SIRIUS® XHS 4xHV, 4xLV 기술 사양
전력 분석 사양
| Functionality | Dewesoft Power Analyzer |
|---|---|
| Power Analysis for DC and AC | ✓ |
| Power Analysis P | P, Q, S, PF, cos phi, D (Distortion), DH (Harmonic distortion), QH (reactive power of harmonics) (for each phase and total) |
| Fundamental Power | P_H1, Q_H1, S_H1, cos phi_H1, phi_H1 (for each phase and total) |
| Voltage and Current | RMS, RM (star and delta) |
| Energy Calculation | Total, positive and negative (e.g. Recuperation) |
| Efficiency | ✓ |
| Wiring Schematics | DC, 1-phase, 2-phase, 3-phase delta, 3-phase star, 3-phase V, 3-phase Aron, 3-phase two meters, 6-phase (R2, R4, R8), 7-phase (R2, R4, R8, 12-phase (R4, R8)) |
| Star-Delta Calculation | ✓ (waveform and RMS values) |
| Frequencies | 16.7 Hz, 25 Hz, 50 Hz, 60 Hz, 400 Hz, 800 Hz, Variable from 10 Hz up to 3 kHz |
| Frequency Source | Voltage, current, external |
| Period Values | U, I, P, Q, S, symmetrical components for 1⁄2, 1, 2 or 4 periods and selectable Overlap up to 99 % |
| Power Averaging | Selectable - starting from 1 ms , Multiple Averaging (e.g. 20 ms, 60 s, 600 s) possible |
전력 품질 분석 사양
| Functionality | Dewesoft Power Analyzer |
|---|---|
| Harmonics (according to IEC61000-4-7) | up to 150 kHz for voltage, current, active-, reactive power, phase angle and impedance |
| Variable Sidebands and Half Sidebands (according to IEC61000-4-7) | ✓ |
| Harmonic Smoothing Filter (according to IEC61000-4-7) | ✓ |
| Interharmonics (according to IEC61000-4-7) | ✓ |
| Total Harmonic Distortion (THD) (according to IEC61000-4-7) | Voltage and current (Total, odd and even) - selectable up to 150 kHz |
| Total Interharmonic Distortion (TIHD) and K-factor (according to IEC61000-4-7) | Voltage and current (Total, odd and even) - selectable up to 150 kHz |
| Higher Frequencies (according to IEC61000-4-7) | up to 150 kHz (grouping in 200 Hz and 2 kHz bands) |
| Flicker (according to IEC61000-4-15) | selectable PST and PLT |
| Flicker Emission (according to IEC61400-21) | ✓ |
| Rapid Voltage Changes (according to IEC61000-4-15) | selectable steady state and hysteresis |
| Symmetrical Components (according to IEC61000-4-30) | Zero-, positive- & negative system for voltage and current (absolute or relative to fundamental) |
| Additional Symmetrical Components (according to IEC61400-21) | Active and reactive parts for zero-, positive- & negative system |
전력 분석기 소프트웨어 사양
| Software specifications | |
|---|---|
| Functionality | Dewesoft Power Analyzer |
| Power Analysis | ✓ |
| Power Quality Analysis | ✓ |
| Database Storing | ✓ |
| Post Processing | ✓ |
| Math Library | ✓ |
| Data logging - Raw data storing | ✓ (data Storing at Full Sampling rate up to 15 MS/s per channel) |
| Scope | ✓ (up to 8 graphs in one diagram, Zoom In- and Out) |
| Vector Scope | ✓ (1-, 2-, 3-phase systems, Clarke transform, Park transform) |
| FFT | ✓ (up to 1⁄2 of Sampling Rate) |
| Harmonic FFT | ✓ (up to 1⁄4 of Sampling Rate) |
| Transient Recording | ✓ (up to 15 MS/s) |
| Triggering Channels | Analog, Digital, Counter, Math, Power, etc. |
| Triggering options | Simple edge (rising, falling), Window (two-levels: entering, leaving), Pulsewidth |
| (longer or shorter than duration), Window and Pulsewidth, Slope Trigger (rising or | |
| falling slope with steepness) | |
| Motor Efficiency Analysis | ✓ (available as an upgrade) |
| Efficiency mapping | ✓ |
주파수 정확도
| Line frequency | Accuracy |
|---|---|
| 16.67 ... 60 Hz | 0.0005 % of reading |
| 400 Hz | 0.01 % of reading |
| 800 Hz | 0.02 % of reading |
| Variable | 0.05 % of reading |
| Condition: SR > 50 * fin | |
SIRIUS® XHS 시스템 사양.
| Power specs | |
|---|---|
| Power Supply | 9 - 48 V DC |
| Power consumption | Typ. 30 W |
| Environmental | |
| Operating Temperature | -10 to 50 °C |
| Storage Temperature | -40 to 85 °C |
| Humidity | 5 to 95 % RH non condensing @ 60 °C |
| IP rating | IP20 |
| Shock & Vibration | Shock (EN 60068-2-27:2009) 75 g, 6 ms, half-sine (25x pos./neg in each axis) Random Vibration (EN 60721-3-2: 1997 - Class 2M2) Sweep sinus Vibration (EN 60068-2-6:2008) |
| Dimensions | 266 mm x 149 mm x 55 mm 266 mm x 149 mm x 69 mm (extended slice) |
| Interfaces | |
| Ethernet | 1 GbE (XCP, OPC UA) incl. IEEE1588v2 synchronization (PTP) (RJ45) |
| USB | USB 3.0 (Type C) |
| CAN | CAN 2.0, CAN-FD (DSUB9) |
| Sync Input/Ouput | |
| Level (Input/Output) | TTL compatible |
| Max. Output Current | ±24 mA (±50 mA for 1 sec) |
| Synchronization | |
| Delay between slices | ± 1 μs ( to the reference clock ) |
| Max. Sync-cable length | 100 m (Master/Slave), 200 m (IRIG) |
SIRIUS® XHS HybridADC 사양
| ADC | |
|---|---|
| Type | Hybrid ADC |
| High bandwidth mode | 16 bit SAR, up to 15 MS/s |
| Alias free mode | 24 bit Sigma Delta, up to 2 MS/s |
| Digital low pass filter | Software selectable (off, alias free) |
| Analog HW filter | Analog 1 MHz 6th order (Butterworth) |
| Alias free filter | 0.5*fs cutoff, 0.45*fs pass band, 0.55*fs stop band to -100dB, zero phase distortion, available below 2MS/s |
SIRIUS® XHS HybridADC 필터링 사양
| Filter Mode | High-bandwidth | 1 MHz LPF | High-dynamic |
|---|---|---|---|
| Max. SR | 15 MS/s | 15 MS/s | 2 MS/s |
| SW settings | Off | 1 MHz | AAF |
| Bandwidth (-3 dB) | 5 MHz | 1 MHz | 0.49 fs |
| Passband frequency (-0.1 dB) | 500 kHz | 500 kHz | 0.45 fs |
| Passband flatness | ± 0.1 dB | ± 0.1 dB | ± 0.1 dB |
| Alias-free bandwidth | ✗ | 7.5 MHz | 0.45 fs |
| HW filter | ✗ | ✓ | ✓ |
| Stopband frequency | ✗ | 7.5 MHz | 0.55 fs |
| Stopband attenuation | ✗ | -100 dB | -100 dB |
SIRIUS® XHS 디지털 카운터 사양
| Counter Input | |
|---|---|
| Input Channels (See 1) | 8 |
| Modes | Event counting, waveform timing, encoder, tacho, geartooth,... |
| Counter timebase | 150 MHz |
| Time base accuracy | Typical: 0.5 ppm, Max: 2 ppm |
| Max. Bandwidth | 15 MHz |
| Max. Sampling Rate | 5 MS/s |
| Input Filter | Off, 500 ns, 1 μs, 2 μs, 4 μs, 5 μs and 7.5 μs |
| Counter resolution | 32-bit |
| Input Compatibility, Level | 3.3 V TTL/CMOS (Low: <0.8 V, High >2 V) |
| Input termination, impedance | 100 kΩ pull-up to +3.3 V |
| Input Protection | ±25 V continuous |
| Digital Output | |
| Output Channels | 8 connectors, 1 line per connector |
| Output | 5 V digital output |
| Maximum current | 32 mA |
| Output series resistance | 50 Ω |
| Sensor Power Supply | |
| Output Voltage +5 V | 5 V +/- 10 % 500 mA typ. Output short protected (Shared between 8 ports) |
| Output Voltage +12 V (See 2) | 12 V +/-10 % 300 mA typ. Output short protected (Shared between 8 ports) |
| 1) Digital inputs on Counter (individual A, B, Z input) can be used only for Trigger condition 2) Maximum 2x DS-TACHO4 laser probes supported. | |
| Rev: 1702296000 | |
SIRIUS® XHS 앰프 개요
| XHS-HV | XHS-LV | XHS-ACC | |
|---|---|---|---|
| Connectors | BANANA | DB9, BNC, BANANA | BNC |
| Channels per slice | 8 | 8 | 8 |
| Data rate / channel | 15 MS/s | 15 MS/s | 15 MS/s |
| Resolution | 16-bit (24-bit @ 1 MS/s) | 16-bit (24-bit @ 1 MS/s) | 16-bit (24-bit @ 1 MS/s) |
| Bandwidth | 5 MHz | 5 MHz | 5 MHz |
| Voltage ranges | ±2000 V ... ±200 V | ±100 V ... ±50 mV | ±10 V ... ±200 mV |
| Input coupling | DC | DC, AC 1 Hz | DC, AC 0.1 Hz, AC 1 Hz |
| Sensor excitation | ✗ | 2.5..30 V bipolar, 2..24 V unipolar, max. 0.2 A / 2 W | IEPE 2 mA, 4 mA, 8 mA, 12 mA, 16 mA, 20 mA |
| Bridge connection | ✗ | ✗ | ✗ |
| Programmable shunt | ✗ | ✗ | ✗ |
| IEPE input | ✗ | DSI-ACC | ✓ |
| Resistance | ✗ | ✗ | ✗ |
| Temperature (PTx) | ✗ | DSI-RTD | ✗ |
| Thermocouple | ✗ | DSI-TH | ✗ |
| Potentiometer | ✗ | ✗ | ✗ |
| LVDT | ✗ | DSI-LVDT | ✗ |
| Charge | ✗ | DSI-CHG | ✗ |
| Current | ✗ | ext. shunt DSI20mA, DSI5A | ext. shunt |
| TEDS | ✗ | ✓ | ✓ |
| Isolation voltage | CATII 1000 V | 420 Vdc (300 Vacrms) | 140 Vdc (100 Vacrms) |
| Power consumption per channel (typ.) | 1.45 W/ch | 1.55 - 5 W/ch | 1.8 W/ch |
| Advanced functions | High voltage, high bandwidth, high isolation | High sensor excitation and multi range | Sensor error detection, high speed |
| Rev: 1701403200 | |||
SIRIUS® XHS HV 앰프 사양
| Inputs | |||||
|---|---|---|---|---|---|
| ADC Type | Hybrid ADC - alias free up to 2 MS/s, 16-bit up to 15 MS/s | ||||
| Sampling Rate | Simultaneous 15 MS/s | ||||
| Filtering | AAF 1 MHz (6th order) | ||||
| Analog bandwidth (-3 dB) | 5 MHz | ||||
| Voltage Mode | |||||
| Ranges | ±2000 V, ±1000 V, ±400 V, ±200 V | ||||
| Input Accuracy | Signal frequency | Accuracy | |||
| DC to 1 kHz | ±0.03 % of reading ±0.02 % of range | ||||
| Up to 10 kHz | ±0.1 % of reading ±0.05 % of range | ||||
| Up to 100 kHz | ±4 % of reading ±0.1 % of range | ||||
| Up to 1000 kHz | ±5 % of reading ±0.5 % of range | ||||
| Noise floor, Typ. | Sample rate / Range → | 2000 V | 1000 V | 400 V | 200 V |
| 15 MS/s | -84 dB | -82 dB | -79 dB | -75 dB | |
| 1 MS/s | -95 dB | -93 dB | -85 dB | -78 dB | |
| 100 kS/s | -108 dB | -106 dB | -100 dB | -95 dB | |
| 10 kS/s | -117 dB | -115 dB | -109 dB | -104 dB | |
| CMR, Typ. | 101 dB @ 50 Hz, 74 dB @ 400 Hz | ||||
| Channel Crosstalk | -116 dB typ. @ 50 Hz, -89 dB typ. @ 1 kHz | ||||
| Gain Drift | Typical 20 ppm/K, max. 40 ppm/K | ||||
| Offset Drift | Typical 1.5 mV/K + 1 ppm of range/K, max 3 mV/K + 2 ppm of range/K | ||||
| Gain Linearity | < 0.01 % | ||||
| Input Coupling | DC | ||||
| Input Impedance | 10 MΩ | 1 pF | ||||
| Overvoltage category | CAT II 1000 V | ||||
| Maximum input voltage | 2000 Vdc or 2000 Vpk (1414 Vacrms) | ||||
| Additional Specifications | |||||
| Input connector | Banana | ||||
| Rev: 1698322800 | |||||
SIRIUS® XHS LV 앰프 사양
| Inputs | Voltage | ||||
|---|---|---|---|---|---|
| ADC Type | Hybrid ADC - alias free up to 2 MS/s, 16-bit up to 15 MS/s | ||||
| Sampling Rate | Simultaneous 15 MS/s | ||||
| Filtering | AAF 1 MHz (6th order) | ||||
| Analog bandwidth (-3 dB) | 5 MHz | ||||
| Voltage Mode | |||||
| Ranges | ±100, 50, 20, 10, 5, 2.5, 1, 0.5, 0.25, 0.1 and 0.05 V | ||||
| Input Accuracy | DC | ±0.03 % of reading ±0.02 % of range ±100 μV (2 mV for Ranges ≥ 10 V) | |||
| Up to 1 kHz | ±0.03 % of reading ±0.02 % of range | ||||
| Up to 10 kHz | ±0.1 % of reading ±0.05 % of range | ||||
| Up to 100 kHz | ±2 % of reading ±0.1 % of range | ||||
| Up to 1000 kHz | ±5 % of reading ±0.5 % of range | ||||
| Noise floor, Typ. | Sample rate, filter \ Range → | 100 V | 5 V | 0.5 V | 0.05 V |
| 15 MS/s, Filter off | -82 dB | -78 dB | -65 dB | -51 dB | |
| 1 MS/s, Filter on | -94 dB | -95 dB | -88 dB | -69 dB | |
| 100 kS/s, Filter on | -104 dB | -105 dB | -100 dB | -81 dB | |
| 10 kS/s, Filter on | -113 dB | -114 dB | -107 dB | -87 dB | |
| CMR, Typ. | Frequency \ Range → | 100 V | 5 V | 0.5 V | 0.05 V |
| 50 Hz | 91 dB | 102 dB | 98 dB | 100 dB | |
| 400 Hz | 86 dB | 75 dB | 90 dB | 98 dB | |
| 10 kHz | 66 dB | 74 dB | 82 dB | 83 dB | |
| Channel Crosstalk | Range ≥ 10 V: -105 dB @ 10 kHz Range < 10 V: -120 dB @ 10 kHz | ||||
| Gain Drift | Typical 10 ppm/K, max. 30 ppm/K | ||||
| Offset Drift | Range ≥ 10 V: Typ. 100 μV/K + 1 ppm of range/K, Max 250 μV/K + 2 ppm of range/K Range < 10 V: Typ. 4 μV/K + 1 ppm of range/K, Max 8 μV/K + 2 ppm of range/K | ||||
| Gain Linearity | < 0.03 % | ||||
| Input Coupling (see 1) | DC, AC 1 Hz | ||||
| Input Impedance | Range < 10 V: 10 MΩ; Range ≥ 10 V: 1 MΩ | 110 pF between INx to GND | ||||
| Overvoltage Protection | Range ≥ 10 V: 300 V continuous Range < 10 V: 100 V (200 V peak for 10 msec) | ||||
| Max. common mode voltage Isolation voltage | 420 Vdc (300 Vacrms) | ||||
| Excitation Voltage | |||||
| Polarity | Unipolar or Bipolar Software selectable (programmable 16-bit DAC) | ||||
| Excitation Level | Unipolar 1 .. 24 V; Predefined levels: 1, 2, 2.5, 5, 10, 12, 15, 20 and 24 VDC | ||||
| Excitation Level | Bipolar 2.5 .. 30 V; Predefined levels: 2.5, 5, 10, 12, 15, 24 and 30 VDC | ||||
| Drift | ±10 ppm/K ±150 μV/K | ||||
| Stability 10% to 90% load (bipolar) | < 0.01 % | ||||
| Current limit | 200 mA (2 Watt max. per Channel, 12 Watt max. per Slice) | ||||
| Additional Specifications | |||||
| Input connector | DSUB 9, BNC, Banana (others on request) | ||||
| TEDS support | Standard + DSI® adapters | ||||
| Rev: 1701403200 | |||||
| 1) In- must be within ±10 V referred to GND (iso); for Ranges ≥ 10 V the DC value of In- is not rejected | |||||