ
Max. common mode voltage 100 V Range: ±100 V; all other Ranges: ±12 V
Overvoltage Protection In+ to In-: 100 V Range: 200 V; all other Ranges: 50 V (200 V for 10 msec)
Excitation Voltage
Excitation Voltage Unipolar or Bipolar Software selectable
Free programmable (16-bit DAC)
Excitation Level unipolar 0…24 Volt; Predefined levels: 1, 2.5, 5, 10, 12, 15, 20 and 24 VDC
Excitation Level bipolar 2…30 Volt; Predefined levels: 2.5, 5, 10, 12, 15, 24 and 30 VDC
Accuracy ±0.1 % ±5 mV
Drift ±50 ppm/K ±100 μV/K
Stability 10 % to 90 % load <0.01 %
Current limit 100 mA (1 Watt max. per Channel, 12 Watt max. per Slice)
Protection Continuous short to ground
Bridge Connection Types Full bridge
Ranges @ 10 VExc 2 mV/V…1000 mV/V free programmable
Sensor Offset Adjust Software selectable
Additional Specifications
Input connector DSUB-9, BNC (others on request)
TEDS support Standard + DSI® adapters
Rev: 1593385200

HD-ACC specification

Inputs
Input types Voltage
IEPE
ADC Type Type 24-bit delta-sigma with anti-aliasing filter
Sampling Rate Simultaneous 200 kS/sec
Ranges ±10 V ±5 V ±1 V ±200 mV
Gain accuracy ±0.05 % of reading
Offset accuracy ±2 mV ±1 mV ±0.2 mV ±0.1 mV
Typ. Dynamic Range @ 10 kS -137 dB -137 dB -137 dB -131 dB
Typ. Noise floor @ 10 kS -109 dB -109 dB -108 dB -102 dB
Typ. CMR @ 400 Hz / 1 kHz 140 dB / 120 dB
Gain Drift Typical 10 PPM/K, max. 30 PPM/K
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1° (@ 200 kS/sec and 10 V Range)
Channel Cross talk -150 dB @ 50 Hz; -140 dB @ 1 kHz
Input Coupling DC, AC 0.1 Hz, 1 Hz
Input Impedance 1 MΩ (270 kΩ for AC coupling ≥ 1 Hz) in parallel with 100 pF
Over-voltage Protection In+ to In-: 50 V continuous; 200 V peak (10 msec)
In- to GND (differential version): 3 Volt
IEPE mode
Excitation 4, 8 or 12 mA
Compliance voltage 22 Volt
Output Impedance >100 kΩ
Sensor detection Shortcut: <4 Volt; Open: >10 Volt
Additional Specifications
Input connector BNC
TEDS support IEPE mode only
Rev: 1593385200

Overview

HS-HV HS-LV HS-ACC HS-CHG HS-STG
Connectors BANANA
DSUB-9, BNC, BANANA
BNC BNC, TNC DSUB-9
Counter version
Isolated version
Differential version
EtherCAT version
Rack version
Fanless version ✓ (see 1)
Channels per slice 8
Data rate / channel
1 MS/sec USB
Resolution 16-bit
Bandwidth 2 MHz 1 MHz 500 kHz 500 kHz 1 MHz
Voltage ranges ±1600 V … ±20 V ±100 V … ±50 mV ±10 V … ±100 mV ±10 V … ±100 mV ±50 V … ±20 mV
Input coupling DC DC, AC 1 Hz (3, 10 Hz SW) DC, AC 1 Hz (3, 10 Hz SW) DC, AC 0.1 Hz, 1 Hz, 10 Hz, 100 Hz DC, AC 1 Hz (3, 10 Hz SW)
Sensor excitation 2…30 V bipolar, 0…24 V unipolar, max. 0.2 A / 2 W IEPE 4.8 mA IEPE 4, 8, 12 mA 0…20 V max. 0.8 W, 0..60 mA max 0.5 W
Bridge connection
Full Full, ½, ¼ 350 Ω, ¼ 120 Ω, 3 or 4 wire
Programmable shunt
59.88 kΩ, 175 kΩ bipolar
IEPE input DSI-ACC DSI-ACC
Resistance
Temperature (PTx)
DSI-RTD
Thermocouple DSI-TH DSI-TH
Potentiometer
LVDT DSI-LVDT DSI-LVDT
Charge DSI-CHG 1 k …100 k pC DSI-CHG
Current ext. shunt,
DSI
ext. shunt ext. shunt ext. shunt,
DSI
TEDS
Isolation voltage CATII 1000 V 1000 V 1000 V 1000 V 1000 V
Power consumption per channel 1 W/ch 1.2 W/ch 2 W/ch 1.2 W/ch 2 W/ch
Advanced functions
High voltage, high bandwidth, high isolation High sensor power and multi range Sensor error detection, high speed Sensor error detection in IEPE and CHG mode (injection) High speed, supports all strain types and high input range
(1) Fanless operation only for BNC or Banana version (without excitation)

HS general specifications

ADC
Type 16-bit SAR
Sampling Rate Simultaneous 1 MS/sec
Analog anti alias filter Bypass or analog 100 kHz 5th order Bessel
Digital low pass filter Software selectable
Digital filter Characteristic Bypass, Butterworth or Bessel
Filter Order 2nd , 4th, 6th or 8th
Ratio Sample rate to Filter Freq. From 2 to 100
Topology Cascaded IIR Filter (up to 4 sections)

HS-HV

Inputs
Input types Voltage
ADC Type 16-bit SAR
Sampling Rate Simultaneous 1 MS/sec
Filtering See "HS general specifications"
Analogue bandwidth 2 MHz
Voltage ranges ±1600 V, ±800 V, ±400 V, ±200 V, ±100 V, ±50 V, ±20 V
Input Accuracy (see 1) Signal frequency Accuracy
DC ±0.03 % of reading ±0.02 % of range ±0.04 V
Up to 1 kHz ±0.03 % of reading ±0.02 % of range
Up to 10 kHz ±0.1 % of reading ±0.05 % of range
Up to 100 kHz ±2 % of reading ±0.1 % of range
Up to 1000 kHz ±5 % of reading ±0.5 % of range
Typ. Noise floor Bandwidth/Range → 1600 V 400 V 100 V
2 MHz -83 dB -79 dB -71 dB
100 kHz -85 dB -85 dB -82 dB
10 kHz -100 dB -97 dB -90 dB
Typ. CMR @ 50 Hz / 1 kHz / 10 kHz 85 dB / 75 dB / 50 dB
Gain Drift Typical 10 ppm/K, max. 40 ppm/K
Offset Drift Typical 1 mV/K + 1 ppm of range/K, max 2 mV/K + 5 ppm of range/K
Gain Linearity <0.02 %
Channel Cross talk -115 dB @ 50 Hz; -90 dB @ 1 kHz
Input Coupling DC
Input Impedance 10 MΩ || 2 pF
Protection class CAT III 600 V; CAT II 1000 V
Over-voltage Protection In+ to In-: 1.8 kVRMS, Inx to GND: 1.4 kVRMS
Additional Specifications
Input connector Banana
TEDS support NA
1) 50 V Range (1.2 MHz) and 20 V range (700 kHz) have limited bandwidth
Rev: 1593504000

HS-LV

Inputs
Input types Voltage
Full bridge strain
Current (ext. Shunt)
ADC Type 16-bit SAR
Sampling Rate Simultaneous 1 MS/sec
Filtering See "HS general specifications"
Analogue bandwidth 1 MHz (800 kHz for ranges ≤0.2 V)
Voltage ranges ±100, 50, 20, 10, 5, 2, 1, 0.5, 0.2, 0.1 and 0.05 Volt
Input Accuracy Signal frequency Accuracy
DC ±0.03 % of reading ±0.02 % of range ±100 μV (2 mV for Ranges ≥10 Volt)
Up to 1 kHz ±0.03 % of reading ±0.02 % of range
Up to 10 kHz ±0.1 % of reading ±0.05 % of range
Up to 100 kHz ±2 % of reading ±0.1 % of range
Up to 1000 kHz ±5 % of reading ±0.5 % of range
Offset accuracy after Balance Amplifier Range <10 V: ±0.002 % of range ±3 μV; Range ≥10 V: ±0.005 % of range
Typ. Noise floor Bandwidth/Range → 100 V 5 V 0.5 V 0.05 V
1 MHz -85 dB -86 dB -78 dB -59 dB
100 kHz -88 dB -88 dB -87 dB -76 dB
10 kHz <-100 dB <-100 dB -95 dB -86 dB
Typical CMR Bandwidth/Range → 100 V 5 V 0.5 V 0.05 V
50 Hz 70 dB 88 dB 102 dB 102 dB
400 Hz 70 dB 86 dB 100 dB 100 dB
10 kHz 55 dB 70 dB 80 dB 80 dB
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity <0.02 %
Inter channel phase mismatch 0.02° * fin [kHz] + 0.1° (5 V Range)
Channel Cross talk Range <10 V: -120 dB @ 10 kHz; Range ≥10 V: -95 dB @ 10 kHz
Input Coupling (see 1) DC, AC 1 Hz (3 Hz, 10 Hz per SW)
Input Impedance Range <10 V: 10 MΩ; Range ≥10 V: 1 MΩ || 110 pF between INx to GND
Max. Common Mode Voltage Isolated version: ±500 V
Differential version: Ranges ≥10 Volt: ±100 V; all other Ranges: ±12 V
Overvoltage Protection Range <10 V: 100 V (200 V peak for 10 msec); Range ≥10 V: 300 V cont.
Excitation Voltage
Excitation Voltage Unipolar or Bipolar Software selectable
Free programmable (16-bit DAC)
Excitation Level unipolar 0…24 Volt; Predefined levels: 1, 2.5, 5, 10, 12, 15, 20 and 24 VDC
Excitation Level bipolar 2…30 Volt; Predefined levels: 2.5, 5, 10, 12, 15, 24 and 30 VDC
Accuracy ±0.1 % ±5 mV
Drift ±50 ppm/K ±100 μV/K
Stability 10 % to 90 % load (bipolar) <0.01 %
Current limit 200 mA (2 Watt max. per Channel, 12 Watt max. per Slice)
Protection Continuous short to ground
Input short, Sensor offset adjust Software selectable
Counters (only on HS-LV+ type)
Inputs 1 digital counter input
3 digital inputs
Fully synchronised with analog data
Counter modes counting, waveform timing, encoder, tacho, gear tooth sensor
General Counter Specifications See "SIRIUS counter specification"
Additional Specifications
Input connector DSUB-9, Banana, BNC (others on request)
TEDS support Standard + DSI® adapters
1) In- must be within ±10 V referred to GND (iso); for Ranges ≥10 V the DC value of In- is not rejected
Rev: 1593504000

HS-ACC

Inputs
Input types Voltage
IEPE
ADC Type 16-bit SAR
Sampling Rate Simultaneous 1 MS/sec
Filtering See "HS general specifications"
Analogue bandwidth 500 kHz
Voltage ranges ±10 Volt ±5 Volt ±1 Volt ±0.2 Volt
Input Accuracy ±0.05 % of reading
Offset Accuracy ±2 mV ±1 mV ±0.2 mV ±0.1 mV
Typ. Noise floor @ 100 kHz -89 dB -89 dB -86 dB -83 dB
Typ. CMR @ 50 Hz / 400 Hz / 1 kHz 120 / 96 / 88 dB 126 / 100 / 92 dB
140 / 110 / 102 dB
140 / 118 / 110 dB
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Typical 0.5 μV/K + 10 ppm of range/K, max 3 μV/K + 20 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1°
Channel Cross talk -83 dB
Input Coupling DC or AC (1 Hz)
Input Impedance 1 MΩ
Overvoltage Protection 50 V continuous; 200 V peak (10 msec)
IEPE mode
Excitation 4 or 8 mA
Compliance voltage 25 Volt
Output Impedance >100 kΩ
Sensor detection Shortcut: <4 Volt; Open: >19 Volt
Counters (HS-ACC+ type only)
Inputs 1 digital counter input
3 digital inputs
Fully synchronised with analog data
Counter Modes counting, waveform timing, encoder, tacho, gear-tooth sensor
General Counter Specifications See "SIRIUS counter specification"
Additional Specifications
Input connector BNC
TEDS support IEPE mode only
Rev: 1593385200

HS-CHG

Inputs
Input types Voltage
IEPE
Charge
ADC Type 16-bit SAR
Sampling Rate Simultaneous 1 MS/sec
Filtering See "HS general specifications"
Analogue bandwidth (see 1) 500 kHz
Voltage ranges ±10, ±5, ±2, ±1, ±0.5, ±0.2, ±0.1 Volt
Input Accuracy Signal frequency Accuracy
DC ±0.05 % of reading ±0.02 % of range ±50 μV
up to 10kHz ±0.1 % of reading ±0.05 % of range
up to 100kHz ±2 % of reading ±0.1 % of range
Typ. Noise floor Bandwidth/Range → 10 V 5 V 1 V 0.1 V
1 MHz -88 dB -87 dB -85 dB -68 dB
100 kHz -89 dB -89 dB -88 dB -83 dB
10 kHz <-100 dB <-100 dB <-100 dB -92 dB
Typical CMR 50 Hz / 1 kHz >140 / 120 dB >140 / 124 dB >140 / 126 dB >140 / 126 dB
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Typical 0.5 μV/K + 10 ppm of range/K, max 3 μV/K + 20 ppm of range/K
Gain Linearity <0.02 %
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1°
Channel Cross talk -110 dB @ 1 kHz; -90 dB @ 10 kHz
Input Coupling DC or AC (0.1 Hz, 1 Hz, 10 Hz or 100 Hz)
Input Impedance 1 MΩ / 100 pF
Overvoltage Protection 50 V continuous; 200 V peak (10 msec)
IEPE mode
Excitation 4 or 8 mA
Compliance voltage 25 Volt
Output Impedance >100 kΩ
Sensor detection Shortcut: <4 Volt; Open: >19 Volt
Charge ranges ±100 000, 50 000, 20 000, 10 000, 5000, 2000, 1000 pC
Input Accuracy ±0.5 % of reading ±0.05 % of range ±2 pC
Input Coupling 0.01 Hz, 0.03 Hz, 0.1 Hz, 0.5 Hz, 1 Hz, 10 Hz or 100 Hz
Counters (only on HS-CHG+ type)
Inputs 1 digital counter input
3 digital inputs
Fully synchronised with analog data
Counter Modes counting, waveform timing, encoder, tacho, gear-tooth sensor
General Counter Specifications See "SIRIUS counter specification"
Additional Specifications
Input connector BNC (others on request)
TEDS support IEPE mode only
1) 200 kHz for Charge ranges
Rev: 1593385200

HS-STG

Inputs
Input types Voltage
Full/Half/Quarter bridge strain (120 Ω and 350 Ω)
Potentiometer, RTD, Resistance
Current (ext. Shunt)
ADC Type 16-bit SAR
Sampling Rate Simultaneous 1 MS/sec
Filtering See "HS general specifications"
Analogue bandwidth 1 MHz (800 kHz for ranges ≤0.2 V)
Voltage ranges ±50, 20, 10, 5, 2, 1, 0.4, 0.2, 0.1, 0.04 and 0.02 Volt
Input Accuracy Signal frequency Accuracy
DC Range <10 V: ±0.03 % of reading ±0.04 % of range ±10 μV
Range ≥10 V: ±0.05 % of reading ±0.01 % of range ±5 mV
Up to 1 kHz ±0.03 % of reading ±0.02 % of range
Up to 10 kHz ±0.1 % of reading ±0.05 % of range
Up to 100 kHz ±2 % of reading ±0.1 % of range
Up to 500 kHz ±10 % of reading ±0.5 % of range
Offset accuracy after Balance Amplifier Range <10 V: ±0.002 % of range ±3 μV; Range ≥10 V: Not performed
Typ. Noise floor
Bandwidth/Range →
50 V 5 V 0.2 V 0.02 V
1 MHz -87 dB -88 dB -81 dB -63 dB
100 kHz -88 dB -88 dB -85 dB -74 dB
10 kHz <-100 dB <-100 dB -94 dB -84 dB
Typical CMR
Bandwidth/Range →
50 V 5 V 0.2 V 0.02 V
50 Hz 70 dB 88 dB 102 dB 102 dB
400 Hz 70 dB 86 dB 100 dB 100 dB
10 kHz 55 dB 70 dB 80 dB 80 dB
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift typical 0.3 μV/K + 15 ppm of range/K, max 2 μV/K + 40 ppm of range/K
Gain Linearity <0.02 %
Inter channel phase mismatch 0.02° * fin [kHz] + 0.1° (5 V Range)
Channel Cross talk Range <10 V: -120 dB @ 10 kHz; Range ≥10 V: -95 dB @ 10 kHz
Input Coupling (see 1) DC, AC 1 Hz (3 Hz, 10 Hz per SW)
Input Impedance Range <10 V: 10 MΩ; Range ≥10 V: 1 MΩ between INx to GND
Max. common mode voltage Isolated version: ±500 V
Differential version: Ranges ≥10 Volt: ±60 V; all other Ranges: ±12 V
Over voltage Protection Range <10 V: 100 V (200 V peak for 10 msec); Range ≥10 V: 300 V cont.
Excitation Voltage
Excitation Voltage Free programmable (16-bit DAC)
Predefined levels 0, 1, 2.5, 5, 10, 15 and 20 VDC
Accuracy ±0.05 % ±2 mV
Drift ±10 ppm/K ±100 μV/K
Load stability 0 % to 100 % load <0.01 %
Line regulation over 20 Ω of change <0.005 % @ 120 Ω load
Noise @ 10 Volt / 350 Ω < 200 μVrms @ 10 kHz BW
Sense Impedance to Exc / to GND 100 kΩ / 100 MΩ
Current limit 100 mA (max. 800 mW)
Protection Continuous short to ground
Input short, Sensor offset adjust Software selectable
Excitation Current
Excitation Current Free programmable (16-bit DAC)
Predefined levels 0.1, 1, 2, 5, 10, 20 and 60 mADC
Accuracy (>10 mA) 0.1 % ±2 μA [0.5 % ±50 μA]
Drift (>10 mA) 15 ppm/K [100 ppm/K]
Compliance voltage 20 Volt, max. 300 mW
Output Impedance >1 MΩ
Bridge Connection Types
Bridge types Full / Half / Quarter bridge (3-wire or 4-wire)
Ranges 2 mV/V…1000 mV/V free programmable
Internal Bridge Completion ½ bridge and ¼ bridge 120 Ω and 350 Ω
Bridge Completion Accuracy 0.05 %; TCR: 5 ppm/K (others on request)
Internal Shunt Resistor 59.88 kΩ and 175 kΩ, bipolar (to +Exc and -Exc)
Typ. Shunt Resistor Accuracy 0.05 %; TCR: 10 ppm/K (others on request)
Sensor Balance Range 220 % of Range (70 % for input Range ≥5 Volt)
Input Short, Sensor Offset Adjust Software selectable
Counters (only on HS STG+)
Inputs 1 digital counter input
3 digital inputs
Fully synchronised with analog data
Counter modes counting, waveform timing, encoder, tacho, gear-tooth sensor
General Counter Specifications See "SIRIUS counter specification"
Additional Specifications
Input connector DSUB-9 (others on request)
TEDS support Standard + DSI® adapters
1) In- must be within ±10 V referred to GND (iso); for Ranges ≥10 V the DC value of In- is not rejected
Rev: 1593504000